please help me out... please.... windows 7 audigy value please help me ....

tamzid · May 16, 2009, 08:23 AM

i have a creative audigy value sound card and i have recently installed windows 7 rc x64bit... and now my sound card doesn't work... well only my front speakers work in my 5.1 speakers and they don't even play loud music right... i am desperately trying drivers but can't seem to find the right one... please help me out....

Mac Daddy · May 16, 2009, 12:25 PM

I think Robert is still working on the Win7 drivers but he may have an idea. There is a lot of info both in here and also on the KX section as well for audio cards.

Hope you get it sorted

Robert McClelland · May 16, 2009, 06:03 PM

Hi there did you check to see if there windows 7 drivers at creative site there might be under sound blaster audigy series 1.00 something like that I haven't touch that set yet. tune it up. If not you might be force get xfi card or audigy card

vaule kinda sucks mate.

tamzid · May 16, 2009, 08:36 PM

Quote:

Originally Posted by Robert McClelland

Hi there did you check to see if there windows 7 drivers at creative site there might be under sound blaster audigy series 1.00 something like that I haven't touch that set yet. tune it up. If not you might be force get xfi card or audigy card

vaule kinda sucks mate.

creative site is very much confusing and i couldn't find any drivers for my audigy value and win 7.... i know value sucks but i don't have the money to buy a better card .... actually i bought this card over my old sblive just because it didn't work under vista... i just need a soundcard to record some demo's for my band... sblive was doing great with it but it lacked support in vista... ofcourse audigy value gave me pretty good sound over my built in realtek other than just recording demo's... and i don't have any money to upgrade my sound card.... if i did i would rather go for an asus one.. i had it with creative they are just full of bullshit..

Robert McClelland · May 16, 2009, 09:36 PM

If you have link that work for your card I can tune it up for ya

tamzid · May 17, 2009, 02:26 AM

here is the link .... its not a great driver to be honest but it was stable.... the link

RapidShare: Easy Filehosting

from the forum Audigy SE to X-Fi Xtreme Audio - Page 4 - techPowerUp! Forums

p.s. could you do me a little favour... if you have the time for tuning it up for me could you please upload the new driver files in "mediafire" rapidshare doesn't allow me to download here.. i guess this will help out so many poor people who are struggling for a good driver for their audigy...

Robert McClelland · May 17, 2009, 04:48 AM

Sure np I be working on Monday if you don't mind? Weekends my off time working on the drivers

looking4you · May 17, 2009, 05:21 AM

Quote:

Originally Posted by tamzid

here is the link .... its not a great driver to be honest but it was stable.... the link

RapidShare: Easy Filehosting

from the forum Audigy SE to X-Fi Xtreme Audio - Page 4 - techPowerUp! Forums

p.s. could you do me a little favour... if you have the time for tuning it up for me could you please upload the new driver files in "mediafire" rapidshare doesn't allow me to download here.. i guess this will help out so many poor people who are struggling for a good driver for their audigy...

If you haven't noticed, those driver mods are from Daniel_K.

I don't think is nice to make a mod of a mod, so I'll help you with a direct link to Creative latest beta driver:

http://ccftp.creative.com/manualdn/D..._1_04_0079.exe

Nothing better than doing the right way, isn't Rob?

Robert McClelland · May 17, 2009, 05:43 AM

Yup

I allready got a mod for that heh you forget look at page two http://www.hardwareheaven.com/youp-pax...7-v1-00-a.html Maybe I should sticky drivers?

Tyrsonswood · May 17, 2009, 01:05 PM

Probably would be a good idea to sticky the driver sets Robert..............

tamzid · May 18, 2009, 07:53 PM

still waiting for the modified drivers

.. and ^^ +1 to the sticky thingy..

Robert McClelland · May 18, 2009, 08:56 PM

Quote:

Originally Posted by tamzid

still waiting for the modified drivers

.. and ^^ +1 to the sticky thingy..

Ya I'm waiting for creative too ok I guess I sticky the driver sets then

Hmm I'm going have ask staff at DH give me power to sticky thread

tamzid · May 18, 2009, 10:51 PM

Quote:

Originally Posted by Robert McClelland

Ya I'm waiting for creative too ok I guess I sticky the driver sets then

Hmm I'm going have ask staff at DH give me power to sticky thread

i thought u are going to tune the drivers for me so that i can use them in windows 7???? i mean didn't you want the link for the drivers that worked for me in vista x64 ???

Robert McClelland · May 18, 2009, 11:05 PM

that set does work with your card on win 7 I think let me know.

tamzid · May 19, 2009, 05:58 AM

Quote:

Originally Posted by Robert McClelland

that set does work with your card on win 7 I think let me know.

no it doesn't ... i mean i can install it.. but only my front panel would work... my rear center and subwoofer doesn't ... and creative console doesn't work either....

tamzid · May 21, 2009, 03:58 PM

hey robert still waiting for your modified drivers ....

Robert McClelland · May 21, 2009, 05:52 PM

Your card not non24bit correct? It might be while I have get ready for prep for conal check tomorrow afternoon weee funnn. I get the set ready on Sat. Please upload the drivers that work for ya I tune it up.

tamzid · May 21, 2009, 08:33 PM

Quote:

Originally Posted by tamzid

here is the link .... its not a great driver to be honest but it was stable.... the link

RapidShare: Easy Filehosting

from the forum Audigy SE to X-Fi Xtreme Audio - Page 4 - techPowerUp! Forums

p.s. could you do me a little favour... if you have the time for tuning it up for me could you please upload the new driver files in "mediafire" rapidshare doesn't allow me to download here.. i guess this will help out so many poor people who are struggling for a good driver for their audigy...

this is the link

Robert McClelland · May 21, 2009, 09:13 PM

Hmm I can't do another person driver it's worng bud. You sure the win 7 audigy vaule work on your card by defult? That driver I gave you it's base on Defult one.

tamzid · May 27, 2009, 06:04 AM

Quote:

Originally Posted by Robert McClelland

Yup

I allready got a mod for that heh you forget look at page two http://www.hardwareheaven.com/youp-pax...7-v1-00-a.html Maybe I should sticky drivers?

this driver has worked for me ... well not totally ... it seems like my front and rear speakers and my center speaker is working .... but i can't get any output on my subwoofer jack.... i have tried swapping jacks and everything... so what do i have to do now?? i have speakers setting on 5.1 on both of my audigy and realtek...

Robert McClelland · May 27, 2009, 06:29 AM

Maybe you need disable your realtek onboard then might be messing up your audigy card remeber those are beta drivers from creative I just tweak get more bass out of them hehe. Did you used driver cleaner?
my steps
1. uninstalled from Device Manger
2. reboot
3. run cleaner
4. reboot
5. installed the driver.
6. reboot.
7. installed audigy 4 pro software without the driver
8. reboot.
9. if you have software installed skip 7.
10. Enjoy
Those my steps

tamzid · May 27, 2009, 07:45 AM

okay i would uninstall all of realtek driver along with audigy drivers... and i use driver sweeper... btw windows update installs a driver via win update do i have to delete that as well as the drivers??? and i have a audigy value 24bit sound card but do i have to install audigy 4 pro software ????? if i do i don't have it could you please give me the link to it?? thanks i guess my worries are going to end soon

Robert McClelland · May 27, 2009, 03:28 PM

Check the sticky Mate

there. Yes always delete old driver sets thats where u get into trouble and uninstalled old software too.

tamzid · May 28, 2009, 12:59 PM

downloaded this huge file from http://www.hardwareheaven.com/youp-pax...on-2009-a.html but it didn't work .... i did everything with driver sweeper and everything but no luck... back to http://www.hardwareheaven.com/youp-pax...7-v1-00-a.html for me and without subwoofer output....

Robert McClelland · May 28, 2009, 09:21 PM

Ya email creative support team I'm sure they help you out. Remember it's beta driver.

Shadow Lady · Jun 1, 2009, 06:20 AM

maybe the new drivers will help out

http://files2.europe.creative.com/ma..._1_04_0090.exe

May 16, 2009, 08:23 AM	#1
tamzid DriverHeaven Newbie Join Date: May 2009 Posts: 12 Rep Power: 0	please help me out... please.... windows 7 audigy value please help me .... i have a creative audigy value sound card and i have recently installed windows 7 rc x64bit... and now my sound card doesn't work... well only my front speakers work in my 5.1 speakers and they don't even play loud music right... i am desperately trying drivers but can't seem to find the right one... please help me out....

May 16, 2009, 12:25 PM	#2
Mac Daddy DriverHeaven Extreme Member Join Date: Jul 2002 Location: Ontario, Canada Posts: 7,950 Rep Power: 80 System Specs	Re: please help me out... please.... windows 7 audigy value please help me .... I think Robert is still working on the Win7 drivers but he may have an idea. There is a lot of info both in here and also on the KX section as well for audio cards. Hope you get it sorted __________________ "My mom said the only reason men are alive is for lawn care and vehicle maintenance." - Tim Allen

May 16, 2009, 06:03 PM	#3
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: please help me out... please.... windows 7 audigy value please help me .... Hi there did you check to see if there windows 7 drivers at creative site there might be under sound blaster audigy series 1.00 something like that I haven't touch that set yet. tune it up. If not you might be force get xfi card or audigy card vaule kinda sucks mate. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

May 16, 2009, 09:36 PM	#5
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: please help me out... please.... windows 7 audigy value please help me .... If you have link that work for your card I can tune it up for ya __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

May 17, 2009, 02:26 AM	Thread Starter #6
tamzid DriverHeaven Newbie Join Date: May 2009 Posts: 12 Rep Power: 0	Re: please help me out... please.... windows 7 audigy value please help me .... here is the link .... its not a great driver to be honest but it was stable.... the link RapidShare: Easy Filehosting from the forum Audigy SE to X-Fi Xtreme Audio - Page 4 - techPowerUp! Forums p.s. could you do me a little favour... if you have the time for tuning it up for me could you please upload the new driver files in "mediafire" rapidshare doesn't allow me to download here.. i guess this will help out so many poor people who are struggling for a good driver for their audigy... Last edited by tamzid; May 17, 2009 at 02:49 AM.

May 17, 2009, 04:48 AM	#7
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: please help me out... please.... windows 7 audigy value please help me .... Sure np I be working on Monday if you don't mind? Weekends my off time working on the drivers __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

May 17, 2009, 05:43 AM	#9
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: please help me out... please.... windows 7 audigy value please help me .... Yup I allready got a mod for that heh you forget look at page two http://www.hardwareheaven.com/youp-pax...7-v1-00-a.html Maybe I should sticky drivers? __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

May 18, 2009, 07:53 PM	Thread Starter #11
tamzid DriverHeaven Newbie Join Date: May 2009 Posts: 12 Rep Power: 0	Re: please help me out... please.... windows 7 audigy value please help me .... still waiting for the modified drivers .. and ^^ +1 to the sticky thingy..

May 18, 2009, 11:05 PM	#14
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: please help me out... please.... windows 7 audigy value please help me .... that set does work with your card on win 7 I think let me know. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

May 21, 2009, 03:58 PM	Thread Starter #16
tamzid DriverHeaven Newbie Join Date: May 2009 Posts: 12 Rep Power: 0	Re: please help me out... please.... windows 7 audigy value please help me .... hey robert still waiting for your modified drivers ....

May 21, 2009, 05:52 PM	#17
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: please help me out... please.... windows 7 audigy value please help me .... Your card not non24bit correct? It might be while I have get ready for prep for conal check tomorrow afternoon weee funnn. I get the set ready on Sat. Please upload the drivers that work for ya I tune it up. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now Last edited by Robert McClelland; May 21, 2009 at 08:05 PM.

May 21, 2009, 09:13 PM	#19
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: please help me out... please.... windows 7 audigy value please help me .... Hmm I can't do another person driver it's worng bud. You sure the win 7 audigy vaule work on your card by defult? That driver I gave you it's base on Defult one. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

May 27, 2009, 06:29 AM	#21
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: please help me out... please.... windows 7 audigy value please help me .... Maybe you need disable your realtek onboard then might be messing up your audigy card remeber those are beta drivers from creative I just tweak get more bass out of them hehe. Did you used driver cleaner? my steps 1. uninstalled from Device Manger 2. reboot 3. run cleaner 4. reboot 5. installed the driver. 6. reboot. 7. installed audigy 4 pro software without the driver 8. reboot. 9. if you have software installed skip 7. 10. Enjoy Those my steps __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

May 27, 2009, 07:45 AM	Thread Starter #22
tamzid DriverHeaven Newbie Join Date: May 2009 Posts: 12 Rep Power: 0	Re: please help me out... please.... windows 7 audigy value please help me .... okay i would uninstall all of realtek driver along with audigy drivers... and i use driver sweeper... btw windows update installs a driver via win update do i have to delete that as well as the drivers??? and i have a audigy value 24bit sound card but do i have to install audigy 4 pro software ????? if i do i don't have it could you please give me the link to it?? thanks i guess my worries are going to end soon

May 27, 2009, 03:28 PM	#23
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: please help me out... please.... windows 7 audigy value please help me .... Check the sticky Mate there. Yes always delete old driver sets thats where u get into trouble and uninstalled old software too. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

May 28, 2009, 12:59 PM	Thread Starter #24
tamzid DriverHeaven Newbie Join Date: May 2009 Posts: 12 Rep Power: 0	Re: please help me out... please.... windows 7 audigy value please help me .... downloaded this huge file from http://www.hardwareheaven.com/youp-pax...on-2009-a.html but it didn't work .... i did everything with driver sweeper and everything but no luck... back to http://www.hardwareheaven.com/youp-pax...7-v1-00-a.html for me and without subwoofer output....

May 28, 2009, 09:21 PM	#25
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: please help me out... please.... windows 7 audigy value please help me .... Ya email creative support team I'm sure they help you out. Remember it's beta driver. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

Jun 1, 2009, 06:20 AM	#26
Shadow Lady Avril Fan Join Date: Jun 2003 Location: somewhere in colombia, okok, bogotá city :p Posts: 1,262 Rep Power: 0	Re: please help me out... please.... windows 7 audigy value please help me .... maybe the new drivers will help out http://files2.europe.creative.com/ma..._1_04_0090.exe __________________ Oblivion ftw Last edited by Shadow Lady; Jun 1, 2009 at 07:11 AM.