HardwareHeaven.com
Click Here
HardwareHeaven.com
Looking for the skin chooser?
 
 
  • Home

  • Hardware reviews

  • Articles

  • News

  • Tools

  • Gaming at HardwareHeaven

  • Forums

 

North Q 3340WLA Extreme


by Grace - 10th April 2008
Navigation  You are at the start  You are at the start    Go to final Page  Review Menu
Discuss Here

Introduction

Today we will take a look at NorthQ's latest and greatest CPU cooler, the 3340WLA Extreme. There certainly isn’t a shortage of CPU coolers on the market today and they come in all shapes, sizes and prices. Nearly two years ago NorthQ released the 3310BL UFO which we reviewed and it was a good cooler at the time, a design which they continuously evolved (and enlarged) for two years in order to keep up with the growing demand for better CPU coolers.

The 3340WLA Extreme however is an entirely new design instead of an oversized version of the old 3310BL and today we will find out if it as capable as their past efforts.

Manufacturer’s features and specifications:

  • Cooler Dimension: 125 x 52 x 142 mm (L * W * H)
  • Fan Dimension: 120 x 120 x 25 mm
  • Rated Voltage: 12 V
  • Fan speed: 1000 - 2000RPM +- 10%
  • Noise Level : 12 - 22dB(A)
  • Air Flow: 53,5 - 78,5CFM
  • Bearing Type: Hydromatic
  • bearing Life Time: 30,000 Hours
  • Connector: 3 Pin Fan controller with build-in FAN alarm included
  • Total Weight: 420 g  
  • AMD: Sempron 3500+ or higher Athlon 64 5000+ or higher Athlon 64 x2 6000+ or higher Athlon FX62 Opteron 2,6GHz or higher  
  • Intel: Core 2 Duo / Core 2 Quad Pentium(64) 3,6GHz or higher Pentium D 3.6GHz or higher Pentium 4 3.8GHz or higher Celeron 3.33GHz or higher

Packaging and bundle


The 3340WLA is supplied in a small cardboard package which has a window over the cooler’s body. The design of the package is quite basic but there is a wealth of information around it concerning the cooler. Inside the cardboard box everything is separated and secured by a clear plastic wrapping.

Inside the packaging you will find a small but practical bundle, there is a retention bracket which is installed on a socket 775 motherboard (Socket AM2/AM2+ users will not need it as the cooler can be secured on the reference bracket), a leaflet with basic installation instructions, a fan speed controller with an integrated alarm function which is installed in an expansion slot at the rear of the case and a crystal clear 120mm fan. The fan has a maximum speed of 2000RPM, good airflow and noise characteristics and, according to NorthQ, a hydromatic bearing. We seriously doubt that the bearing of the fan is hydromatic (hydromatic stands for a constant speed rotational device which is hydraulically operated) since this is a typical DC fan, by the expected lifetime of the fan and its motor’s noise (or the lack of) we can estimate that this is a high quality sleeve bearing fan, or somehow based on a sleeve bearing motor.

Navigation        Last Page  Discuss Here