 |
|
Thermaltake Toughpower 1000W PSU - Introduction
Thermaltake are best known for their chassis and coolers but also have a strong presence in the PSU market.
Today we are going to have a look at one of their most powerful products, the Thermaltake Toughpower Cable Management 1000W unit. Thermaltake list some impressive performance figures for the unit, offer a very long warranty and price it aggressively. Is the Thermaltake Toughpower Cable Management 1000W unit the perfect option for enthusiasts who do not want to break the bank? Read on to find out. |
Manufacturer Features & Specifications
- Stable 1000W continuous output, peak power at 1100W (at 50°C operating environment)
- Four independent & dedicated +12V rails(12V1,12V2,12V3,12V4) provides superior performance for PC system
- NEW! Three 8pin and three 6pin PCI-E connectors design supports Multi-GPU Graphic card
- Supports Dual Core CPU / Quad Core CPU / Nvidia SLI & Quad SLI and all Multi-Core GPU technologies
- Modularized Cable Management to eliminate clutter and improve airflow inside the case
- Independent Voltage Circuit: offers unflappable current delivery under heavy load
- Strict voltage regulation (±3%): provides steady voltage for system
- Active Power Factor Correction (PF>0.99) and high efficiency (up to 87%)
- Industrial grade components (capacitor, transformer, etc)
- High reliability: MTBF>120,000 hours
- Quiet and reliable 14cm ball-bearing fan
- Protections: Over Current, Over Voltage, Under Voltage, Over Temperature, Over Power, and Short-Circuit protection
- Safety / EMI Approvals: CE, CB, TUV, FCC, UL, CUL, and BSMI certified
| GENERAL |
| - Wattage |
1000 Watts |
| - Fan |
140mm Fan
2300RPM ±10% |
| - Efficiency |
87%+ |
| - PFC |
Active PFC
(PF > 0.9) |
| - Hold-Up Time |
16ms |
| - Switches |
ATX Logic on-off additional power rocker switch |
| - Motherboard Connectors |
24-pin Main Connector
8-pin Power Connector
4+4-pin Power Connector |
| - Power Good Signal |
100-500ms |
| - Form Factor |
ATX 12V 2.2 |
| - Dimension |
7.9 x 5.9 x 3.4 inch (L)x(W)x(H)
200 x 150 x 86 mm (L)x(W)x(H) |
| - Warranty |
5 Years |
| - Certifications |
ATI CrossFire Certified
80 Plus Certified |
| AC INPUT |
| - Input Voltage |
115 VAC ~ 230 VAC |
| - Input Current |
13A |
| - Input Frequency Range |
47 ~ 63 Hz |
| - Inrush Current |
|
| - Operating Range |
|
| - MTBF |
120,000 hours minimum (at 25°C) |
| - RFI / EMI |
CE, CB, TUV, FCC, UL, CUL, BSMI |
| OUTPUT TABLE |
| Output Voltage |
+12V1 |
+12V4 |
+3.3V |
+12V2 |
+12V3 |
+5 |
-12V |
+5VSB |
| Output Current Max. |
20A |
36A |
30A |
20A |
36A |
30A |
0.8A |
3A |
| Output Current Min. |
1A |
1A |
0.5A |
1A |
1A |
0.5A |
0A |
0A |
| Output Current Peak |
- |
- |
- |
- |
- |
- |
- |
3.5A |
| Regulation |
+3,-3% |
+3,-3% |
+3,-3% |
+3,-3% |
+3,-3% |
+3,-3% |
+10,-10% |
+3,-5% |
| Noise & Ripple |
120mV |
120mV |
50mV |
120mV |
120mV |
50mV |
120mV |
50mV |
| Total Power |
1000W |
| ENVIRONMENT |
| - Operating Temperature |
10°C to 50°C |
| - Storage Temperature |
-20°C to 70°C |
| - Operating Humidity |
20% to 90%, non-condensing |
| - Storage Humidity |
5% to 95%, non-condensing |
| PROTECTION |
| - Over Voltage Protection |
+3.3V trip point @ 4.5 Vmax
+5.0V trip point @ 7.0 Vmax
+12.0V trip point @15.6 Vmax |
| - Over Current Protection |
+3.3V range @ 33A ~ 50A
+5.0V range @ 33A ~ 50A
+12V1 & +12V2 range @ 22A ~ 35A
+12V3 & +12V4 range @ 39A ~ 55A |
| - Over Load Protection |
|
| - Over Termperature Protection |
|
| - Under Voltage Protection |
+3.3V trip point @ 2.0 Vmax
+5.0V trip point @ 3.3 Vmax
+12.0V trip point @ 8.5 Vmax |
| - Short Circuit Protection |
All Output to GND |
|
|
