axia overclocking

edwards82 · Dec 28, 2002, 03:33 PM

hi all , i have a 1 ghz ( 10 x 100 f.s.b) athlon axia chip running at 1.40 ghz (10 x 140 f.s.b) and was wondering if it would be a good idea to push it to 1.50 ghz (10 x 150 f.s.b) or is that to high for these chips ? any info would be of help. temps are 46c idle and 49c under load. thanx in advanced.

dipstick · Dec 28, 2002, 03:48 PM

As long as the load temps stay under 55C, I don't see why not. Heat is what will kill the cpu. So if as long as you keep it cool, OC that sucka as far as it will go

edwards82 · Dec 28, 2002, 04:13 PM

thanxs i will have a go and see how far i can push it

edwards82 · Dec 28, 2002, 04:22 PM

also one more question my 3dmark2001se score is about 6600-6700 is this about right for my rig. specs are athlon axia @1.4 ghz , 256 mb pc2100 and geforce 3 ti 200 @ 200/440

dipstick · Dec 28, 2002, 04:29 PM

Sounds about right and is pretty good actually. On my P4 1.6, 512mb PC2100 and GF3@200/480 I get about the same-6700 points.

edwards82 · Dec 28, 2002, 10:45 PM

ran at 1440 mhz (10 x 144 f.s.b) without problem. did 3d mark 2k1se from cold start ran through all tests got 6746 c.p.u hit 51c. dont want to push any further as i dont want to kill it. will take cover off tomorrow to help cooling and will try 150 f.s.b.

not bad though 44 % overclock with standard cooling and voltage.

Dec 28, 2002, 03:33 PM	#1
edwards82 HardwareHeaven Junior Member Join Date: Dec 2002 Location: norfolk , u.k Posts: 24 Rep Power: 0	axia overclocking hi all , i have a 1 ghz ( 10 x 100 f.s.b) athlon axia chip running at 1.40 ghz (10 x 140 f.s.b) and was wondering if it would be a good idea to push it to 1.50 ghz (10 x 150 f.s.b) or is that to high for these chips ? any info would be of help. temps are 46c idle and 49c under load. thanx in advanced.

Dec 28, 2002, 10:45 PM	Thread Starter #6
edwards82 HardwareHeaven Junior Member Join Date: Dec 2002 Location: norfolk , u.k Posts: 24 Rep Power: 0	update ran at 1440 mhz (10 x 144 f.s.b) without problem. did 3d mark 2k1se from cold start ran through all tests got 6746 c.p.u hit 51c. dont want to push any further as i dont want to kill it. will take cover off tomorrow to help cooling and will try 150 f.s.b. not bad though 44 % overclock with standard cooling and voltage.

Dec 28, 2002, 03:48 PM	#2
dipstick HardwareHeaven Extreme Member Join Date: May 2002 Location: USA Posts: 3,609 Rep Power: 71 System Specs	As long as the load temps stay under 55C, I don't see why not. Heat is what will kill the cpu. So if as long as you keep it cool, OC that sucka as far as it will go

Dec 28, 2002, 04:13 PM	Thread Starter #3
edwards82 HardwareHeaven Junior Member Join Date: Dec 2002 Location: norfolk , u.k Posts: 24 Rep Power: 0	thanxs i will have a go and see how far i can push it

Dec 28, 2002, 04:22 PM	Thread Starter #4
edwards82 HardwareHeaven Junior Member Join Date: Dec 2002 Location: norfolk , u.k Posts: 24 Rep Power: 0	also one more question my 3dmark2001se score is about 6600-6700 is this about right for my rig. specs are athlon axia @1.4 ghz , 256 mb pc2100 and geforce 3 ti 200 @ 200/440

Dec 28, 2002, 04:29 PM	#5
dipstick HardwareHeaven Extreme Member Join Date: May 2002 Location: USA Posts: 3,609 Rep Power: 71 System Specs	Sounds about right and is pretty good actually. On my P4 1.6, 512mb PC2100 and GF3@200/480 I get about the same-6700 points.