|
|||||||
| Windows XP & Linux NVIDIA Display Drivers If you have a problem with the NVIDIA ForceWare Drivers on XP or Linux then this is the place to get help! |
![]() |
|
|
Thread Tools |
|
|
#1 |
|
DriverHeaven Lover
Join Date: Oct 2003
Location: Dothan, Alabama USA
Posts: 224
Rep Power: 0 ![]() |
Un-installing Omega 1.5303 drivers
I tried out the new 1.5303 drivers on one of my games DungeonSiege and ran into some problems, first graphic quality was 1st rate and fps were very good. In one porsion of the game there was lots of things going on and when you paned around frames got jerky, fps did not fall off. When you would climb stairs or hill sides the senery would roll or jerk. I tried removing the drivers by going to add/remove and removed the Omega display software (no drivers were listed), then booted into safe mode, usually windows would detect new hardware installed, this time it did not, i went to hardware and the Omega drivers were still listed with an astric. I ran driver cleaner3 and cab cleaner, then rebooted. Still windows did not detect new hardware, i then went to hardware and removed the video adapter. I then rebooted and again it still did not detect new hardware installed, i unzipped my PNY FX Verto 5303 drivers and went to hardware, device manager, display adapter and update drivers, the Omega drivers were still there and windows tried to install them, i selected the PNY drivers and installed them. All seams to be working ok, went back to the game where i was having problems with the Omega drivers and all graphics were smooth no rolling or jerking. I am just consearned the there might be a driver conflict since i could not fully remove the Omega drivers
__________________
AMD Athlon XP3000+ Biostar nForce2 M7NCG 400 Windows XP Home Edition SP3 Albatron 6800GT 256mb 2x1gb G.Skill NS 400DDR in DC Creative X-Fi Xtreme Gamer WD 100Gb 7200 HD Samsung 16x/48x DVD Drive Samsung 40x/12x/40x CDRW Drive ENlight 420 Watt PSU |
|
|
|
|
|
#2 |
|
DriverHeaven Junior Member
Join Date: May 2004
Location: New Zealand
Posts: 39
Rep Power: 0 ![]() |
Even though Omegadrive says to install his driver over the top, this only really applies if your installing a similar driver (from another 5x.xx)
The 4x.xx installer/uninstaller works differently to the 5x.xx and problems can occur like yours. In my opinion unistall drivers first. Pieter
__________________
Gateway Solo 9550 512MB RAM 32MB Geforce 2go WinXP pro, SP1 http://www.laptopvideo2go.com
Last edited by mobilenvidia; May 9, 2004 at 08:27 AM. |
|
|
|
![]() |
| Thread Tools | |
|
|