XP2100 with a 1000mhz overclock? YES it is TRUE!

DriveEuro · Jan 22, 2003, 06:25 AM

Check this stuff out. This is AMAZING! Looks like the XP2100 AIUHB stepping is the new golden CPU...

http://www.xtremesystems.org/forums/...&threadid=8453

ToshiroOC · Jan 22, 2003, 06:30 AM

Thats truly amazing... and once I see a store that guarantees that they are shipping this new stepping, I am there! Damn... I have some of the best air cooling you can get... so I'm hoping for maybe 800mhz more than what I'm currently running, 1.6ghz...

DriveEuro · Jan 22, 2003, 06:41 AM

Man, I could go for that I sell this 2000 in a flash. Although this guy is running Promethia cooling.

ToshiroOC · Jan 22, 2003, 06:43 AM

Oh, ya, I just noticed that the other guy got to 2.4ghz with a Prometia too - my hopes have been dashed

I think I'm going to wait and see if aircooling people have a good shot at getting those insane overclocks - my current AGKGA K gets to 1764 at most... but someone with compressor-cooled slushee-style antifreeze liquid cooling got my same stepping up to 2 ghz...

DriveEuro · Jan 22, 2003, 06:49 AM

HA! I'm still just trying to slowly get to a 200mhz bus. Then overclocking I go. It's an aquired art. You can't rush it.

shuki · Jan 22, 2003, 08:47 AM

ha! that's the exact chip coming my way

ain't no burn in time for it... straight up there baby

snagged it from newegg a week ago for $92 shipped

I'll keep ya'll updated on the progress once she arrives. Though there have been reports of problems with these and kx7-333 rev 1.0 mobos which I have. Still gonna see what I can get before I RMA this mobo for rev 1.1 tbred support...

Talicni_Tom · Jan 22, 2003, 03:02 PM

"the Highest I tried with 3dmark2001 so far was 2750, which it did pass, but only registerd as AGP 1X and I can't figure out why yet..."

this is rather useless overclock
he cant run 3dmark,he`s barely stable to run sandra,no prime screenshots

DriveEuro · Jan 22, 2003, 03:28 PM

Dude. We're talking about AMD....not intel. Almost anyone can get a 1000mhz overclock on a P4.

Talicni_Tom · Jan 22, 2003, 04:56 PM

Dude.You dont know nothing about p4...

you missed the point,it would be interesting to see how high can it go but remain fully stable(eg can run 3d mark,prime etc)

DriveEuro · Jan 22, 2003, 05:28 PM

Ok.....but the newer AMD's usually just do 200 - 400 mhz overclock the most. Intel's can go 1000 (anything norwood)..... That's my point. Your overclock isn't much for you. That AMD overclock is AMAZING.

Jan 22, 2003, 05:36 PM

Now this better not get nasty guys or i will have to close it.

This is not a debate about Intel vs Amd.(go to the Flamming zone for that)

Its only an article about a man that took a 90 $ cpu and took it to its limit....so please treat that way.

Extreme overclocking isnt only about getting a high stable speed but actually finding a CPUs limit and getting it to run long enough to be able to record its speed.

shuki · Jan 22, 2003, 06:00 PM

Quote:

Originally posted by Talicni_Tom
Dude.You dont know nothing about p4...

you missed the point,it would be interesting to see how high can it go but remain fully stable(eg can run 3d mark,prime etc)

some people prefer to overclock for benches. I, on the other hand, will not post up "benches" at speeds that I can not run all my apps at and be fully stable. I agree with you tom. But to each their own....

Talicni_Tom · Jan 22, 2003, 07:23 PM

Quote:

Originally posted by DriveEuro
Ok.....but the newer AMD's usually just do 200 - 400 mhz overclock the most. Intel's can go 1000 (anything norwood)..... That's my point. Your overclock isn't much for you. That AMD overclock is AMAZING.

I`ve just expressed my opinion.My intention was not to flame.

I had the amd rigs before and still own one.In every forum i`ve seen similar behavior.I usually put p4`s in my sig and if i comment on amd there is always a noob who think that i`m not entitled to post about amd.

If I put all my computers in sig,it`ll be longer that dig`s sig.

reno · Jan 25, 2003, 11:14 PM

Sort of on topic, I ghetto modded my Duron's heatsink with an 80mm fan that I could only screw one screw into and propped it off center to the heatsink (his other fan's bearings fused together...that POS pot metal box I have it in helps to create super-temperatures...anyway, was usually getting around 43-45 degrees idle, 54-59 degrees load/gaming...now with that thing...I get temps like my P4 (which I replaced the heatsink on, because I hadn't bought any comp parts in a while...hehe) about 31-33 idle, 46-48 load...little hotter than my Willy, but still REALLY good for a 750 duron locked, but at 133 FSB...

Maybe that would work for ya? Putting that fan off center blows MASSIVE air into the vital parts of that sink. Ghetto mods rock (like shit I'm spending 10 bucks on a shipped HSF for my duron!)

Jan 22, 2003, 06:25 AM	#1
DriveEuro HardwareHeaven Extreme Member Join Date: Jul 2002 Location: Gurnee Illinois Posts: 4,677 Rep Power: 0	XP2100 with a 1000mhz overclock? YES it is TRUE! Check this stuff out. This is AMAZING! Looks like the XP2100 AIUHB stepping is the new golden CPU... http://www.xtremesystems.org/forums/...&threadid=8453 __________________ [color=orange]ASUS P4P800 Deluxe [color=black]-[/color] 2.4C --> 3300mhz [color=black]-[/color] Mushkin PC3200 at 220 5-2-2-2 (cpu limited) [color=black]-[/color] BBAti 9800Pro at 430/375 [/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]01[/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]03[/color] 16001200 12801024

Jan 22, 2003, 06:30 AM	#2
ToshiroOC Unbiased. Join Date: Jun 2002 Posts: 4,812 Rep Power: 0	Thats truly amazing... and once I see a store that guarantees that they are shipping this new stepping, I am there! Damn... I have some of the best air cooling you can get... so I'm hoping for maybe 800mhz more than what I'm currently running, 1.6ghz... __________________ [img][/img] [color=White]Peace be with you, Joe.[/color] Driverheaven Staff Member (Supermoderator)

Jan 22, 2003, 06:41 AM	Thread Starter #3
DriveEuro HardwareHeaven Extreme Member Join Date: Jul 2002 Location: Gurnee Illinois Posts: 4,677 Rep Power: 0	Man, I could go for that I sell this 2000 in a flash. Although this guy is running Promethia cooling. __________________ [color=orange]ASUS P4P800 Deluxe [color=black]-[/color] 2.4C --> 3300mhz [color=black]-[/color] Mushkin PC3200 at 220 5-2-2-2 (cpu limited) [color=black]-[/color] BBAti 9800Pro at 430/375 [/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]01[/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]03[/color] 16001200 12801024

Jan 22, 2003, 06:43 AM	#4
ToshiroOC Unbiased. Join Date: Jun 2002 Posts: 4,812 Rep Power: 0	Oh, ya, I just noticed that the other guy got to 2.4ghz with a Prometia too - my hopes have been dashed I think I'm going to wait and see if aircooling people have a good shot at getting those insane overclocks - my current AGKGA K gets to 1764 at most... but someone with compressor-cooled slushee-style antifreeze liquid cooling got my same stepping up to 2 ghz... __________________ [img][/img] [color=White]Peace be with you, Joe.[/color] Driverheaven Staff Member (Supermoderator)

Jan 22, 2003, 06:49 AM	Thread Starter #5
DriveEuro HardwareHeaven Extreme Member Join Date: Jul 2002 Location: Gurnee Illinois Posts: 4,677 Rep Power: 0	HA! I'm still just trying to slowly get to a 200mhz bus. Then overclocking I go. It's an aquired art. You can't rush it. __________________ [color=orange]ASUS P4P800 Deluxe [color=black]-[/color] 2.4C --> 3300mhz [color=black]-[/color] Mushkin PC3200 at 220 5-2-2-2 (cpu limited) [color=black]-[/color] BBAti 9800Pro at 430/375 [/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]01[/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]03[/color] 16001200 12801024

Jan 22, 2003, 08:47 AM	#6
shuki DriverHeaven Senior Member Join Date: May 2002 Location: in the hidden place Posts: 1,975 Rep Power: 0	ha! that's the exact chip coming my way ain't no burn in time for it... straight up there baby snagged it from newegg a week ago for $92 shipped I'll keep ya'll updated on the progress once she arrives. Though there have been reports of problems with these and kx7-333 rev 1.0 mobos which I have. Still gonna see what I can get before I RMA this mobo for rev 1.1 tbred support...

Jan 22, 2003, 03:02 PM	#7
Talicni_Tom DriverHeaven Junior Member Join Date: Sep 2002 Posts: 41 Rep Power: 0	"the Highest I tried with 3dmark2001 so far was 2750, which it did pass, but only registerd as AGP 1X and I can't figure out why yet..." this is rather useless overclock he cant run 3dmark,he`s barely stable to run sandra,no prime screenshots __________________ p4 2.4b abit be7 768MB ati radeon 8500 128MB Last edited by Talicni_Tom; Jan 22, 2003 at 05:16 PM.

Jan 22, 2003, 03:28 PM	Thread Starter #8
DriveEuro HardwareHeaven Extreme Member Join Date: Jul 2002 Location: Gurnee Illinois Posts: 4,677 Rep Power: 0	Dude. We're talking about AMD....not intel. Almost anyone can get a 1000mhz overclock on a P4. __________________ [color=orange]ASUS P4P800 Deluxe [color=black]-[/color] 2.4C --> 3300mhz [color=black]-[/color] Mushkin PC3200 at 220 5-2-2-2 (cpu limited) [color=black]-[/color] BBAti 9800Pro at 430/375 [/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]01[/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]03[/color] 16001200 12801024

Jan 22, 2003, 04:56 PM	#9
Talicni_Tom DriverHeaven Junior Member Join Date: Sep 2002 Posts: 41 Rep Power: 0	Dude.You dont know nothing about p4... you missed the point,it would be interesting to see how high can it go but remain fully stable(eg can run 3d mark,prime etc) __________________ p4 2.4b abit be7 768MB ati radeon 8500 128MB

Jan 22, 2003, 05:28 PM	Thread Starter #10
DriveEuro HardwareHeaven Extreme Member Join Date: Jul 2002 Location: Gurnee Illinois Posts: 4,677 Rep Power: 0	Ok.....but the newer AMD's usually just do 200 - 400 mhz overclock the most. Intel's can go 1000 (anything norwood)..... That's my point. Your overclock isn't much for you. That AMD overclock is AMAZING. __________________ [color=orange]ASUS P4P800 Deluxe [color=black]-[/color] 2.4C --> 3300mhz [color=black]-[/color] Mushkin PC3200 at 220 5-2-2-2 (cpu limited) [color=black]-[/color] BBAti 9800Pro at 430/375 [/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]01[/color] [color=black]3[/color][color=gray]D[/color]M[color=black]a[/color][color=gray]r[/color]k[color=yellow]03[/color] 16001200 12801024 Last edited by DriveEuro; Jan 22, 2003 at 05:33 PM.

Jan 22, 2003, 05:36 PM	#11
GREEKRAGE Guest Posts: n/a	Now this better not get nasty guys or i will have to close it. This is not a debate about Intel vs Amd.(go to the Flamming zone for that) Its only an article about a man that took a 90 $ cpu and took it to its limit....so please treat that way. Extreme overclocking isnt only about getting a high stable speed but actually finding a CPUs limit and getting it to run long enough to be able to record its speed.

Jan 25, 2003, 11:14 PM	#14
reno Painlord of Ichor Join Date: May 2002 Location: bloinkin! Posts: 1,610 Rep Power: 0	fbdf Sort of on topic, I ghetto modded my Duron's heatsink with an 80mm fan that I could only screw one screw into and propped it off center to the heatsink (his other fan's bearings fused together...that POS pot metal box I have it in helps to create super-temperatures...anyway, was usually getting around 43-45 degrees idle, 54-59 degrees load/gaming...now with that thing...I get temps like my P4 (which I replaced the heatsink on, because I hadn't bought any comp parts in a while...hehe) about 31-33 idle, 46-48 load...little hotter than my Willy, but still REALLY good for a 750 duron locked, but at 133 FSB... Maybe that would work for ya? Putting that fan off center blows MASSIVE air into the vital parts of that sink. Ghetto mods rock (like shit I'm spending 10 bucks on a shipped HSF for my duron!)