Radeon Omega Drivers 3.8.291 (Cat 6.9)

Omegadrive · Oct 7, 2006, 05:06 PM

What's New in Omega Drivers?
v3.8.291
[*] Based on the Catalyst 6.9 Official drivers.
[*] Soft mods are now supplied by Tech Power Up.
[*] Updated to Multires 1.58

Known Issues:
1) From Cat 6.6 and up ATI removed driver-level support for the following series of cards (including Mobility models): 7000, 7200, 7500, 8500, 9000, 9200, 9250. Since the Omega Drivers use ATI drivers as a base, that means they will also not include support for these chipsets, they may install, but the PC may give you a BSOD or a black screen upon boot.

What's new for ATI Tray Tools?
1.2.6.930
[+] Added configuration dialog for Overdrive 3. You can use it if you don't want to overclock your board on low level or if you have a problem with low level overclocking. Remember this option will be active only if your video board support Overdrive version 3 and ATI HotKey poller service is started.
[+] Added overclocking support for X1300/X1600/X1800/X1900. Memory overclocking for X1300 doesn't work in this release. Also remember that you must disable ATI HotKey poller if your board can operate in 2D/3D mode or your clocks always will be resets to ATI default clocks. Try do not overclock your board while any 3D games are active. Do it before launching game via game profiles it is a safest way.
[*] Updated color correction hotkeys, to support new color correction formula
[*] Updated 3D renderer and benchmark module.
[F] Fixed situation when 3D renderer shows artifacts after using benchmark module.
[+] Added support for Avivo Colors correction. Hue/Saturation will only work on R5xx video boards. There are no way to activate them for old video board, so do not ask me about it.
[*] Updated auto FAN control functionality for R5xx boards.
[*] Updated system information module. Added basic information about Overdrive support.
[F] Fixed broken OSD functionality for Direct3D8 games and applications.
[F] Fixed detection of current 3D profile with no GI option included
[*] Now Shared memory information about FreeVideo and Texture memory will be updated only if 3D game or application is active and OSD enabled.
[*] Updated FlashOSD module. Added voltages information for X1xxx video boards and ASUS Video boards with FinTEK sensor (like 9600XT/9800XT)
[F] Fixed rendering procedure in FlashOSD module for some of non-alpabetical characters.
[F] Fixed bug when "Scale image to panel size" option doesn't work in certain situations.
[+] Updated support for HDTV modes. Added a few new modes. Only supported modes can be adjusted. Note some modes can be disabled in certain situation, such as display rotation
[+] Added support for "Preserve Aspect Ratio" option in Display module. If supported by LCD or DFP display.
[F] Fixed bug with hotkey for decreasing contrast in color correction procedure.
[+] Added GPU and Memory Voltage control procedure for X1600/X1800/X19xx (if supported by hardware)
[*] Monitoring Graphs window now will be automatically reopened after suspend mode if it was active before entering into Suspend mode.
[+] Added option to Force TV Detection.If you are using an older TV or one that has non-standard inputs that may not be automatically detected, use Force TV Detection.
[+] Added test support for X1300/X1600/X1800/X19xx Radeon video boards into TV Out/Display module.
[*] Improved TV Out support for mobility chips. ATT has partial support for mobility chips, so do not expect a lot

[*] Updated Core names database. Added information about RV570/RV535 chips.
[+] Added option to automatically shutdown "ATI HotKey Poller" for R5xx board. If you want to use overclocking functions in ATI Tray Tools for those video boards, you must always disable "ATI HotKey Poller" service to prevent from resetting clocks and voltages to default state.
[F] Fixed FlashOSD functionality corrected wrongly shown GPU/Memory speed for R5xx video board in 3D mode.
[+] Added localization support. Big thanks to all who helped to translate ATI Tray Tools into other languages.
[+] Added new command line parameters:
/LDSD - Load "Default Single Display" profile
/EXD - Turn Extended Desktop On/Off
[+] Added an ability to skip overclocking at start up. Just press left CTRL button while windows is loading.

Download on my site as usual and remember to get the WDM drivers from bottom of the download page if you have a VIVO capable card.

Enjoy!

Aurahead · Oct 7, 2006, 06:43 PM

Nice Omega

I will try this baby out ^^

Rumble · Oct 7, 2006, 06:47 PM

3dacc.net mirror http://www.3dacc.net/page.php?id=3302

magicius · Oct 7, 2006, 06:50 PM

i dowloaded them but i have problem help please.

Aurahead · Oct 7, 2006, 07:17 PM

Sems to work fine with install. Time to do some bench test.

Hmm... I disable ATI Poller and overclock on ATI Tray Tools, it sems to work for awhile. But it set default automatic, any ide why?

Pluvious · Oct 7, 2006, 07:20 PM

Same problem here Magicius.. maybe a corrupt download?.. got them from Omega's site.. will try another DL.

Aurahead · Oct 7, 2006, 07:25 PM

Try site that Rumble gave. it work fine.

Ib Al-Musaheb · Oct 7, 2006, 08:13 PM

Weeeee!

Thanks, Omega! Gonna try out now!

Pluvious · Oct 7, 2006, 08:31 PM

Quote:

Originally Posted by Aurahead

Try site that Rumble gave. it work fine.

nope..

This file doesn't belong to the site you came from.
Please e-mail the webmaster of that site and tell him:
NOT TO LEECH OTHER SITES LINKS!!
This link belongs to www.3dacc.net so visit us instead.

Dyre Straits · Oct 7, 2006, 08:42 PM

You can go directly to NGOHQ's Files for Omegadrivers here:

http://www.ngohq.com/home.php?page=F...&dwn_cat_id=14

Pluvious · Oct 7, 2006, 09:25 PM

WTF?.. i'm still getting that zip error (screenshot above). Sigh..

Aurahead · Oct 7, 2006, 09:38 PM

Anyone know why I get problem wot overclock when I disable ATI Poll?
Its freeze when I overclock. But when I have ATI Poll enable it goes fine to overclock. But ATI Poll reset to 2D clock right?

Iam using ATI Overdrive 3, working fine but I think I get better result with Overclocking Settings.

Omegadrive · Oct 8, 2006, 02:50 AM

Guys, try downloading from any of the other mirrors, the site is being hammered, sorry.

Aurahead · Oct 8, 2006, 02:56 AM

Omega, do you know why ATI HotKey Poller are wierd to me? When I disable it I have trouble to overclock, I can do that sometimes and awhile it hang ut system. But I get great bench. But when I have enable I overclock but it reset to default because ATI Poller are enable. But overclock fine, but I dont get as good bench as disable ATI Poller. Iam using Overdrive 3 right now. it says 500/600 and request on the mhz I request do it turn to that when I play game? like 700/800? Sorry for my bad english.

lpzml · Oct 8, 2006, 03:13 AM

good job Omega hey do i need to install cat 6.9 after for crossfire to work still thanks

kgb · Oct 8, 2006, 03:47 AM

As the offical 6.9's do not have the Agp x1650 supported yet (wouldn't let me install)
Did you by chance add support for this card? Just thought I'd check

Thanks

Omegadrive · Oct 8, 2006, 06:22 AM

Quote:

Originally Posted by kgb

As the offical 6.9's do not have the Agp x1650 supported yet (wouldn't let me install)
Did you by chance add support for this card? Just thought I'd check

Thanks

Nope, sorry, I need the device ID in order to add support, if u can send it over I can add support for next release.

Quote:

Originally Posted by Aurahead

Omega, do you know why ATI HotKey Poller are wierd to me? When I disable it I have trouble to overclock, I can do that sometimes and awhile it hang ut system. But I get great bench. But when I have enable I overclock but it reset to default because ATI Poller are enable. But overclock fine, but I dont get as good bench as disable ATI Poller. Iam using Overdrive 3 right now. it says 500/600 and request on the mhz I request do it turn to that when I play game? like 700/800? Sorry for my bad english.

No idea, I always have it disabled cause I manually OC my card in BIOS and that thing kept resetting my speed values when entering games. Actually, I still have that problem and haven't found a solution, even with all the ATI stuff disabled and the speed set in bios (648/801), sometimes the card resets to the factory values (500/600), really weird.

JCOTV64 · Oct 8, 2006, 06:25 AM

how about performance?, it's like the official that were not so good?

kgb · Oct 8, 2006, 06:38 AM

Thanks for the reply and support Omega, here is the infomation for the card. If you will need to know anything else about this card, let me know.

Thanks again

Display adapter ATI display adapter AGP (0x71C6)
Core Name RV530
SubVendor HIS (17AF)
SubDevice 216A
BUS 1
Device 0
Function 0
Base Address 0 D000000C
Base Address 1 00000000
Base Address 2 FE8F0004
Base Address 3 00000000

Bus Type AGP
Current AGP Speed 8x
SMARTGART Installed Yes

Driver Version 06.8
Release Version 8.282.1-060802a-035868C-ATI
QuadBuffer Stereo Support No
Catalyst Registry Path
System\CurrentControlSet\Control\Video\{13DA8F5F-EE8F-4DB8-B716-BAFC04FBDF7B}\0000

______________________________
Clock Information
BIOS VPU 600.00
Current VPU 599.40
BIOS MEM 400.00
Current MEM 450.00

______________________________
Overdrive
Supported No

Aurahead · Oct 8, 2006, 08:31 AM

Hmm... I have been testing Overdrive3 and I have to say, its kinda cool and easy to use.
Iam waiting for my new Board and Memory for my E6600. But with this rigg I have now, with last Omega I manage to score with 3D Mark05 - 13173. But with these new Omega 3DMark05 - 13363. So there is a bit better

Will try on games and se if its better. And hopefully next week with new board and memory.

~~bobbytomorow~~ · Oct 8, 2006, 08:42 AM

I keep getting the "detect new hardware wizard" on start-up and my card is not recognized in device manager. Any idea how to fix this?

Dyre Straits · Oct 8, 2006, 09:09 AM

Quote:

Originally Posted by bobbytomorow

I keep getting the "detect new hardware wizard" on start-up and my card is not recognized in device manager. Any idea how to fix this?

If I was having this problem, I'd boot into Safemode and do a manual Update Drivers there.

Aurahead · Oct 8, 2006, 09:36 AM

bobytomorow go to Omegadriver site and download
[COLOR=#99FFFF][COLOR=#ff0000]LATEST WDM DRIVERS, NEEDED FOR VIVO AND AIW CARDS: (3.99MB)[/COLOR][/COLOR]
[COLOR=#99FFFF][COLOR=black]it will fix it. I have that problem everytime I install new OmgeDriver because if you have VIVO card I think you need that update to.[/COLOR][/COLOR]
[COLOR=#99FFFF][COLOR=#000000][/COLOR][/COLOR]
[COLOR=#99FFFF][COLOR=#000000]I get some improve performance on Cs: Source and HL2: Lost Coast.[/COLOR][/COLOR]
[COLOR=#99FFFF][COLOR=#000000]HL2 Lost Coast: Before 95fps now 137fps with some tweaks and everything on high with HDR on 1280x1024.[/COLOR][/COLOR]
[COLOR=#99FFFF][COLOR=#000000]Source before I had 254fps on fps_max 300 and now 291fps on fps_max 300 everything on high and max everything on 1024x768[/COLOR][/COLOR]

~~bobbytomorow~~ · Oct 8, 2006, 10:02 AM

Quote:

Originally Posted by Aurahead

bobytomorow go to Omegadriver site and download
[COLOR=#99ffff][COLOR=#ff0000]LATEST WDM DRIVERS, NEEDED FOR VIVO AND AIW CARDS: (3.99MB)[/COLOR][/COLOR]
[COLOR=#99ffff][COLOR=black]it will fix it. I have that problem everytime I install new OmgeDriver because if you have VIVO card I think you need that update to.[/COLOR][/COLOR]

[COLOR=#99ffff][COLOR=#000000]I get some improve performance on Cs: Source and HL2: Lost Coast.[/COLOR][/COLOR]
[COLOR=#99ffff][COLOR=#000000]HL2 Lost Coast: Before 95fps now 137fps with some tweaks and everything on high with HDR on 1280x1024.[/COLOR][/COLOR]
[COLOR=#99ffff][COLOR=#000000]Source before I had 254fps on fps_max 300 and now 291fps on fps_max 300 everything on high and max everything on 1024x768[/COLOR][/COLOR]

Yup, that did her, cheers mate. And thanks for the quick response Dyre. Awesome, I'll play around with em now ;D

ree · Oct 8, 2006, 10:09 AM

this version support 9800se soft mod?

RoyBatty · Oct 8, 2006, 10:23 AM

ATT says Driver version: Omega 6.08, is this correct? I think it should be 6.09

Omegadrive · Oct 8, 2006, 02:18 PM

Quote:

Originally Posted by RoyBatty

ATT says Driver version: Omega 6.08, is this correct? I think it should be 6.09

Is a typo, see the readme.

DH Geeks · Oct 8, 2006, 05:31 PM

I just want to let Omegadrive know that the driver file downloaded from [COLOR=#800080]Treiber-koenig.de[/COLOR] is not extractable.

Download Link : http://www.treiber-koenig.de/request.php?283

The file size is definitely smaller than the ones from other mirrors. Could you please let Treiber-Koenig.de know this problem and replace the driver file with the right size?

Thanks in advance.

PrEzEs · Oct 8, 2006, 06:53 PM

Do they work on X1950 ?
Because I can't install them - Says 'Error INF' can't find display device

I installed cat's 6.10 beta without problems , but I wish I could use Omega's ...

My device :
Sapphire Radeon X1950 XTX 512MB

device id :
Primary :
PCI\VEN_1002&DEV_7240&SUBSYS_0B121002&REV_00\5&31F 3E1F0&0&0008

Secondary :
PCI\VEN_1002&DEV_7260&SUBSYS_0B131002&REV_00\4&31F 3E1F0&0&0108

Hope this helps add my device to the list...

Pluvious · Oct 8, 2006, 07:26 PM

I have yet to find a site that has a version that I can even OPEN..let alone install them.

EDIT:..ok I redownloaded them from the first site on Omegas list.. worked that time.

Whew..

Oct 7, 2006, 05:06 PM	#1
Omegadrive Drivers? What Drivers??? Join Date: May 2002 Location: Puerto Rico Posts: 1,526 Rep Power: 73	Radeon Omega Drivers 3.8.291 (Cat 6.9) What's New in Omega Drivers? v3.8.291 [] Based on the Catalyst 6.9 Official drivers. [] Soft mods are now supplied by Tech Power Up. [] Updated to Multires 1.58 Known Issues: 1) From Cat 6.6 and up ATI removed driver-level support for the following series of cards (including Mobility models): 7000, 7200, 7500, 8500, 9000, 9200, 9250. Since the Omega Drivers use ATI drivers as a base, that means they will also not include support for these chipsets, they may install, but the PC may give you a BSOD or a black screen upon boot. What's new for ATI Tray Tools? 1.2.6.930 [+] Added configuration dialog for Overdrive 3. You can use it if you don't want to overclock your board on low level or if you have a problem with low level overclocking. Remember this option will be active only if your video board support Overdrive version 3 and ATI HotKey poller service is started. [+] Added overclocking support for X1300/X1600/X1800/X1900. Memory overclocking for X1300 doesn't work in this release. Also remember that you must disable ATI HotKey poller if your board can operate in 2D/3D mode or your clocks always will be resets to ATI default clocks. Try do not overclock your board while any 3D games are active. Do it before launching game via game profiles it is a safest way. [] Updated color correction hotkeys, to support new color correction formula [] Updated 3D renderer and benchmark module. [F] Fixed situation when 3D renderer shows artifacts after using benchmark module. [+] Added support for Avivo Colors correction. Hue/Saturation will only work on R5xx video boards. There are no way to activate them for old video board, so do not ask me about it. [] Updated auto FAN control functionality for R5xx boards. [] Updated system information module. Added basic information about Overdrive support. [F] Fixed broken OSD functionality for Direct3D8 games and applications. [F] Fixed detection of current 3D profile with no GI option included [] Now Shared memory information about FreeVideo and Texture memory will be updated only if 3D game or application is active and OSD enabled. [] Updated FlashOSD module. Added voltages information for X1xxx video boards and ASUS Video boards with FinTEK sensor (like 9600XT/9800XT) [F] Fixed rendering procedure in FlashOSD module for some of non-alpabetical characters. [F] Fixed bug when "Scale image to panel size" option doesn't work in certain situations. [+] Updated support for HDTV modes. Added a few new modes. Only supported modes can be adjusted. Note some modes can be disabled in certain situation, such as display rotation [+] Added support for "Preserve Aspect Ratio" option in Display module. If supported by LCD or DFP display. [F] Fixed bug with hotkey for decreasing contrast in color correction procedure. [+] Added GPU and Memory Voltage control procedure for X1600/X1800/X19xx (if supported by hardware) [] Monitoring Graphs window now will be automatically reopened after suspend mode if it was active before entering into Suspend mode. [+] Added option to Force TV Detection.If you are using an older TV or one that has non-standard inputs that may not be automatically detected, use Force TV Detection. [+] Added test support for X1300/X1600/X1800/X19xx Radeon video boards into TV Out/Display module. [] Improved TV Out support for mobility chips. ATT has partial support for mobility chips, so do not expect a lot [] Updated Core names database. Added information about RV570/RV535 chips. [+] Added option to automatically shutdown "ATI HotKey Poller" for R5xx board. If you want to use overclocking functions in ATI Tray Tools for those video boards, you must always disable "ATI HotKey Poller" service to prevent from resetting clocks and voltages to default state. [F] Fixed FlashOSD functionality corrected wrongly shown GPU/Memory speed for R5xx video board in 3D mode. [+] Added localization support. Big thanks to all who helped to translate ATI Tray Tools into other languages. [+] Added new command line parameters: /LDSD - Load "Default Single Display" profile /EXD - Turn Extended Desktop On/Off [+] Added an ability to skip overclocking at start up. Just press left CTRL button while windows is loading. Download on my site as usual and remember to get the WDM drivers from bottom of the download page if you have a VIVO capable card. Enjoy! __________________ DRIVERHEAVEN ADMINISTRATOR <<E-MAIL>> <<PC SPECS>> GOD BLESS YOU ALL!

Oct 7, 2006, 06:43 PM	#2
Aurahead DriverHeaven Junior Member Join Date: Jul 2005 Location: Sweden Posts: 51 Rep Power: 0	Nice Omega I will try this baby out ^^ __________________ [COLOR=#455b64] [/COLOR]

Oct 7, 2006, 07:17 PM	#5
Aurahead DriverHeaven Junior Member Join Date: Jul 2005 Location: Sweden Posts: 51 Rep Power: 0	Sems to work fine with install. Time to do some bench test. Hmm... I disable ATI Poller and overclock on ATI Tray Tools, it sems to work for awhile. But it set default automatic, any ide why? __________________ [COLOR=#455b64] [/COLOR]

Oct 7, 2006, 07:20 PM	#6
Pluvious Elisha = hottie Join Date: Jul 2003 Location: USA CA. SF Bay Area Posts: 1,318 Rep Power: 56	Same problem here Magicius.. maybe a corrupt download?.. got them from Omega's site.. will try another DL. __________________

Oct 7, 2006, 07:25 PM	#7
Aurahead DriverHeaven Junior Member Join Date: Jul 2005 Location: Sweden Posts: 51 Rep Power: 0	Try site that Rumble gave. it work fine. __________________ [COLOR=#455b64] [/COLOR]

Oct 7, 2006, 06:47 PM	#3
Rumble DriverHeaven Junior Member Join Date: Jul 2004 Location: Athens Posts: 96 Rep Power: 0	3dacc.net mirror http://www.3dacc.net/page.php?id=3302

Oct 7, 2006, 06:50 PM	#4
magicius DriverHeaven Newbie Join Date: Sep 2006 Location: Belgrade,Serbia Posts: 9 Rep Power: 0	i dowloaded them but i have problem help please.

Oct 7, 2006, 08:13 PM	#8
Ib Al-Musaheb DriverHeaven Lover Join Date: Dec 2005 Posts: 190 Rep Power: 0 System Specs	Weeeee! Thanks, Omega! Gonna try out now! __________________

Oct 7, 2006, 09:25 PM	#11
Pluvious Elisha = hottie Join Date: Jul 2003 Location: USA CA. SF Bay Area Posts: 1,318 Rep Power: 56	WTF?.. i'm still getting that zip error (screenshot above). Sigh.. __________________

Oct 7, 2006, 09:38 PM	#12
Aurahead DriverHeaven Junior Member Join Date: Jul 2005 Location: Sweden Posts: 51 Rep Power: 0	Anyone know why I get problem wot overclock when I disable ATI Poll? Its freeze when I overclock. But when I have ATI Poll enable it goes fine to overclock. But ATI Poll reset to 2D clock right? Iam using ATI Overdrive 3, working fine but I think I get better result with Overclocking Settings. __________________ [COLOR=#455b64] [/COLOR] Last edited by Aurahead; Oct 7, 2006 at 10:03 PM.

Oct 8, 2006, 02:50 AM	Thread Starter #13
Omegadrive Drivers? What Drivers??? Join Date: May 2002 Location: Puerto Rico Posts: 1,526 Rep Power: 73	Guys, try downloading from any of the other mirrors, the site is being hammered, sorry. __________________ DRIVERHEAVEN ADMINISTRATOR <<E-MAIL>> <<PC SPECS>> GOD BLESS YOU ALL!

Oct 8, 2006, 02:56 AM	#14
Aurahead DriverHeaven Junior Member Join Date: Jul 2005 Location: Sweden Posts: 51 Rep Power: 0	Omega, do you know why ATI HotKey Poller are wierd to me? When I disable it I have trouble to overclock, I can do that sometimes and awhile it hang ut system. But I get great bench. But when I have enable I overclock but it reset to default because ATI Poller are enable. But overclock fine, but I dont get as good bench as disable ATI Poller. Iam using Overdrive 3 right now. it says 500/600 and request on the mhz I request do it turn to that when I play game? like 700/800? Sorry for my bad english. __________________ [COLOR=#455b64] [/COLOR]

Oct 8, 2006, 03:13 AM	#15
lpzml DriverHeaven Junior Member Join Date: Mar 2006 Posts: 57 Rep Power: 0	good job Omega hey do i need to install cat 6.9 after for crossfire to work still thanks __________________ Asus MVP Deluxe AMD X2 4400+ 2 Gb OGZ Ram Ati Crossfire Edition 1800xt 512 Sapphire 1800xt 512 Western Digital Cavier SE16 320gb Thermaltake Tide Water Plus Duel Crossfire Cooling System is running real cool. Running DH 6.5

Oct 8, 2006, 03:47 AM	#16
kgb DriverHeaven Newbie Join Date: Dec 2004 Location: Palm Harbor, FL Posts: 16 Rep Power: 0	As the offical 6.9's do not have the Agp x1650 supported yet (wouldn't let me install) Did you by chance add support for this card? Just thought I'd check Thanks __________________ I was Here

Oct 8, 2006, 06:25 AM	#18
JCOTV64 DriverHeaven Junior Member Join Date: Jul 2006 Posts: 75 Rep Power: 0	how about performance?, it's like the official that were not so good? __________________ [COLOR=Green]DFI DFI Lanparty nF4 Ultra-D (BIOS 29/03/2006) / AMD Opteron 146 / XP-120 + Delta Senflow /2x 512 Patriot Memory DC PC3200+XBLK / LCD 22" Gateway / HIS Radeon HD 3870 / SoundBlaster X-Fi Platinum Fatal1ty / WD 500 gb Sata2 / Seagate 320 gb Sata2 7200 rpm / WD 160 gb Sata 7200 rpm / WD 40 gb Pata 7200 rpm / Seagate 80 gb Pata 7200 / Super Multi DVD+RW LG / Light Scribe DVD+RW Lite-On / Raidmax Volcano 630 W / Thermaltake Armor VA8003BWS[/COLOR]

Oct 8, 2006, 06:38 AM	#19
kgb DriverHeaven Newbie Join Date: Dec 2004 Location: Palm Harbor, FL Posts: 16 Rep Power: 0	Thanks for the reply and support Omega, here is the infomation for the card. If you will need to know anything else about this card, let me know. Thanks again Display adapter ATI display adapter AGP (0x71C6) Core Name RV530 SubVendor HIS (17AF) SubDevice 216A BUS 1 Device 0 Function 0 Base Address 0 D000000C Base Address 1 00000000 Base Address 2 FE8F0004 Base Address 3 00000000 Bus Type AGP Current AGP Speed 8x SMARTGART Installed Yes Driver Version 06.8 Release Version 8.282.1-060802a-035868C-ATI QuadBuffer Stereo Support No Catalyst Registry Path System\CurrentControlSet\Control\Video\{13DA8F5F-EE8F-4DB8-B716-BAFC04FBDF7B}\0000 ______________________________ Clock Information BIOS VPU 600.00 Current VPU 599.40 BIOS MEM 400.00 Current MEM 450.00 ______________________________ Overdrive Supported No __________________ I was Here

Oct 8, 2006, 08:31 AM	#20
Aurahead DriverHeaven Junior Member Join Date: Jul 2005 Location: Sweden Posts: 51 Rep Power: 0	Hmm... I have been testing Overdrive3 and I have to say, its kinda cool and easy to use. Iam waiting for my new Board and Memory for my E6600. But with this rigg I have now, with last Omega I manage to score with 3D Mark05 - 13173. But with these new Omega 3DMark05 - 13363. So there is a bit better Will try on games and se if its better. And hopefully next week with new board and memory. __________________ [COLOR=#455b64] [/COLOR]

Oct 8, 2006, 08:42 AM	#21
~~bobbytomorow~~ Banned Join Date: Jan 2006 Location: vancouver Posts: 450 Rep Power: 0	I keep getting the "detect new hardware wizard" on start-up and my card is not recognized in device manager. Any idea how to fix this?

Oct 8, 2006, 09:36 AM	#23
Aurahead DriverHeaven Junior Member Join Date: Jul 2005 Location: Sweden Posts: 51 Rep Power: 0	bobytomorow go to Omegadriver site and download [COLOR=#99FFFF][COLOR=#ff0000]LATEST WDM DRIVERS, NEEDED FOR VIVO AND AIW CARDS: (3.99MB)[/COLOR][/COLOR] [COLOR=#99FFFF][COLOR=black]it will fix it. I have that problem everytime I install new OmgeDriver because if you have VIVO card I think you need that update to.[/COLOR][/COLOR] [COLOR=#99FFFF][COLOR=#000000][/COLOR][/COLOR] [COLOR=#99FFFF][COLOR=#000000]I get some improve performance on Cs: Source and HL2: Lost Coast.[/COLOR][/COLOR] [COLOR=#99FFFF][COLOR=#000000]HL2 Lost Coast: Before 95fps now 137fps with some tweaks and everything on high with HDR on 1280x1024.[/COLOR][/COLOR] [COLOR=#99FFFF][COLOR=#000000]Source before I had 254fps on fps_max 300 and now 291fps on fps_max 300 everything on high and max everything on 1024x768[/COLOR][/COLOR] __________________ [COLOR=#455b64] [/COLOR]

Oct 8, 2006, 10:09 AM	#25
ree DriverHeaven Junior Member Join Date: Sep 2003 Posts: 67 Rep Power: 0	this version support 9800se soft mod?

Oct 8, 2006, 10:23 AM	#26
RoyBatty HardwareHeaven Senior Member Join Date: Jun 2006 Location: Czech Republic Posts: 1,930 Rep Power: 115 System Specs	ATT says Driver version: Omega 6.08, is this correct? I think it should be 6.09

Oct 8, 2006, 05:31 PM	#28
DH Geeks DriverHeaven Junior Member Join Date: Jul 2004 Posts: 69 Rep Power: 0	I just want to let Omegadrive know that the driver file downloaded from [COLOR=#800080]Treiber-koenig.de[/COLOR] is not extractable. Download Link : http://www.treiber-koenig.de/request.php?283 The file size is definitely smaller than the ones from other mirrors. Could you please let Treiber-Koenig.de know this problem and replace the driver file with the right size? Thanks in advance.

Oct 8, 2006, 06:53 PM	#29
PrEzEs DriverHeaven User Join Date: Feb 2004 Posts: 32 Rep Power: 0	Do they work on X1950 ? Because I can't install them - Says 'Error INF' can't find display device I installed cat's 6.10 beta without problems , but I wish I could use Omega's ... My device : Sapphire Radeon X1950 XTX 512MB device id : Primary : PCI\VEN_1002&DEV_7240&SUBSYS_0B121002&REV_00\5&31F 3E1F0&0&0008 Secondary : PCI\VEN_1002&DEV_7260&SUBSYS_0B131002&REV_00\4&31F 3E1F0&0&0108 Hope this helps add my device to the list... __________________ -=PrEzEs Rig=- \|\| Core2Duo E6400@3.0 GHz \|\| ASUS P5W DH Deluxe \|\| ATi X1950XTX \|\| GeiL DDR2 800 Ultra CL4 2GB Kit \|\| \|\| Cooler Master Real Power Pro 850W PSU \|\| Thermaltake BigWater SE + Chieftec BIG Tower + Custom UV Cathodes \|\| Audigy 2 Value @ KX-Drivers

Oct 8, 2006, 07:26 PM	#30
Pluvious Elisha = hottie Join Date: Jul 2003 Location: USA CA. SF Bay Area Posts: 1,318 Rep Power: 56	I have yet to find a site that has a version that I can even OPEN..let alone install them. EDIT:..ok I redownloaded them from the first site on Omegas list.. worked that time. Whew.. __________________ Last edited by Pluvious; Oct 8, 2006 at 07:44 PM.