HardwareHeaven.com
HardwareHeaven.com
Looking for the skin chooser?
 
 
  • Home

  • Hardware reviews

  • Articles

  • News

  • Tools

  • Gaming at HardwareHeaven

  • Forums

 

Enlight Sniper Power 650W PSU


by Grace - 8th September 2008
Navigation  You are at the start  You are at the start    Go to final Page  Review Menu
Discuss Here

Introduction


Enlight are  a well known manufacturer of PC components and peripherals, albeit not very popular among hardcore enthusiasts. They are a conservative company with few high end products and they mainly aim at the value and mainstream segments of the market. They do have a few products designed for gamers and enthusiasts though, and today we will take a look at one of them; the Sniper Power 650W PSU. Enlight currently has no 800W+ units and this product is their second most powerful they currently produce, but its output is more than enough for the needs of the majority of PC enthusiasts and gamers. Let us have a closer look at it and see how well it can really perform.

Manufacturer Features and Specifications
  • 1 x 24 pin mainboard power
  • 1 x 4 pin 12V
  • 1 x 8 pin EPS12v
  • 2 x Loom with 3x4 pin MOLEX + 1.4 pin FDD (Total 6+1)
  • 2 x Loom with 3 x SATA Power (Total 6)
  • 1 x Loom with 2 x 6 pin PCI Express Connectors
  • 120mm Fan (2xBall Bearing) Temperature Controlled
  • Short Circuit Protection
  • Over Voltage Protection
  • Over Current Protection
  • Active PFC > 95% Efficiency
  • 80 PLUS® Efficient
  • Low Acoustics
  • 3 x 12v Rails
Voltage 5V
Regulation ±5%
MinimumLoad 0.3A
MaximumLoad 25.0A
Ripple & Noise(Vp-p) 70 mV
Voltage 3.3V
Regulation ±5%
MinimumLoad 0.5A
MaximumLoad 25.0A
Ripple & Noise(Vp-p) 70 mV
Voltage 12V1
Regulation ±5%
MinimumLoad 1.0A
MaximumLoad 16.0A
Ripple & Noise(Vp-p) 150 mV
Voltage 12V2
Regulation ±5%
MinimumLoad 1.0A
MaximumLoad 16.0A
Ripple & Noise(Vp-p) 150 mV
Voltage 12V3
Regulation ±5%
MinimumLoad 1.0A
MaximumLoad 16.0A
Ripple & Noise(Vp-p) 150 mV
Voltage -12V
Regulation ±10%
MinimumLoad 0.0A
MaximumLoad 0.5A
Ripple & Noise(Vp-p) 150 mV
Voltage 5Vsb
Regulation ±5%
MinimumLoad 0.0A
MaximumLoad 2.5A
Ripple & Noise(Vp-p) 70 mV

Rail
Wattage
Maximum load
+3.3V
180w
631.5W
25.0A
+5V
25.0A
+12V1
540w
16.0A
45A
+12V2
16.0A
+12V3
16.0A
-12V
6w
18.5W
0.5A
+5Vsb
12.5w
2.5A

Packaging and Bundle




The Enlight Sniper Power 650W unit is packed inside a fancy cardboard box. There is plenty of artwork and details concerning the features of the unit, but the box itself is thin and there is little protection for the unit itself. Inside the box you will also find a typical AC power cable, a small manual and four 3M mounting screws.
Navigation        Last Page  Discuss Here