brotheresau

How the hell do you set auto O.C or manual O.C it requests a profile but how and what do you do to establish a profile for auto or manual O.C please

__________________
D.F.I LanParty UT 790FX-M2R ~ [COLOR=Lime]4/15/2008 [/COLOR]~
AMD Phenom [COLOR=Lime]9850[/COLOR] Black Edition ~ [COLOR=Red]For Bios Testing[/COLOR] ~
Tuniq Tower 120
2x2gb OCZ Reaper HPC (PC2 8500) 5-5-5-18
POWERCOLOR AX3870 X2 [COLOR=Red]CROSSFIRE[/COLOR]
Auzentech XPlosion
Areca 1231 ML {Intel IOP 341} ~ 6 ~ 250gb Hitachi Sata II Raid 6 ~2~WD 74gb Raptors ~ Raid 0 ~
Plextor 750A
SilverStone OP1000
CM Stacker STC-T01
[COLOR=Red]VISTA.. 32 Bit[/COLOR] @Micro$

ChaosMinionX

Unless you know absolutely what your doing, and know your cooling is efficient please save yourself time and money and use the ATI Overdrive 3 Function, and you can get a max of about 690-700 core / 1000/1050 memory with stock 1.45v or try 1.475v and just use that in conjunction with the ATI hot key poller which should be enabled if not post here and I wil tell you how. But unless you know about voltages and temps and checking for artifacts dont use manual OC's, just set what I told you on ATI Overdrive 3 from the hardware section of ATI Tray Tools

But to be honest, you wont see much improvement in graphics, you might just wanna set your core to 700 or so and leave the memory at 1050 and you might be able to squeek out 1100 if your lucky at stock, but just mess around with the overdrive feature, or just use ATI CCC and use the auto OC tool it works best if you dont know what your doing.

__________________