New Pax Driver and Suite Discus Thread

Killer344 · Oct 14, 2010, 11:24 PM

I'm back at home, just msg me on msn when you can.

f1n3 · Oct 15, 2010, 11:35 PM

Hey Robert,

I installed the newest (Downloaded everything an hour ago) PAX PCIe Titanium ALL OS Driver V3.10 and PAX MASTER Suite V1.00. I installed both by using the "setup.exe".

It installed just fine and I can see the soundcard at my "Device Manager". But I can't hear anything.

When I try to open the "Console Starter" I get this error:

When I press "yes" I get this:

Is it because you haven't got my IDs yet or is it another problem?

And when I install the "Suite", can I "cancel" the ones I don't want to be installed and it just goes on with the next one?

- f1n3

Killer344 · Oct 16, 2010, 02:21 AM

Hey rob, this THX console I found on the Auzentech's forum works fine:

http://rs335.rapidshare.com/files/35...le_3_50_05.exe

Robert McClelland · Oct 16, 2010, 02:43 AM

Yup it was made by Dan K Compiled on 02/27/2009 by Daniel Kawakami Can't used sorry.

icewill · Oct 16, 2010, 04:42 PM

Hi Robert, thanks for your amazing drivers and packs. Unfortunately I encountered the same problem as Killer did. I'm unable to install the THXConU, SmartRec, and one more I cant remember. Is there a way to fix it? I'm anxious to use this new pack of yours

Cheers

PS. I don't know whether it is because the errors I had, after installing the driver, the setup terminated itself without asking to reboot. After I reboot my computer, unlike the Auzentech driver pack, all of the software I just installed didn't go into the uninstall menu (the menu you find in the control panel that lets you uninstall stuff). Therefore not only I can't uninstall the whole back at the sametime, also I can't even uninstall any of them.

icewill · Oct 16, 2010, 05:40 PM

In order to uninstall the software I reinstalled the PAX master suit v1.00 over it, and then I can uninstall them thru control panel. Also, the THX console from master suit won't work with the Auzentech prelude official driver and the newest prelude driver you put out. The only driver that the THX console work with was the Daniel_k's XFI SupportPack 2.0, however, with that driver my mic won't work. So I'm now using only the driver from your Prelude pack, plus the master suit v1.00 with some of the feature unusable like the THX console.

Just to let you know my situation. I'm very thankful of your work. Please take your time to work on it.

Robert McClelland · Oct 16, 2010, 07:11 PM

See just prove that tweaks do fix stuff up

How the sound Icewill?

icewill · Oct 16, 2010, 07:29 PM

The sound is much better Robert, and the driver is more complete than the official one, espectially it won't 'pop' anymore

thanks for the great work! By the way, is there a chance that you could fix the THX console and the installation problem? Or for Auzentech prelude THX console is not available forever?

Robert McClelland · Oct 16, 2010, 08:08 PM

Would see I think I can used Pax master suite with new 3.50.08 on it I let you know maybe it can installed that way.

icewill · Oct 16, 2010, 09:19 PM

Thank you very much Robert. Was I the only one who has this problem? Maybe I should go into save mode to install it? Also, even with your newest prelude driver, the THX console says it can't find any supportive device. So does the new 3.50.08 THX work with the new driver? Or it's only my problem?

icewill · Oct 16, 2010, 10:17 PM

I tested it in save mode, still couldn't get it to install. /sadface

Robert McClelland · Oct 16, 2010, 11:22 PM

ya it's know issue with THX Console I do something next week for it

.

icewill · Oct 17, 2010, 12:53 AM

That'll be awesome Robert, thanks in advance. Also it's comforting to know that it's not my prelude's problem.

Robert McClelland · Oct 17, 2010, 01:01 AM

Ya I figure it out sooner or later like I always do

.

gregor85 · Oct 17, 2010, 05:06 PM

Hi Robert!

Any news on the P17 drivers? I still can't get the subwoofer to work. And there's another problem when I install the PAX Vista and 7 P17 Series V1.00 drivers, Windows 7 automatically installs the Creative drivers after a couple of reboots, how do you disable that?

Be well,

Gregor

Robert McClelland · Oct 18, 2010, 07:52 PM

Not yet I will have friend this week help me test out inf make sure works good enough. To disable that you have to Hard Ware then Device Installation Setting and stay no and no that way you don't get windows driver updated from windows updated.

Robert McClelland · Oct 18, 2010, 08:11 PM

download here > PAX Creative Download Section Mods
discus here >

felana · Oct 19, 2010, 03:10 PM

Will test the THX console on Auzen Bravura, I'll report later. thx Rob

Robert McClelland · Oct 19, 2010, 06:56 PM

Ya please test new suite guys thanks

.

felana · Oct 21, 2010, 07:32 AM

Have tried the PAX Master 1.50 on my Bravura, but still cant install the THX Console, got the same error message.

Robert McClelland · Oct 21, 2010, 02:28 PM

I guess it need work

. see this why I haven't let out on other forums yet.

djdobro · Oct 21, 2010, 04:14 PM

Hey guys. I`m going to be an owner of a Creative Oem Dell X-fi Xtreme Music card. It is stated it is going to be SB0460 but i doubt it, it will be sb0467 or what ever the number was. Any way...I am with a 32 bit Win7 so I downloaded "PAX PCI XFI Win7 Driver V1.00" and "PAX PCI XFI All-OS-Driver V3.10" just in case

Are these the newest drivers for this card, and should i Download anything else, i saw some utilities that i didn't quite get what they are for. I would be really thankful if anyone could help out on this one. I read some stuff and came to a conclusion that if i am able to use Creative drivers they are not as good as the Pax ones.

eSp!s0 · Oct 21, 2010, 10:38 PM

There is an own topic for Auzentech Suites/Drivers: PAX Auzentech Products Driver

Would like to see (more) posts/feedback to Auzentech stuff there

Here are too many posts related to different drivers/soundcards, it`s hard to find recent/important posts related to the soundcard a person has.
So please guys, use the topic above for Auzentech things.
I am looking forward to seeing more people there

Robert McClelland · Oct 22, 2010, 01:15 AM

Quote:

Originally Posted by djdobro

Hey guys. I`m going to be an owner of a Creative Oem Dell X-fi Xtreme Music card. It is stated it is going to be SB0460 but i doubt it, it will be sb0467 or what ever the number was. Any way...I am with a 32 bit Win7 so I downloaded "PAX PCI XFI Win7 Driver V1.00" and "PAX PCI XFI All-OS-Driver V3.10" just in case

Are these the newest drivers for this card, and should i Download anything else, i saw some utilities that i didn't quite get what they are for. I would be really thankful if anyone could help out on this one. I read some stuff and came to a conclusion that if i am able to use Creative drivers they are not as good as the Pax ones.

Download win 7 drivers for windows 7 version other version for xp and vista.

icewill · Oct 22, 2010, 06:40 AM

Hey Robert it's me again. Thanks for the new release however, I ran into the same problem as felana on not only the THX cosole but also the Console Launcher. Neither of them will install. I tried a clean install in normal mode and save mode as well. So I'm back to Master Suite V1.00 again. Thanks for the fast release anyways, will be waiting for your next release

P.S. I used driver sweeper to do a registry clean too.

Robert McClelland · Oct 22, 2010, 03:56 PM

I won't be releasing new THX Console 3.50.08 there to many bugs or won't work on Titanium xfi cards I can confirm that plus I'm getting short cut error in the installer so I guess everyone else be using 3.10.08 then for now.

Lunde · Oct 23, 2010, 05:31 PM

hi Robert
i have the same problems like post #1070
but PAX PCI XFI All-OS-Driver V3.10 plus master suite 1.00 works like a charm
thanx for the pax drivers..

rianhardi · Oct 24, 2010, 10:20 AM

hi robert iam new here, i use win 7 64 bit and x-fi titanium card, i like your drivers (i use v1.30 driver, its work amazing) and when i installed pax master suit v.1.0 , ican't use console launcher and control audio panel, it's say that my card not supported, i try everything but no luck, so please , help me what do ido to make it work, thank you

Valuial · Oct 24, 2010, 06:54 PM

Hi there,

Using win 7 x64 and a xfi fatality platinium with AIO 2k10 pax pack, i have runned into error I-001 while installing pax all os 3.10 and master suite 1.50 even after removing driver and cleaning registery using proper tools. CLauncher et thx console installation was impossible.

Install.log error message: Error=I-001 DirectX not found.

Just update directx and voila.

Sound is better than before and it fixed a few issues.

Thx for your hardwork.

Robert McClelland · Oct 24, 2010, 07:06 PM

I will be updated master suite soon. But no 3.50.08 doesn't like it that much

I try make work time time again no luck shortcut won't work with it.

Oct 14, 2010, 11:24 PM	#1051
Killer344 HardwareHeaven Newbie Join Date: Apr 2010 Posts: 16 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread I'm back at home, just msg me on msn when you can.

Oct 15, 2010, 11:35 PM	#1052
f1n3 HardwareHeaven Newbie Join Date: Oct 2010 Posts: 5 Rep Power: 0	Device not supported Hey Robert, I installed the newest (Downloaded everything an hour ago) PAX PCIe Titanium ALL OS Driver V3.10 and PAX MASTER Suite V1.00. I installed both by using the "setup.exe". It installed just fine and I can see the soundcard at my "Device Manager". But I can't hear anything. When I try to open the "Console Starter" I get this error: When I press "yes" I get this: Is it because you haven't got my IDs yet or is it another problem? And when I install the "Suite", can I "cancel" the ones I don't want to be installed and it just goes on with the next one? - f1n3

Oct 16, 2010, 02:21 AM	#1053
Killer344 HardwareHeaven Newbie Join Date: Apr 2010 Posts: 16 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread Hey rob, this THX console I found on the Auzentech's forum works fine: http://rs335.rapidshare.com/files/35...le_3_50_05.exe

Oct 16, 2010, 02:43 AM	Thread Starter #1054
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: New Pax Driver and Suite Discus Thread Yup it was made by Dan K Compiled on 02/27/2009 by Daniel Kawakami Can't used sorry. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now Last edited by Robert McClelland; Oct 16, 2010 at 02:51 AM.

Oct 16, 2010, 04:42 PM	#1055
icewill HardwareHeaven Newbie Join Date: Oct 2010 Posts: 12 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread Hi Robert, thanks for your amazing drivers and packs. Unfortunately I encountered the same problem as Killer did. I'm unable to install the THXConU, SmartRec, and one more I cant remember. Is there a way to fix it? I'm anxious to use this new pack of yours Cheers PS. I don't know whether it is because the errors I had, after installing the driver, the setup terminated itself without asking to reboot. After I reboot my computer, unlike the Auzentech driver pack, all of the software I just installed didn't go into the uninstall menu (the menu you find in the control panel that lets you uninstall stuff). Therefore not only I can't uninstall the whole back at the sametime, also I can't even uninstall any of them. Last edited by icewill; Oct 16, 2010 at 04:54 PM.

Oct 16, 2010, 05:40 PM	#1056
icewill HardwareHeaven Newbie Join Date: Oct 2010 Posts: 12 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread In order to uninstall the software I reinstalled the PAX master suit v1.00 over it, and then I can uninstall them thru control panel. Also, the THX console from master suit won't work with the Auzentech prelude official driver and the newest prelude driver you put out. The only driver that the THX console work with was the Daniel_k's XFI SupportPack 2.0, however, with that driver my mic won't work. So I'm now using only the driver from your Prelude pack, plus the master suit v1.00 with some of the feature unusable like the THX console. Just to let you know my situation. I'm very thankful of your work. Please take your time to work on it.

Oct 16, 2010, 07:11 PM	Thread Starter #1057
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: New Pax Driver and Suite Discus Thread See just prove that tweaks do fix stuff up How the sound Icewill? __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

Oct 16, 2010, 07:29 PM	#1058
icewill HardwareHeaven Newbie Join Date: Oct 2010 Posts: 12 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread The sound is much better Robert, and the driver is more complete than the official one, espectially it won't 'pop' anymore thanks for the great work! By the way, is there a chance that you could fix the THX console and the installation problem? Or for Auzentech prelude THX console is not available forever?

Oct 16, 2010, 08:08 PM	Thread Starter #1059
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: New Pax Driver and Suite Discus Thread Would see I think I can used Pax master suite with new 3.50.08 on it I let you know maybe it can installed that way. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

Oct 16, 2010, 09:19 PM	#1060
icewill HardwareHeaven Newbie Join Date: Oct 2010 Posts: 12 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread Thank you very much Robert. Was I the only one who has this problem? Maybe I should go into save mode to install it? Also, even with your newest prelude driver, the THX console says it can't find any supportive device. So does the new 3.50.08 THX work with the new driver? Or it's only my problem?

Oct 16, 2010, 10:17 PM	#1061
icewill HardwareHeaven Newbie Join Date: Oct 2010 Posts: 12 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread I tested it in save mode, still couldn't get it to install. /sadface

Oct 16, 2010, 11:22 PM	Thread Starter #1062
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: New Pax Driver and Suite Discus Thread ya it's know issue with THX Console I do something next week for it . __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

Oct 17, 2010, 12:53 AM	#1063
icewill HardwareHeaven Newbie Join Date: Oct 2010 Posts: 12 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread That'll be awesome Robert, thanks in advance. Also it's comforting to know that it's not my prelude's problem.

Oct 17, 2010, 01:01 AM	Thread Starter #1064
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: New Pax Driver and Suite Discus Thread Ya I figure it out sooner or later like I always do . __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

Oct 17, 2010, 05:06 PM	#1065
gregor85 HardwareHeaven Newbie Join Date: Sep 2010 Posts: 4 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread Hi Robert! Any news on the P17 drivers? I still can't get the subwoofer to work. And there's another problem when I install the PAX Vista and 7 P17 Series V1.00 drivers, Windows 7 automatically installs the Creative drivers after a couple of reboots, how do you disable that? Be well, Gregor

Oct 18, 2010, 07:52 PM	Thread Starter #1066
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: New Pax Driver and Suite Discus Thread Not yet I will have friend this week help me test out inf make sure works good enough. To disable that you have to Hard Ware then Device Installation Setting and stay no and no that way you don't get windows driver updated from windows updated. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

Oct 18, 2010, 08:11 PM	Thread Starter #1067
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	PAX MASTER Suite V1.50 download here > PAX Creative Download Section Mods discus here > __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

Oct 19, 2010, 03:10 PM	#1068
felana HardwareHeaven Newbie Join Date: Mar 2010 Posts: 6 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread Will test the THX console on Auzen Bravura, I'll report later. thx Rob

Oct 19, 2010, 06:56 PM	Thread Starter #1069
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: New Pax Driver and Suite Discus Thread Ya please test new suite guys thanks . __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

Oct 21, 2010, 07:32 AM	#1070
felana HardwareHeaven Newbie Join Date: Mar 2010 Posts: 6 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread Have tried the PAX Master 1.50 on my Bravura, but still cant install the THX Console, got the same error message.

Oct 21, 2010, 02:28 PM	Thread Starter #1071
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: New Pax Driver and Suite Discus Thread I guess it need work . see this why I haven't let out on other forums yet. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

Oct 21, 2010, 04:14 PM	#1072
djdobro HardwareHeaven Newbie Join Date: Oct 2010 Posts: 8 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread Hey guys. I`m going to be an owner of a Creative Oem Dell X-fi Xtreme Music card. It is stated it is going to be SB0460 but i doubt it, it will be sb0467 or what ever the number was. Any way...I am with a 32 bit Win7 so I downloaded "PAX PCI XFI Win7 Driver V1.00" and "PAX PCI XFI All-OS-Driver V3.10" just in case Are these the newest drivers for this card, and should i Download anything else, i saw some utilities that i didn't quite get what they are for. I would be really thankful if anyone could help out on this one. I read some stuff and came to a conclusion that if i am able to use Creative drivers they are not as good as the Pax ones.

Oct 21, 2010, 10:38 PM	#1073
eSp!s0 HardwareHeaven Lover Join Date: Mar 2008 Location: Germany Posts: 100 Rep Power: 0	AW: New Pax Driver and Suite Discus Thread There is an own topic for Auzentech Suites/Drivers: PAX Auzentech Products Driver Would like to see (more) posts/feedback to Auzentech stuff there Here are too many posts related to different drivers/soundcards, it`s hard to find recent/important posts related to the soundcard a person has. So please guys, use the topic above for Auzentech things. I am looking forward to seeing more people there __________________

Oct 22, 2010, 06:40 AM	#1075
icewill HardwareHeaven Newbie Join Date: Oct 2010 Posts: 12 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread Hey Robert it's me again. Thanks for the new release however, I ran into the same problem as felana on not only the THX cosole but also the Console Launcher. Neither of them will install. I tried a clean install in normal mode and save mode as well. So I'm back to Master Suite V1.00 again. Thanks for the fast release anyways, will be waiting for your next release P.S. I used driver sweeper to do a registry clean too.

Oct 22, 2010, 03:56 PM	Thread Starter #1076
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: New Pax Driver and Suite Discus Thread I won't be releasing new THX Console 3.50.08 there to many bugs or won't work on Titanium xfi cards I can confirm that plus I'm getting short cut error in the installer so I guess everyone else be using 3.10.08 then for now. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

Oct 23, 2010, 05:31 PM	#1077
Lunde HardwareHeaven Newbie Join Date: Jan 2004 Posts: 13 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread hi Robert i have the same problems like post #1070 but PAX PCI XFI All-OS-Driver V3.10 plus master suite 1.00 works like a charm thanx for the pax drivers..

Oct 24, 2010, 10:20 AM	#1078
rianhardi HardwareHeaven Newbie Join Date: Oct 2010 Posts: 2 Rep Power: 0	Re: New Pax Driver and Suite Discus Thread hi robert iam new here, i use win 7 64 bit and x-fi titanium card, i like your drivers (i use v1.30 driver, its work amazing) and when i installed pax master suit v.1.0 , ican't use console launcher and control audio panel, it's say that my card not supported, i try everything but no luck, so please , help me what do ido to make it work, thank you

Oct 24, 2010, 06:54 PM	#1079
Valuial HardwareHeaven Newbie Join Date: Oct 2010 Posts: 1 Rep Power: 0	Re : New Pax Driver and Suite Discus Thread Hi there, Using win 7 x64 and a xfi fatality platinium with AIO 2k10 pax pack, i have runned into error I-001 while installing pax all os 3.10 and master suite 1.50 even after removing driver and cleaning registery using proper tools. CLauncher et thx console installation was impossible. Install.log error message: Error=I-001 DirectX not found. Just update directx and voila. Sound is better than before and it fixed a few issues. Thx for your hardwork. Last edited by Valuial; Oct 24, 2010 at 07:00 PM.

Oct 24, 2010, 07:06 PM	Thread Starter #1080
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Re: New Pax Driver and Suite Discus Thread I will be updated master suite soon. But no 3.50.08 doesn't like it that much I try make work time time again no luck shortcut won't work with it. __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now