HardwareHeaven.com
HardwareHeaven.com
Looking for the skin chooser?
 
 
  • Home

  • Hardware reviews

  • Articles

  • News

  • Tools

  • Gaming at HardwareHeaven

  • Forums

 

Corsair Performance Pro 256GB SSD Review


by Stuart Davidson - 29th November 2011
Navigation  Go back to the beginning      Go to final Page  Review Menu
Discuss Here
Corsair Performance Pro 256GB SSD Review

The Corsair Performance Pro SSD




Corsair have tweaked their SSD casing since we last looked at a drive and it is now slightly more curved at the corners with the screws securing each half in place located on the side. A product sticker can be found on the top and flipping the drive over we see the SATA 3 power and data connectors.

Inside we find that Corsair use pads on each of the main components to provide added support to the drive casing.


Inside Corsair populate a single side of the green PCB with NAND flash and in this case it is eight 32GB MLC NAND flash chips. These are Toshiba branded and are toggle mode 34nm parts. Along with these we find cache in the form of two 256MB NANYA DDR3 chips.

On the other side of the PCB we find Marvell's 88SS9174-BKK2 controller, a new revision of the hardware used by Crucial and Intel on some of their drives.


On this drive the NAND configuration used gives the drive a formatted capacity of 238GB in Windows 7 and Corsair rate their SATA 3 based 256GB model at 515MB/s read with write at 440MB/s. IOPS are rated at 65,000 random write and this performance is then maintained by TRIM in operating systems such as Windows 7 and inbuilt garbage collection on RAID systems. Finally, when in use the Performance Pro uses 1.4A.
Navigation  First Page      Last Page  Discuss Here