Attn OCZ Customers - Need Help? Post Here

Scargo · Nov 10, 2005, 04:24 PM

I am getting the new ASUS A8N32-SLI Deluxe motherboard. I will be using an AMD X2 4400+ Toledo, dual-core processor. I'm mounting the Thermalright XP-90 and high CFM fan to it. I will OC some, on air. Perhaps near 3Ghz....
This is my first dual-core processor and this board is supposd to be phenominal for OC'ing with its incremental adjustments of bus speed, PCIe speed and NB to SB freq. plus higher voltages and its new 8 phase power!

So, my question to OCZ is: which memory will perform the best?
I jumped the gun and ordered four sticks of 1Gb Platinum PC 3200....
Would this PC 4000 be better? With this board, adjustments can be made 1Mhz at a time! With so many adjustments on this board it seems the tighter timings of the PC3200 might be better because I could still keep the memory speed within its performance range and go up till I hit the wall on FSB and CPU speed. For this CPU and board combo, what seems right?

I have mentioned before that I am not a "gamer", but I am sure hooked on Photoshop and digital photography. I want blazing performance for that. When I scan in huge files and manipulate them in PS I can waiting 10 minutes for a rotation (and my current PC is no slouch)!
Any suggestions would be appreciated.... Thanks!

*RyderOCZ* · Nov 10, 2005, 05:01 PM

Hi Scargo,

I think you will like that PC3200 Platinum just fine...You aren't going to notice much of a difference in PS with the ram running faster....you will get your performance out of having all that ram.

Are you going to install x64 windows? or Media Center? Those are the only 2 OS that will recognize and use all 4GB in windows. XP SP2 will only use 2.75-3.2 and that is all that will show up in Windows.

3GHz from an X2 is not very realistic...unless I have missed some threads where they are running them that high...These are workstations CPU's not badazz OC'ers....I think you will be very happy with the choice though given you are going to be a true multi-tasker...I have heard glowing reports of these things running about 6 apps at a time without a hiccup.

Judas · Nov 10, 2005, 06:17 PM

think the highest overclock i saw on a 4400+ was just a smidge under 2.9ghz

soloz2 · Nov 10, 2005, 09:00 PM

woot! my ocz platinum rev 2 came today! the only bad thing is I have to work till 9 so I won't get to try them out. As always newegg rocks. ordered on Tues, 3 day shipping and I got them today.

Also, the RAM doesn't have a version number on the left of the sticker so they should be TCCD chips! exactly what I wanted. Goodbye corsair.

*RyderOCZ* · Nov 10, 2005, 09:02 PM

The version number would be in the lower right hand corner of the sticker...very tiny just after the 2-2-2-5 timings.
Sorry if I had said left corner before.

soloz2 · Nov 10, 2005, 09:32 PM

hmm... no I think the guy I talked to on the phone when I called said bottom left corner, which is where I looked.

I just dug out my RAM again and took a closer look. It appears that one stick doesn't have anything after the timings and the other has a very faint number. I can barely make out what appears to be a "v" and then there is a space where a number should be, but it looks like it finishes with an "0."

so it looks kinda like this: "v '.0"

I would assume that this means version 1.0. Since the other stick doesn't say anything is it safe to assume they are both version 1? OCZ wouldn't mix version 1 with version 1.1 would they? that would be two different chips. I sure hope these are the TCCD chips...

*RyderOCZ* · Nov 10, 2005, 09:47 PM

TCCD and TCC5 are the same IC...they just carry a different designation from Samsung....OCZ still bins the chips accordingly for the 3 different speed parts that we run this IC on. PC3200 Rev 2, PC4200 Plat, and PC4800 Plat.

I have a pair of Plat Rev 2 TCC5 sticks that run just fine at 290FSB at 2.5-3-3-7 timings.
TCC5 or TCCD you have the same "chance" that the sticks will clock a lot higher than 200FSB. Not all TCC5 will and not all TCCD will

But...lower right hand corner is where its at...and v1.0 is TCCD...no number at all should also be TCCD.

soloz2 · Nov 10, 2005, 09:54 PM

alright, yeah I got the 3200. I'm hoping they'll be a lot better than my corsair 3200C2

Scargo · Nov 10, 2005, 10:29 PM

I may not be able to do it but No_Style said:
" Over at XS forums, one dude has his 4400+ Toledo (2 x 1 MB L2 Cache) core from 2.2 GHz to 3.0 GHz with Stock Cooling. Although, his voltage is at 1.7 V which I don't recommend using. I believe the 4400+ hit around 2.6 GHz with safe voltages."

I don't think 3GHz sounds reasonable on stock air cooling.....On the other hand, Hot Hardware got 3.12GHz from an Athlon 64 FX-53 on an open bench/air setup with this board. The 8 cycle voltage provided on the board is supposed to keep the CPU cooler.

I do have Windows Pro X64, but haven't loaded it yet. I have lots of questions to get answered before I do that. Like, can I run two platforms (XP Pro and X64 Pro) at the same time (or simultaneosly and partitioned on the same PC)? I'm thinking I will run X64 stripped down for just CS2, scanning and printing until 64 bit becomes more mainstream. I understand drivers are still an issue....

soloz2 · Nov 10, 2005, 10:46 PM

Scargo~
yes you can run a dual boot. I ran both xp pro and x64 pro on my same drives... RAID appears to be one drive. just put them on different partitions.

I am currently running 32bit windows because I couldn't get drivers I liked for my printer. I could get my printer to work via a workaround using drivers for a different printer but I lost all the added features of my HP photo printer. I couldn't choose the higher print qualities and couldn't access the card reader.

Once there are drivers I'm hoping to switch over.

Judas · Nov 11, 2005, 01:49 AM

Hey rayder.. got my machine all rebuilt pretty much completely..

I've got the Gold OCZ 1gb kit (2-2-2-5).... but i'm not completely sure other then the first being CAS.... what the others are for sure as every bios seems to report a different set of letters (tras....trp....etc.)

anyways... i'm going to go copy down the entire list of numbers that are currently set for the ram automatically... only thing i did change was the auto detected 2.5cas (which i would guess would be normal allowing one to start the computer JUST IN CASE cas2 didn't agree with something other then the ram)... anyways.. it's the only thing i set down to 2.. currently running VERY smoothly.... wish however that it was the 2gb platinum kit

i'll report back hopefully shortly.. still installing various things.... (damn. 2mb cache ATA133 HD to a Sata 2 250gb 16mb Cache hd makes a MASSIVE difference)

Judas · Nov 11, 2005, 02:26 AM

Heres what my Ram bios page looks like:

CAS (Tcl) 2
tras 7T
trcd 2T
trp 2
trc 11
trfc 14
tr(erg i can't read my own writing.. something else here) 4
twr 3
1t/2t 2t

*RyderOCZ* · Nov 11, 2005, 05:11 AM

Just set 1T/2T to 1T...you should be in the Blue slots for the ram and everything looks good.
CAS = 2
TRAS = 5 (if you want..shouldn't make any difference)
Trcd = 2
Trp = 2
Trc = 11
Trfc = 14
Trtw or Trwt probably = 4 (3 here if it will boot that way)
Twr = 3
1T/2T = 1T

Judas · Nov 11, 2005, 07:23 AM

sweet deal.. i'll try those settings out tomorrow

thanks again!

Judas · Nov 11, 2005, 10:17 PM

Quote:

Originally Posted by RyderOCZ

Just set 1T/2T to 1T...you should be in the Blue slots for the ram and everything looks good.
CAS = 2
TRAS = 5 (if you want..shouldn't make any difference)
Trcd = 2
Trp = 2
Trc = 11
Trfc = 14
Trtw or Trwt probably = 4 (3 here if it will boot that way)
Twr = 3
1T/2T = 1T

OK tried the above... and wouldn't boot.. so i started backing things up one by one..

Heres what didin't work in order:

Firstly the system wouldn't post: I backed TRTW from 3 to 4.. now it'll post...
However, windows won't load, and the bios won't load either:
Backed Tras down from 5 to 6, now i have no problem posting at all, bios will load fine, windows will start to load then just reboot.
Backed tras again back to the default of 7.... now windows loads fine and i haven't had a crash or hicup yet.

Any suggestion? Or do you think i should be doing pretty damn good?

Will a Trtw of 3 make a big difference? (i haven't attempted to try 3 since changing the tras back to 7)

*RyderOCZ* · Nov 11, 2005, 11:32 PM

I think you are doing pretty well...Trtw from 3 to 4 is not big deal...just a stability tweak

Judas · Nov 12, 2005, 05:22 AM

well... had to set everything back to defaults.. i was getting weird problems in windows.. crashes

Last thing i switched was the 1T/2T setting back to 2T.. haven't had a crash yet

Lowfat · Nov 12, 2005, 03:09 PM

Quote:

Originally Posted by Judas

well... had to set everything back to defaults.. i was getting weird problems in windows.. crashes

Last thing i switched was the 1T/2T setting back to 2T.. haven't had a crash yet

you shouldn't have to run the ram @ 2T. The ram should have no problems running @ 2-2-2-5 @ 1T.

Scargo · Nov 12, 2005, 05:13 PM

I think what Tulcakelume meant to say was "The ram should have no problems running @ 2-2-2-5 @ 1T."

That is, if you are only running two sticks of RAM. I assume you are......
If you have four sticks installed then you have to run 2T.

Lowfat · Nov 13, 2005, 01:00 AM

Quote:

Originally Posted by Scargo

I think what Tulcakelume meant to say was "The ram should have no problems running @ 2-2-2-5 @ 1T."

That is, if you are only running two sticks of RAM. I assume you are......
If you have four sticks installed then you have to run 2T.

ya, opps.

Judas · Nov 13, 2005, 02:36 AM

....like i said.. it's only 2 sticks ..(1gb kit)..

if i run 1T.... various games start to crash and messes up the gui...

even sometimes doesn't post

Lowfat · Nov 13, 2005, 02:51 PM

have you ran memtest at all? sounds to me as if the ram isn't cutting it. My first set of Gold VX did the same thing, however new set runs flawlessly.

*RyderOCZ* · Nov 13, 2005, 10:12 PM

Its the board Judas,

Is this your first 2GB kit of ram or did you have 2GB before?

Also the ram is not rated for 2-2-2-5 operation its 2-3-2-5...were you running 2-2-2?

Judas · Nov 14, 2005, 01:28 AM

Quote:

Originally Posted by RyderOCZ

Its the board Judas,

Is this your first 2GB kit of ram or did you have 2GB before?

Also the ram is not rated for 2-2-2-5 operation its 2-3-2-5...were you running 2-2-2?

i was trying to run the platium kit 2gb variation before... but it didn't work at all.

however, i'm running the 1gb gold kit, it says right on the sticker 2-2-2-5

*RyderOCZ* · Nov 14, 2005, 05:53 PM

Oy, I guess I am all confused then

Yes these should run 2-2-2 at 1T...although this series of Asus board is "famous" for 1T/2T issues at anything over 200FSB.

Are things 100% ok at 1T and 200?

Judas · Nov 14, 2005, 07:36 PM

well i'm trying 1T again... i'll find out later today as i've a whole swack of games installed that range from the very old to the most recent.

Judas · Nov 16, 2005, 11:23 PM

OK, 1T work fairly good for the most part.. but Half Life 2 (CSS) Lineage2 and a few other games tend to crash shortly after starting up the game... probably 1 out of 10 restarts they run fine..

Running benchmarks like prime95 (4 instances) for a few hours doesn't seem to bother it.. no lockups..

these are all at STOCK speeds.. 200mhz fsb... defaults everything else...

soloz2 · Nov 18, 2005, 12:16 AM

have you run memtest? That should let you know if the problems are caused by the RAM or not...

yeah, I can't get my Asus board to run 1T at anything over 240... from what I've read though in real life performance is only about 1-3% less running at 2T and an increase in bandwith will more than make up for the loss of running at 2T.

Judas · Nov 18, 2005, 05:19 AM

yeah.. but i'm only running 200

And i tried my boot CD memtest and it just reboots soon as it starts to load..

*RyderOCZ* · Nov 18, 2005, 05:24 AM

Judas,

Are you maxed out on Voltage? 2.85V for these?

Nov 10, 2005, 04:24 PM	#301
Scargo DriverHeaven Lover Join Date: May 2005 Location: Connecticut Posts: 100 Rep Power: 0	getting new ASUS A8N23-SLI board: advice on RAM I am getting the new ASUS A8N32-SLI Deluxe motherboard. I will be using an AMD X2 4400+ Toledo, dual-core processor. I'm mounting the Thermalright XP-90 and high CFM fan to it. I will OC some, on air. Perhaps near 3Ghz.... This is my first dual-core processor and this board is supposd to be phenominal for OC'ing with its incremental adjustments of bus speed, PCIe speed and NB to SB freq. plus higher voltages and its new 8 phase power! So, my question to OCZ is: which memory will perform the best? I jumped the gun and ordered four sticks of 1Gb Platinum PC 3200.... Would this PC 4000 be better? With this board, adjustments can be made 1Mhz at a time! With so many adjustments on this board it seems the tighter timings of the PC3200 might be better because I could still keep the memory speed within its performance range and go up till I hit the wall on FSB and CPU speed. For this CPU and board combo, what seems right? I have mentioned before that I am not a "gamer", but I am sure hooked on Photoshop and digital photography. I want blazing performance for that. When I scan in huge files and manipulate them in PS I can waiting 10 minutes for a rotation (and my current PC is no slouch)! Any suggestions would be appreciated.... Thanks!

Nov 10, 2005, 09:00 PM	#304
soloz2 DriverHeaven Addict Join Date: Mar 2005 Posts: 362 Rep Power: 0	woot! my ocz platinum rev 2 came today! the only bad thing is I have to work till 9 so I won't get to try them out. As always newegg rocks. ordered on Tues, 3 day shipping and I got them today. Also, the RAM doesn't have a version number on the left of the sticker so they should be TCCD chips! exactly what I wanted. Goodbye corsair. __________________ [COLOR=gray][COLOR=red]CPU:[/COLOR] AMD Opteron 165 CCBBE @ 2.8Ghz [/COLOR] [COLOR=gray][COLOR=red]Motherboard:[/COLOR] DFI nF4 SLI-DR Expert [COLOR=red]Memory:[/COLOR] 2gb G.Skill F1-4000USU2-2 [COLOR=red]Video:[/COLOR] Asus 7900GT TOP @ 700/1700 [COLOR=red]Sound:[/COLOR] Modded X-Fi Elite Pro [COLOR=red]HD:[/COLOR] 2x Seagate 250Gb RAID 0, 1 Seagate 320Gb [COLOR=red]Optical Drives:[/COLOR] Sony DVD-Rom, Plextor 16x DVD DL RW [COLOR=red]Case:[/COLOR] CM Stacker [COLOR=red]PSU:[/COLOR] PC Power & Cooling Silencer 610 [COLOR=red]Cooling:[/COLOR] Custom Water [COLOR=yellow][COLOR=red]Keyboard/Mouse:[/COLOR] [/COLOR]Saitec Eclipse & Logitech MX518 with a Razer ExactMat mouse pad [COLOR=red]Sound:[/COLOR] Modded X-fi > Soloz Audio Silver IC > Maxed PIMETA > Beyer DT 770 Pro/80 cans [COLOR=red]HTPC:[/COLOR] [/COLOR][COLOR=gray]AMD 3800X2[/COLOR][COLOR=gray], Asus A8N-SLI Deluxe, G.Skill 2GB DDR400, MSI 6600GT, Haupauge PVR150, SB [/COLOR][COLOR=gray]Audigy 2ZS[/COLOR][COLOR=gray], Samsung 16x DVD DL RW, Sunbeam Nuuo PSU, Antec P180 case, AC Freezer64 Pro, Viewsonic N2750w LCD HDTV Heatware eBay [/COLOR]

Nov 10, 2005, 09:32 PM	#306
soloz2 DriverHeaven Addict Join Date: Mar 2005 Posts: 362 Rep Power: 0	hmm... no I think the guy I talked to on the phone when I called said bottom left corner, which is where I looked. I just dug out my RAM again and took a closer look. It appears that one stick doesn't have anything after the timings and the other has a very faint number. I can barely make out what appears to be a "v" and then there is a space where a number should be, but it looks like it finishes with an "0." so it looks kinda like this: "v '.0" I would assume that this means version 1.0. Since the other stick doesn't say anything is it safe to assume they are both version 1? OCZ wouldn't mix version 1 with version 1.1 would they? that would be two different chips. I sure hope these are the TCCD chips... __________________ [COLOR=gray][COLOR=red]CPU:[/COLOR] AMD Opteron 165 CCBBE @ 2.8Ghz [/COLOR] [COLOR=gray][COLOR=red]Motherboard:[/COLOR] DFI nF4 SLI-DR Expert [COLOR=red]Memory:[/COLOR] 2gb G.Skill F1-4000USU2-2 [COLOR=red]Video:[/COLOR] Asus 7900GT TOP @ 700/1700 [COLOR=red]Sound:[/COLOR] Modded X-Fi Elite Pro [COLOR=red]HD:[/COLOR] 2x Seagate 250Gb RAID 0, 1 Seagate 320Gb [COLOR=red]Optical Drives:[/COLOR] Sony DVD-Rom, Plextor 16x DVD DL RW [COLOR=red]Case:[/COLOR] CM Stacker [COLOR=red]PSU:[/COLOR] PC Power & Cooling Silencer 610 [COLOR=red]Cooling:[/COLOR] Custom Water [COLOR=yellow][COLOR=red]Keyboard/Mouse:[/COLOR] [/COLOR]Saitec Eclipse & Logitech MX518 with a Razer ExactMat mouse pad [COLOR=red]Sound:[/COLOR] Modded X-fi > Soloz Audio Silver IC > Maxed PIMETA > Beyer DT 770 Pro/80 cans [COLOR=red]HTPC:[/COLOR] [/COLOR][COLOR=gray]AMD 3800X2[/COLOR][COLOR=gray], Asus A8N-SLI Deluxe, G.Skill 2GB DDR400, MSI 6600GT, Haupauge PVR150, SB [/COLOR][COLOR=gray]Audigy 2ZS[/COLOR][COLOR=gray], Samsung 16x DVD DL RW, Sunbeam Nuuo PSU, Antec P180 case, AC Freezer64 Pro, Viewsonic N2750w LCD HDTV Heatware eBay [/COLOR]

Nov 10, 2005, 09:54 PM	#308
soloz2 DriverHeaven Addict Join Date: Mar 2005 Posts: 362 Rep Power: 0	alright, yeah I got the 3200. I'm hoping they'll be a lot better than my corsair 3200C2 __________________ [COLOR=gray][COLOR=red]CPU:[/COLOR] AMD Opteron 165 CCBBE @ 2.8Ghz [/COLOR] [COLOR=gray][COLOR=red]Motherboard:[/COLOR] DFI nF4 SLI-DR Expert [COLOR=red]Memory:[/COLOR] 2gb G.Skill F1-4000USU2-2 [COLOR=red]Video:[/COLOR] Asus 7900GT TOP @ 700/1700 [COLOR=red]Sound:[/COLOR] Modded X-Fi Elite Pro [COLOR=red]HD:[/COLOR] 2x Seagate 250Gb RAID 0, 1 Seagate 320Gb [COLOR=red]Optical Drives:[/COLOR] Sony DVD-Rom, Plextor 16x DVD DL RW [COLOR=red]Case:[/COLOR] CM Stacker [COLOR=red]PSU:[/COLOR] PC Power & Cooling Silencer 610 [COLOR=red]Cooling:[/COLOR] Custom Water [COLOR=yellow][COLOR=red]Keyboard/Mouse:[/COLOR] [/COLOR]Saitec Eclipse & Logitech MX518 with a Razer ExactMat mouse pad [COLOR=red]Sound:[/COLOR] Modded X-fi > Soloz Audio Silver IC > Maxed PIMETA > Beyer DT 770 Pro/80 cans [COLOR=red]HTPC:[/COLOR] [/COLOR][COLOR=gray]AMD 3800X2[/COLOR][COLOR=gray], Asus A8N-SLI Deluxe, G.Skill 2GB DDR400, MSI 6600GT, Haupauge PVR150, SB [/COLOR][COLOR=gray]Audigy 2ZS[/COLOR][COLOR=gray], Samsung 16x DVD DL RW, Sunbeam Nuuo PSU, Antec P180 case, AC Freezer64 Pro, Viewsonic N2750w LCD HDTV Heatware eBay [/COLOR]

Nov 10, 2005, 10:46 PM	#310
soloz2 DriverHeaven Addict Join Date: Mar 2005 Posts: 362 Rep Power: 0	Scargo~ yes you can run a dual boot. I ran both xp pro and x64 pro on my same drives... RAID appears to be one drive. just put them on different partitions. I am currently running 32bit windows because I couldn't get drivers I liked for my printer. I could get my printer to work via a workaround using drivers for a different printer but I lost all the added features of my HP photo printer. I couldn't choose the higher print qualities and couldn't access the card reader. Once there are drivers I'm hoping to switch over. __________________ [COLOR=gray][COLOR=red]CPU:[/COLOR] AMD Opteron 165 CCBBE @ 2.8Ghz [/COLOR] [COLOR=gray][COLOR=red]Motherboard:[/COLOR] DFI nF4 SLI-DR Expert [COLOR=red]Memory:[/COLOR] 2gb G.Skill F1-4000USU2-2 [COLOR=red]Video:[/COLOR] Asus 7900GT TOP @ 700/1700 [COLOR=red]Sound:[/COLOR] Modded X-Fi Elite Pro [COLOR=red]HD:[/COLOR] 2x Seagate 250Gb RAID 0, 1 Seagate 320Gb [COLOR=red]Optical Drives:[/COLOR] Sony DVD-Rom, Plextor 16x DVD DL RW [COLOR=red]Case:[/COLOR] CM Stacker [COLOR=red]PSU:[/COLOR] PC Power & Cooling Silencer 610 [COLOR=red]Cooling:[/COLOR] Custom Water [COLOR=yellow][COLOR=red]Keyboard/Mouse:[/COLOR] [/COLOR]Saitec Eclipse & Logitech MX518 with a Razer ExactMat mouse pad [COLOR=red]Sound:[/COLOR] Modded X-fi > Soloz Audio Silver IC > Maxed PIMETA > Beyer DT 770 Pro/80 cans [COLOR=red]HTPC:[/COLOR] [/COLOR][COLOR=gray]AMD 3800X2[/COLOR][COLOR=gray], Asus A8N-SLI Deluxe, G.Skill 2GB DDR400, MSI 6600GT, Haupauge PVR150, SB [/COLOR][COLOR=gray]Audigy 2ZS[/COLOR][COLOR=gray], Samsung 16x DVD DL RW, Sunbeam Nuuo PSU, Antec P180 case, AC Freezer64 Pro, Viewsonic N2750w LCD HDTV Heatware eBay [/COLOR]

Nov 10, 2005, 05:01 PM	Thread Starter #302
RyderOCZ OCZ Staff Join Date: Feb 2005 Location: Kalamazoo, MI Posts: 205 Rep Power: 0	Hi Scargo, I think you will like that PC3200 Platinum just fine...You aren't going to notice much of a difference in PS with the ram running faster....you will get your performance out of having all that ram. Are you going to install x64 windows? or Media Center? Those are the only 2 OS that will recognize and use all 4GB in windows. XP SP2 will only use 2.75-3.2 and that is all that will show up in Windows. 3GHz from an X2 is not very realistic...unless I have missed some threads where they are running them that high...These are workstations CPU's not badazz OC'ers....I think you will be very happy with the choice though given you are going to be a true multi-tasker...I have heard glowing reports of these things running about 6 apps at a time without a hiccup.

Nov 10, 2005, 09:02 PM	Thread Starter #305
RyderOCZ OCZ Staff Join Date: Feb 2005 Location: Kalamazoo, MI Posts: 205 Rep Power: 0	The version number would be in the lower right hand corner of the sticker...very tiny just after the 2-2-2-5 timings. Sorry if I had said left corner before.

Nov 10, 2005, 09:47 PM	Thread Starter #307
RyderOCZ OCZ Staff Join Date: Feb 2005 Location: Kalamazoo, MI Posts: 205 Rep Power: 0	TCCD and TCC5 are the same IC...they just carry a different designation from Samsung....OCZ still bins the chips accordingly for the 3 different speed parts that we run this IC on. PC3200 Rev 2, PC4200 Plat, and PC4800 Plat. I have a pair of Plat Rev 2 TCC5 sticks that run just fine at 290FSB at 2.5-3-3-7 timings. TCC5 or TCCD you have the same "chance" that the sticks will clock a lot higher than 200FSB. Not all TCC5 will and not all TCCD will But...lower right hand corner is where its at...and v1.0 is TCCD...no number at all should also be TCCD.

Nov 10, 2005, 10:29 PM	#309
Scargo DriverHeaven Lover Join Date: May 2005 Location: Connecticut Posts: 100 Rep Power: 0	I may not be able to do it but No_Style said: " Over at XS forums, one dude has his 4400+ Toledo (2 x 1 MB L2 Cache) core from 2.2 GHz to 3.0 GHz with Stock Cooling. Although, his voltage is at 1.7 V which I don't recommend using. I believe the 4400+ hit around 2.6 GHz with safe voltages." I don't think 3GHz sounds reasonable on stock air cooling.....On the other hand, Hot Hardware got 3.12GHz from an Athlon 64 FX-53 on an open bench/air setup with this board. The 8 cycle voltage provided on the board is supposed to keep the CPU cooler. I do have Windows Pro X64, but haven't loaded it yet. I have lots of questions to get answered before I do that. Like, can I run two platforms (XP Pro and X64 Pro) at the same time (or simultaneosly and partitioned on the same PC)? I'm thinking I will run X64 stripped down for just CS2, scanning and printing until 64 bit becomes more mainstream. I understand drivers are still an issue....

Nov 11, 2005, 05:11 AM	Thread Starter #313
RyderOCZ OCZ Staff Join Date: Feb 2005 Location: Kalamazoo, MI Posts: 205 Rep Power: 0	Just set 1T/2T to 1T...you should be in the Blue slots for the ram and everything looks good. CAS = 2 TRAS = 5 (if you want..shouldn't make any difference) Trcd = 2 Trp = 2 Trc = 11 Trfc = 14 Trtw or Trwt probably = 4 (3 here if it will boot that way) Twr = 3 1T/2T = 1T

Nov 11, 2005, 11:32 PM	Thread Starter #316
RyderOCZ OCZ Staff Join Date: Feb 2005 Location: Kalamazoo, MI Posts: 205 Rep Power: 0	I think you are doing pretty well...Trtw from 3 to 4 is not big deal...just a stability tweak

Nov 12, 2005, 05:13 PM	#319
Scargo DriverHeaven Lover Join Date: May 2005 Location: Connecticut Posts: 100 Rep Power: 0	I think what Tulcakelume meant to say was "The ram should have no problems running @ 2-2-2-5 @ 1T." That is, if you are only running two sticks of RAM. I assume you are...... If you have four sticks installed then you have to run 2T.

Nov 13, 2005, 02:51 PM	#322
Lowfat Xtreme Join Date: Oct 2003 Location: Grande Prairie, AB, Can Posts: 4,251 Rep Power: 99	have you ran memtest at all? sounds to me as if the ram isn't cutting it. My first set of Gold VX did the same thing, however new set runs flawlessly. __________________ 27" iMac: i5 750 * 80GB X25-M G1 * 4GB DDR3 * HD4850 Stacker: 2600k * P8P67 Pro * 4GB DDR3 * 80GB ioXtreme * 30GB X25-E * (2) HD6950 * Asus D2 * Enermax Revo85+ HWD: (2) Xeon E5649 * EVGA SR-2 * 6GB DDR3 * 8800GTS * 1000W Antec FT01BW: (2) Xeon E5645 * EVGA SR-2 * 6GB DDR3 * GTS210 * Gigabyte 800W Odin GT Storage: (2) Sans Digital TR8M-B * 29TB

Nov 13, 2005, 10:12 PM	Thread Starter #323
RyderOCZ OCZ Staff Join Date: Feb 2005 Location: Kalamazoo, MI Posts: 205 Rep Power: 0	Its the board Judas, Is this your first 2GB kit of ram or did you have 2GB before? Also the ram is not rated for 2-2-2-5 operation its 2-3-2-5...were you running 2-2-2?

Nov 14, 2005, 05:53 PM	Thread Starter #325
RyderOCZ OCZ Staff Join Date: Feb 2005 Location: Kalamazoo, MI Posts: 205 Rep Power: 0	Oy, I guess I am all confused then Yes these should run 2-2-2 at 1T...although this series of Asus board is "famous" for 1T/2T issues at anything over 200FSB. Are things 100% ok at 1T and 200?

Nov 18, 2005, 12:16 AM	#328
soloz2 DriverHeaven Addict Join Date: Mar 2005 Posts: 362 Rep Power: 0	have you run memtest? That should let you know if the problems are caused by the RAM or not... yeah, I can't get my Asus board to run 1T at anything over 240... from what I've read though in real life performance is only about 1-3% less running at 2T and an increase in bandwith will more than make up for the loss of running at 2T. __________________ [COLOR=gray][COLOR=red]CPU:[/COLOR] AMD Opteron 165 CCBBE @ 2.8Ghz [/COLOR] [COLOR=gray][COLOR=red]Motherboard:[/COLOR] DFI nF4 SLI-DR Expert [COLOR=red]Memory:[/COLOR] 2gb G.Skill F1-4000USU2-2 [COLOR=red]Video:[/COLOR] Asus 7900GT TOP @ 700/1700 [COLOR=red]Sound:[/COLOR] Modded X-Fi Elite Pro [COLOR=red]HD:[/COLOR] 2x Seagate 250Gb RAID 0, 1 Seagate 320Gb [COLOR=red]Optical Drives:[/COLOR] Sony DVD-Rom, Plextor 16x DVD DL RW [COLOR=red]Case:[/COLOR] CM Stacker [COLOR=red]PSU:[/COLOR] PC Power & Cooling Silencer 610 [COLOR=red]Cooling:[/COLOR] Custom Water [COLOR=yellow][COLOR=red]Keyboard/Mouse:[/COLOR] [/COLOR]Saitec Eclipse & Logitech MX518 with a Razer ExactMat mouse pad [COLOR=red]Sound:[/COLOR] Modded X-fi > Soloz Audio Silver IC > Maxed PIMETA > Beyer DT 770 Pro/80 cans [COLOR=red]HTPC:[/COLOR] [/COLOR][COLOR=gray]AMD 3800X2[/COLOR][COLOR=gray], Asus A8N-SLI Deluxe, G.Skill 2GB DDR400, MSI 6600GT, Haupauge PVR150, SB [/COLOR][COLOR=gray]Audigy 2ZS[/COLOR][COLOR=gray], Samsung 16x DVD DL RW, Sunbeam Nuuo PSU, Antec P180 case, AC Freezer64 Pro, Viewsonic N2750w LCD HDTV Heatware eBay [/COLOR]

Nov 18, 2005, 05:24 AM	Thread Starter #330
RyderOCZ OCZ Staff Join Date: Feb 2005 Location: Kalamazoo, MI Posts: 205 Rep Power: 0	Judas, Are you maxed out on Voltage? 2.85V for these?