MIG-31

By rewt at nvnews.

Since so many of you like my Coolbits tweak I decided to continue my work further. Coolbits 2 adds additional support for mobile systems, enables the Direct3d and OpenGL configuration tabs, and even more tweaking capability from the nVidia taskbar settings panel. Hope you all enjoy.

This tweak is intended for use with GeForce cards and forceware 55.xx - 6x.xx drivers. It gives many extra options to the control panel/driver, including but not limited to - overclocking, agp & hardware settings, fan control, troubleshooting dialog, and openGL 2.0 support!

*NOTE: Coolbits 2 is not fully compatible with driver versions older than 55.xx. If you do happen to run this tweak with drivers older than 55.xx you will more than likely get errors at startup! To enable full compatibility, you must disable the options that are causing issues with your current setup.

Second, open up notepad (Start > Run > notepad.exe) and paste the contents of the clipboard. Third, save as coolbits2.reg [NOT coolbits2.reg.txt!, be sure you don't add the .txt extension by selecting Save as type - 'All files'] After its saved, then you can simply double click the icon of the .reg file and windows will ask to put it in the registry. Click 'yes' and/or 'ok'

The best part about installing coolbits is that you don't have to reboot to get the extra options. Well now, I guess there's a first for everything isn't there?

To get to these options simply right-click on your desktop and go to 'NVIDIA Analog Display' (Win XP/2003). For Win 2000 and lower you may need to get to the Nvidia Control Panel the old way. Right click desktop > Properties > Settings > Advanced > GeForce.


Source: NVnews Forums

__________________

refraction

to save people some time

coolbits2.reg

i havent tested it, so dont guarentee it working

MIG-31

im using it now. went perfectly fine and only took 2 minuites to make the reg file.

i were going to host this myself but im having problems with mine.thanks for hosting it.

__________________

Driver 7

Ya I have installed also and everythings cool with it so far. Game still plays good.

It add's a few options. Nothing spectacular but It's nice haveing as many options as possible.

__________________

[COLOR=Black]Asus A8N Deluxe SLI, AMD64 4200 X2 Dual Core, 2x 6800's, Corsair TwinX PC4000 DDR500, Yamaha F1 cdrw, Soundblaster Audigy 2, 2 SATA 120 gig Maxtor HD's, Raid 0 array, Altec Lancing 5.1 Surround Speakers, Thermaltake Xaser III Case, Stealth 470w Power supply, 21.3" Samsung widescreen, MX1000 Lazer mouse.[/COLOR]

MIG-31

as you can see all the usual hacks are in place.

such as clock frequancies,d3d extra options etc.

__________________

Hkhalid

First:
I'd like to know how to remove this registry entry if u dont like it

Second:
The overclocking options we get after installing coolbits2.....those have been fine to work with? There is an auto-detect option which is safe to use?

__________________
Pentium 4 2.80Ghz "Prescott"
ASUS P4P800 Deluxe
ASUS Radeon 9800 XT
SB Audigy2 - Pioneer 5:1 Surround
1 GB PC 4000 Kingston RAM
120 GB Seagate Baraccuda
ASUS DVD/CD-RW
Compaq P-1100 Trinitron Monitor

MIG-31

A)to remove just uninstall drivers then re-install.but i think there used to be a code for the first coolbits to remove.does not alter games so there is no need to remove.

B)works just like coolbits one.i have only overclocked my card a little and is still stable.

also gives you access to more d3d to select a max fps of your choice.

BUT I DO STRESS THIS IS USE AT YOUR OWN RISK

__________________

Hkhalid

Okay thanks

__________________
Pentium 4 2.80Ghz "Prescott"
ASUS P4P800 Deluxe
ASUS Radeon 9800 XT
SB Audigy2 - Pioneer 5:1 Surround
1 GB PC 4000 Kingston RAM
120 GB Seagate Baraccuda
ASUS DVD/CD-RW
Compaq P-1100 Trinitron Monitor

tychop

My setting don't get applied .....
After pressing OK & opening the window again, it has jumped back to 350MHz (GT)

Has neone solved this already?

MIG-31

did you tick.. apply these settings at startup.

__________________

tychop

Yep, tried that.

But even without rebooting (so, after pressing OK) it gives me the default values .....
So, it looks like the OK doesn't store the settings.
I've detected 421MHz & 1,14GHz, and am trying to set that.

(now that I think of it, I'll try a lower setting just to see if those values can be stored.)

eraser2224

I had a similar problem with the clock speeds reverting back to default after using the "detect optimal frequencies" button. I just used the detect optimal freqs then I closed it, went back in, went to manual overclock and set it to the freqs it told me on my own. After that the values stuck. Hope this helps.

edfx21

Max pci mem Limit Need to be removed on 6176 drivers !

--------------------------------------------------------------------------------

I have latest 6176 forceware drivers installed. It seams that these drivers limit you to set Max pci mem Limit exactly to half size of system ram installed . Now that would make sence if you only have 512 ram then you would need at least 200+ to run win XP stable. But for peple that have more that 1G of ram and playing mem hungry games like Planetside and upcomming Doom3 its just not efficient . . And in big way.
I have 1536 mb on board and it only lets me set it to 767 max . Now i only need about 256 max to Run win XP so my other 512 doesent realy get used by the game. In older Detonator drivers 53.03 and using RivaTuner you could set that value to more than half. I actualy so Planetside eatup 950+ of my ram while plaing intence battles. But not with these driver it stays exactly at 767mb limit and you cant change that. This just frkn anoys me



Quote:
Does Anyone knows how to change your max pci mem Limit to more than a half of ram you have? Maiby registry hack or some other way. ITs funny but i cant realy go back to 53.03 couse my system rejects them. I would, couse i was getting much smoother play > with limit set to 1.1 G

__________________
P4 2.8a at 4.0 max 3.8 stable
Abit IC7 MB
1.5 G of Kingmax PC4000
560w Truepower PSU
1 SATA WD Raptor
Nvidia GF2U clocked at 300/500
NB FAN
JET4 MAX Fan
Open PC case with 12000btu AC 3 feet away
32C idle 45C load CPU temps
12C system temp.

don'tknowmuch

Works great on my '98 rig, thanks for the heads up

Azetab

Can I use Coolbits 2 with the Omega Drivers 1.5672? Will it cause any problems or overwrite any tweaks?

G@MeBoY

@edfx21:
PCI memory setting do not have any effect, dont bother with them at all.

__________________
-= G@MeBoY =-
::Full color with 3DNOW! tech::
XP2000+ thoroughbred @ 10x230FSB - watter cooled by home made sistem - EpoX RDA3I - ASUS V9950SE/Td @470/820 - 2x256 DDR400 V-Data - !Live Player - 80GB Maxtor DiamondMax9+7200rpm - Tagan TG-380 black PSU - chieftek Matrix case -
WinXP SP1

MIG-31

should be able to..... did not affect anything that i noticed.all it does is open up the overclocking features hidden in the drivers,and a few d3d frame rate and v-sync options.

__________________

ColdPenguin

I overclock my GeForceFX 5900 128mb non-ultra to 466/982 by using coolbits by manually adding the DWORD 'coolbits' under the NVTweak folder in the registry and setting its value to 3. Does this do anything different than that? Also my memory wont stick sometimes. After rebooting my computer sometimes it will stay at 982 sometimes it will switch back to the 850 default for no apprent reason, would this fix that problem?

Chaos

you should be fine using coolbits

__________________

Lopan_the_Gamer

My video memory clock frequency keeps defaulting as well when I reboot my system. It does'nt do it all the time but it happens quite often. Does anyone know how to keep it from defaulting. I am using Coolbits not Coolbits 2. I only added that Coolbits file with the value of 3 to my registry.

mobilenvidia

TRy setting 'coolbits' to '0xffffffff' this apparently has some affect with over clocking.

Hope this helps,


Pieter.

__________________
Gateway Solo 9550
512MB RAM
32MB Geforce 2go
WinXP pro, SP1

http://www.laptopvideo2go.com

sillydanny

great!!!
thanks your share!

ericdrum

So it's been about a year since I've had an nVidia card. I just ordered my 6800GT and cannot wait. Is coolbits still the most popular way of OC'ing your video card? I've kind of evolved into loving my ati tool and want a way to turn on OC'ing when I'm going to game and leave it at standard speeds when not.

__________________
AMD Athlon 64 3500+
MSI K8N Neo2 Platinum nForce3 Ultra
2 gig Corsair XMS 3200
eVGA 6800 GT
SB Audigy2 w/ KX Project Drivers
2-80 gig Western Digital SATA 7200 RAID 0
200 GB Seagate Barricuda 7200 for Storage
Ultra Xconnect 500W Power Supply
Windows XP SP2
Antec P160W case

Azetab

Hey ericdrum, we use Coolbits 3D(Coolbits 3) to REVEAL hidden settings in the nVIDIA control panel now. What we now use for overclocking is Rivatuner(just do a search anywhere), and Powerstrip. You can use both of these tools as they are both very useful.

danked

so do i even need this if im allready using omega 6177 ?
will it add anything i dont have ./.

danked

yep