No Midi Output

jsghost · Dec 11, 2002, 12:33 AM

SB Audigy player.
Windows ME
356MB Ram
AMD Duron 1.1ghz.
Evolution MK149 Keyboard.
VIA 4 in 1 Chipset (up to date drivers).

I have installed the kx driver (3526) to try and overcome a
problem with Magix Music Studio 2003 deluxe, the error
involved the hardwarematically set sample rate of 48000.
(As part of this I had to install and unistall a demo of Cubase VST.)

This did solve the problem but now I get no midi output at all.
The problem exist in all software including prev fully functional
software so it is not exclusive to the magix software and must be
related to the driver.

Midi input is working fine and registers, notes record to the score
but I get no sounds from the on-card synth. I have tried each of the possible synths in the kx mixer and none work.

Any ideas?

Max M. · Dec 11, 2002, 02:17 AM

In order to get sound from on-board synth you should upload an soundfont bank to it first using "kX SoundFont" (there's no bank loaded by default).
You can find general midi soundfont bank in the system folder of your windows...

jsghost · Dec 12, 2002, 06:39 PM

Thanks Max. I get midi sounds now.
But when I start to play or records I get a pop just afterwards,
does anyone know how to eliminate this?

ZaGhost · Dec 13, 2002, 08:14 PM

I had the same thing using the 2 meg GM soundfont, probably leftover from the creative drivers.... no artifacts using the 8 meg APS soundfont though (leftover from previous APS 1.84 install)
+ they sound better

jsghost · Dec 14, 2002, 12:20 PM

Help!

I am trying to use MS Studio 2003 still, it worked for a couple of minutes and apart from the popping described in my previous post was OK. Next time I went to open it I got an error message
saying Midistudiodlx has caused an error on ASIODXFD.DLL.
It simply wont even open now.

I was so near and yet so far, can anybody help?

jsghost · Dec 15, 2002, 12:10 AM

I fixed it myself, appears creative drivers not properly replaced or they reboot on startup?
Anyway, deleted the remaining creative files and back into MS Studio now.

I 'm still getting those annoying pops during recording though.
I have tried updating bios/drivers etc, increased latency settings as far as I can, though I feel they are still too low at 17.07ms,
would rather use 25-40ms. Anyway of getting updated settings for kx driver?

Max M. · Dec 15, 2002, 12:24 AM

>ASIODXFD.DLL

btw. Did you select "kX ASIO" or use DirectSound asio wrapper?

>Anyway of getting updated settings for kx driver?

if you mean changing "kX ASIO" latency then you can set it via
control panel should be accessable from ASIO host. I don't know if Magix Music have an option of launching of that panel though...

---
btw. and let's do not mix different topics in the same thread...
There's special "ASIO" node in this forum... It could be very friendly for one reading forum later If you'd start ASIO relaited thread there...

Dec 11, 2002, 12:33 AM	#1
jsghost DriverHeaven Newbie Join Date: Dec 2002 Location: England Posts: 4 Rep Power: 0	No Midi Output SB Audigy player. Windows ME 356MB Ram AMD Duron 1.1ghz. Evolution MK149 Keyboard. VIA 4 in 1 Chipset (up to date drivers). I have installed the kx driver (3526) to try and overcome a problem with Magix Music Studio 2003 deluxe, the error involved the hardwarematically set sample rate of 48000. (As part of this I had to install and unistall a demo of Cubase VST.) This did solve the problem but now I get no midi output at all. The problem exist in all software including prev fully functional software so it is not exclusive to the magix software and must be related to the driver. Midi input is working fine and registers, notes record to the score but I get no sounds from the on-card synth. I have tried each of the possible synths in the kx mixer and none work. Any ideas?

Dec 11, 2002, 02:17 AM	#2
Max M. h/h member-shmember Join Date: Dec 2002 Location: Evil Empire Posts: 2,640 Rep Power: 69	No sound from on-board synthesizer In order to get sound from on-board synth you should upload an soundfont bank to it first using "kX SoundFont" (there's no bank loaded by default). You can find general midi soundfont bank in the system folder of your windows... __________________

Dec 13, 2002, 08:14 PM	#4
ZaGhost DriverHeaven Junior Member Join Date: Dec 2002 Location: Nova Scotia Posts: 30 Rep Power: 0	I had the same thing using the 2 meg GM soundfont, probably leftover from the creative drivers.... no artifacts using the 8 meg APS soundfont though (leftover from previous APS 1.84 install) + they sound better __________________ Asrock Dual Sata II / AMD Athlon 64 3700+ / 200G + 60G HD's / 1G DDR (2 gigs coming) KX 3538m / CT4670 & CT4832 / Cubase SX3 / XP-Pro / dual boot, 1 recording, 1 everything else Behringer UB2442FX-Pro

Dec 15, 2002, 12:24 AM	#7
Max M. h/h member-shmember Join Date: Dec 2002 Location: Evil Empire Posts: 2,640 Rep Power: 69	>ASIODXFD.DLL btw. Did you select "kX ASIO" or use DirectSound asio wrapper? >Anyway of getting updated settings for kx driver? if you mean changing "kX ASIO" latency then you can set it via control panel should be accessable from ASIO host. I don't know if Magix Music have an option of launching of that panel though... --- btw. and let's do not mix different topics in the same thread... There's special "ASIO" node in this forum... It could be very friendly for one reading forum later If you'd start ASIO relaited thread there... __________________

Dec 12, 2002, 06:39 PM	Thread Starter #3
jsghost DriverHeaven Newbie Join Date: Dec 2002 Location: England Posts: 4 Rep Power: 0	Thanks Max. I get midi sounds now. But when I start to play or records I get a pop just afterwards, does anyone know how to eliminate this?

Dec 14, 2002, 12:20 PM	Thread Starter #5
jsghost DriverHeaven Newbie Join Date: Dec 2002 Location: England Posts: 4 Rep Power: 0	Help! I am trying to use MS Studio 2003 still, it worked for a couple of minutes and apart from the popping described in my previous post was OK. Next time I went to open it I got an error message saying Midistudiodlx has caused an error on ASIODXFD.DLL. It simply wont even open now. I was so near and yet so far, can anybody help?

Dec 15, 2002, 12:10 AM	Thread Starter #6
jsghost DriverHeaven Newbie Join Date: Dec 2002 Location: England Posts: 4 Rep Power: 0	I fixed it myself, appears creative drivers not properly replaced or they reboot on startup? Anyway, deleted the remaining creative files and back into MS Studio now. I 'm still getting those annoying pops during recording though. I have tried updating bios/drivers etc, increased latency settings as far as I can, though I feel they are still too low at 17.07ms, would rather use 25-40ms. Anyway of getting updated settings for kx driver?