No nVidia Control Panel ?

edperks · Mar 12, 2003, 10:50 PM

I just removed the leadtek drivers and Installed 41.09 from Nvidia Website And now there are no setting for the card under Display Properties. Has anybody had this problem before I would like to be able to turn Ansio and stuff up but they are not thier. The games seem to run fine though.

Leadtek Ti4200 A250 TO TD

WyreTheWolf · Mar 13, 2003, 09:01 AM

The 41.09 drivers indeed have a control panel.

The previous drivers if they are not completely uninstalled, there will be incompatabilities with the control panels, and the control panel will not install correctly.

I have run into this a few times.

Good luck!

BWX · Mar 13, 2003, 10:46 AM

Quote:

Originally posted by edperks
I just removed the leadtek drivers and Installed 41.09 from Nvidia Website And now there are no setting for the card under Display Properties. Has anybody had this problem before I would like to be able to turn Ansio and stuff up but they are not thier. The games seem to run fine though.

Leadtek Ti4200 A250 TO TD

Go to guru3d.com/downloads/video card drivers/Nvidia detonator drivers/ and then download the 30.xx to 40.xx fix. Also get the Nvidia file remover program.
Uninstall your video card drivers through control panel/ add remove programs.

Then when you reboot, press cancel when it asks you to install the video card.

Go to your C: drive and delete the Nvidia folder.

Type regedit in your "run" box

goto Hkey_local_machine/software/nvidia corperation and delete the Nvidia corperation key just to be safe

goto Hkey_current_user/software/nvidia corperation and delete that key as well

Run the 30.xx to 40.xx fix.

Then run NFR and delete all the nvidia files in there.

then install the new drivers.

If the driver you download does not have a setup file in the file you unzip, just go to your device manager and select display adapter and choose update driver. then choose select "install from a list or specific location" then choose "don't search" then "have file" and browse to your file you unzipped the driver to and it will recognize the .inf file and install the driver.

After you go through this once, changing drivers is pretty much just going to add/remove programs and uninstalling it, rebooting, and installing the new one.

This works for me every time. (I don't use the 30 to 40 fix because I don't use the 30.xx drivers.

I have changed drivers up to 8 times in one day to compare them, and this always works.

I only suggest the 30.xx to 40.xx fix becuase I don't know what else has been on your machine and if you don't re-install any 30.xx drivers you won't ever have to run that again.

I always run NFR after a new detonater instalation to make sure there are no left over old driver files in there older than my new ones. (NFR will show you all the driver files installed without deleting them- it just displays them all and gives you the option to delete them, but you don't have to- so don't be afraid to run the program after you install your new drivers)

Good luck.

edperks · Mar 13, 2003, 02:55 PM

Thanks When I get home from work this eve I will give it a try and let you know.

Thanks Again!

Ed

edperks · Mar 14, 2003, 12:22 AM

BWX232 I got it working it didnt work exactly like you said but with a few minor changes I got my control panel back. Thanks for your help and getting me on the right track.

Thanks Again

Ed

BWX · Mar 14, 2003, 03:24 AM

Wow, I actually helped someone!! Yay!! - J/K-

That's what DH is all about right?

Yeah, I didn' t go look to make sure those steps were exact- I was just writing the steps down from memory. but as long as you got the jist and it works that's cool.

edperks · Mar 14, 2003, 05:00 AM

It worked on the third pass with minor changes thanks again you were most helpfull.

WyreTheWolf · Mar 14, 2003, 05:54 AM

Quote:

Originally posted by BWX232
Wow, I actually helped someone!! Yay!! - J/K- That's what DH is all about right?

Yeah, I didn' t go look to make sure those steps were exact- I was just writing the steps down from memory. but as long as you got the jist and it works that's cool.

THAT is exactly what DH is all about

I like seeing this.. Members helping others.

Makes my fur stand on end

BWX · Mar 14, 2003, 01:03 PM

Quote:

Originally posted by WyreTheWolf
Makes my fur stand on end

LOL, fur, lol.

WyreTheWolf · Mar 14, 2003, 01:14 PM

Quote:

Originally posted by BWX232
LOL, fur, lol.

One day you will realize that it is ALL about the FUR

Mar 12, 2003, 10:50 PM	#1
edperks HardwareHeaven Senior Member Join Date: May 2002 Location: Southern Illinois Posts: 780 Rep Power: 0 System Specs	No nVidia Control Panel ? I just removed the leadtek drivers and Installed 41.09 from Nvidia Website And now there are no setting for the card under Display Properties. Has anybody had this problem before I would like to be able to turn Ansio and stuff up but they are not thier. The games seem to run fine though. Leadtek Ti4200 A250 TO TD

Mar 13, 2003, 09:01 AM	#2
WyreTheWolf Wolfish Bastard Join Date: May 2002 Location: Cave; Ozark Mountains Posts: 2,110 Rep Power: 0	The 41.09 drivers indeed have a control panel. The previous drivers if they are not completely uninstalled, there will be incompatabilities with the control panels, and the control panel will not install correctly. I have run into this a few times. Good luck!

Mar 13, 2003, 02:55 PM	Thread Starter #4
edperks HardwareHeaven Senior Member Join Date: May 2002 Location: Southern Illinois Posts: 780 Rep Power: 0 System Specs	Thanks When I get home from work this eve I will give it a try and let you know. Thanks Again! Ed

Mar 14, 2003, 12:22 AM	Thread Starter #5
edperks HardwareHeaven Senior Member Join Date: May 2002 Location: Southern Illinois Posts: 780 Rep Power: 0 System Specs	BWX232 I got it working it didnt work exactly like you said but with a few minor changes I got my control panel back. Thanks for your help and getting me on the right track. Thanks Again Ed

Mar 14, 2003, 03:24 AM	#6
BWX unplugged Join Date: Nov 2002 Location: USNY Posts: 19,669 Rep Power: 110 System Specs	Wow, I actually helped someone!! Yay!! - J/K- That's what DH is all about right? Yeah, I didn' t go look to make sure those steps were exact- I was just writing the steps down from memory. but as long as you got the jist and it works that's cool.

Mar 14, 2003, 05:00 AM	Thread Starter #7
edperks HardwareHeaven Senior Member Join Date: May 2002 Location: Southern Illinois Posts: 780 Rep Power: 0 System Specs	It worked on the third pass with minor changes thanks again you were most helpfull.