No midi on SB Live

MicroSonic · Aug 17, 2005, 09:31 AM

I have Sonar 2.2 and Audio out (ASIO & WDM) is OK. I can send midi to other synths via Uart but I can't play Soundfonts and SB onboard Midi sounds using synth1 or synth2 does not work either. I have loaded Soundfonts in Kx Mixer and Sonar.

When the audio output is set to 5.1 and speakertest runs, the rear output is suddenly center and sub, but from Sonar the rear output plays left and right on kx0100 0/1 output.

/Micro

thomasabarnes · Aug 18, 2005, 08:44 PM

"and SB onboard Midi sounds using synth1 or synth2 does not work either."

What do you mean "onboard MIDI? When you load a .sf2 into one of the kX Synths, you get no sound?

What driver are you using? What's your sound card model?

Are you using the kX DSP default DSP settings?

MicroSonic · Aug 19, 2005, 10:34 PM

I don't get any sound loading Soundfonts in kxMixer & in Sonar. The SB card is SB0100. Driver is 3537. OS is XP. DSP using kxdefault.kx.

I tried to reinstall kx project. When rebooting the computer I got an errormsg: Error loading driver - please de install (the msg was in danish - so this is probably a poor translation). Then I tried to install in protected mode as suggested on website, but system got cold and died installing kxasio.dll...

Tried the same in normal mode. Everything seems ok for 2 minutes. Audio (softsynths) and midi playing together. kx Wave SB1020 [ffe0] 6/7 was suddenly alive. Then the computer froze. Had to turn it off and now I'm back to uart as the only thing playing anything (only external synths). No audio at all - not even the speaker test.

MicroSonic · Aug 19, 2005, 11:15 PM

I tried to reinstall drivers again and I got two minutes more where I could listen to both midi and audio. Then the system hung up....

thomasabarnes · Aug 21, 2005, 05:46 PM

The only other thing I can suggest, if you havent tried it already, is to completely uninstall the kX driver. If you had a Creative driver completely uninstall it and all Creative software. Turn off System restore.

Get Driver Cleaner Pro from this Forum: http://driverheaven.net/showthread.php?t=76416

In safe mode, run Driver Cleaner Pro for kX and Creative audio. On Driver Cleaner Pro under Tools menu, use Cab Cleaner for what Windows Service pack you have, and reboot. Reinstall kX, and reboot. Turn System restore back on, upon successful install of kX.

If this doesnt work for you, I dont know what's wrong.

Aug 17, 2005, 09:31 AM	#1
MicroSonic DriverHeaven Newbie Join Date: Aug 2005 Posts: 4 Rep Power: 0	No midi on SB Live I have Sonar 2.2 and Audio out (ASIO & WDM) is OK. I can send midi to other synths via Uart but I can't play Soundfonts and SB onboard Midi sounds using synth1 or synth2 does not work either. I have loaded Soundfonts in Kx Mixer and Sonar. When the audio output is set to 5.1 and speakertest runs, the rear output is suddenly center and sub, but from Sonar the rear output plays left and right on kx0100 0/1 output. /Micro

Aug 18, 2005, 08:44 PM	#2
thomasabarnes DriverHeaven Maniac Join Date: Jan 2003 Location: USA Posts: 1,345 Rep Power: 46 System Specs	"and SB onboard Midi sounds using synth1 or synth2 does not work either." What do you mean "onboard MIDI? When you load a .sf2 into one of the kX Synths, you get no sound? What driver are you using? What's your sound card model? Are you using the kX DSP default DSP settings? __________________ May a song always touch you in a positive way. Sonar 8 Producer Edition, Windows 7 Pro 64Bit, MOTU UltraLite MK3, 250 GB HDD 7200 rpm, 80 GB HDD 7200 rpm, Lite-On DVDRW LH 18A1P My Music Production: Top 40, Contemporary Christian, Pop/Rock, Decent Rap, Inspirationals, and Children Songs

Aug 21, 2005, 05:46 PM	#5
thomasabarnes DriverHeaven Maniac Join Date: Jan 2003 Location: USA Posts: 1,345 Rep Power: 46 System Specs	The only other thing I can suggest, if you havent tried it already, is to completely uninstall the kX driver. If you had a Creative driver completely uninstall it and all Creative software. Turn off System restore. Get Driver Cleaner Pro from this Forum: http://driverheaven.net/showthread.php?t=76416 In safe mode, run Driver Cleaner Pro for kX and Creative audio. On Driver Cleaner Pro under Tools menu, use Cab Cleaner for what Windows Service pack you have, and reboot. Reinstall kX, and reboot. Turn System restore back on, upon successful install of kX. If this doesnt work for you, I dont know what's wrong. __________________ May a song always touch you in a positive way. Sonar 8 Producer Edition, Windows 7 Pro 64Bit, MOTU UltraLite MK3, 250 GB HDD 7200 rpm, 80 GB HDD 7200 rpm, Lite-On DVDRW LH 18A1P My Music Production: Top 40, Contemporary Christian, Pop/Rock, Decent Rap, Inspirationals, and Children Songs Last edited by thomasabarnes; Aug 22, 2005 at 12:20 AM.

Aug 19, 2005, 10:34 PM	#3
MicroSonic DriverHeaven Newbie Join Date: Aug 2005 Posts: 4 Rep Power: 0	I don't get any sound loading Soundfonts in kxMixer & in Sonar. The SB card is SB0100. Driver is 3537. OS is XP. DSP using kxdefault.kx. I tried to reinstall kx project. When rebooting the computer I got an errormsg: Error loading driver - please de install (the msg was in danish - so this is probably a poor translation). Then I tried to install in protected mode as suggested on website, but system got cold and died installing kxasio.dll... Tried the same in normal mode. Everything seems ok for 2 minutes. Audio (softsynths) and midi playing together. kx Wave SB1020 [ffe0] 6/7 was suddenly alive. Then the computer froze. Had to turn it off and now I'm back to uart as the only thing playing anything (only external synths). No audio at all - not even the speaker test.

Aug 19, 2005, 11:15 PM	#4
MicroSonic DriverHeaven Newbie Join Date: Aug 2005 Posts: 4 Rep Power: 0	I tried to reinstall drivers again and I got two minutes more where I could listen to both midi and audio. Then the system hung up....