Activating the Ati HDMI in Device Manager leads to black screen on reboot

OnkelKC · May 4, 2008, 04:06 AM

Hi there,

I just bought my new machine with an Abit AN52S (which has HD Sound onboard) and an Athlon 64 X2 4800+. My Graphics Card is a Club3D HD 3870 DDO Overclocked Edition (which also has HD sound onboard over HDMI).
After I have installed WinXP, I installed the graphics drivers that came with the card (the newer ones don't include the HDMI driver but I tried them too). After the necessary reboot (when the XP Logo fades) my screen stays plain black. So I reboot in Safe Mode, deactivate the thing thats called Microsoft UAA HD..., reboot again and I have my WinXP working without the graphics drivers.
The Device Manager tells me that my card has not enough ressources to work properly. The (deactivated) UAA driver also has this yellow exclamation mark telling me that it has not enough ressources. I had disabled the onboard sound, so this can't be it. With this configuration I installed the motherboard drivers (the newest ones) and enabled the onboard sound again, installed the newest Realtek driver (which automatically installs KB888111 like the HDMI driver from AMD that came with the graphics card) and after all I got my system running with sound network and everything except the 3870.

I've been fiddling with drivers and configuration for three days now and I installed XP three times to have a clean OS. I also installed the drivers in another order (e.g. first the motherboard driver (nForce520) then Catalyst drivers).

This is the first time I can't get a system to run completely and I'm sure it's just a driver crap here but I don't know what to do at the moment.
I'm running the newest Omega Driver (v.4.8 I think).

I saw many people on the inet who had problems with this HDMI driver but I unfortunately never saw someone solving it. I guess the problem is that Windows can't get that the HDMI Chip is on the Radeon and for that is using the same ressources. I also downloaded the Ati HDMI driver from Realtek which doesn't install because I wouldn't have a device using the drivers.

Please Help

beastx · May 5, 2008, 10:10 AM

Is your screen HDMi 1.3??
If not it could be a bad upgrade choice.

Some HDMi drivers - especially on SONY's have the problem of only being incompatible with anything less than HDMi 1.3(current newest one)

So if your drivers are 1.3 and your screen isn't then on restart you'll get a black screen.

Try a new 1.3 ready screen.

OnkelKC · May 6, 2008, 12:50 PM

@1st Thank you for your reply. But actually I'm not even using the HDMI feature. I'm using a DVI-out with a VGA-adapter (I tried two versions of this one, the one that came with my card doesn't have all of the DVI pins and anotherone I earlier got, which has all pins - they're both from ATI).
Unfortunately disabling the HDMI out is not an option because the graphics driver doesn't work then either. Catalyst doesn't start because it says that the driver is not installed (it is

) or not functioning.

I'll call AMD, Club3D and Abit now - maybe they know what's wrong.
I still have to test it on Vista or another mobo to see whether the card is broken

. But if anyone has any suggestion, please let me know.

beastx · May 7, 2008, 08:45 AM

Try disabling all startups and apple, ipod, adobe, office, nero, yahoo, google, and any other weird (3rd party) services via msconfig and try it again.

Try disabling all startups and NON-Microsoft services via msconfig and reinstall graphics drivers in this state.

Also i've seen mention of need to install the Microsoft UAA HD and THEN installing the relevant drivers for sound and graphics.
Outside of that i've never seen any solutions.

May 4, 2008, 04:06 AM	#1
OnkelKC DriverHeaven Newbie Join Date: May 2008 Posts: 2 Rep Power: 0	Activating the Ati HDMI in Device Manager leads to black screen on reboot Hi there, I just bought my new machine with an Abit AN52S (which has HD Sound onboard) and an Athlon 64 X2 4800+. My Graphics Card is a Club3D HD 3870 DDO Overclocked Edition (which also has HD sound onboard over HDMI). After I have installed WinXP, I installed the graphics drivers that came with the card (the newer ones don't include the HDMI driver but I tried them too). After the necessary reboot (when the XP Logo fades) my screen stays plain black. So I reboot in Safe Mode, deactivate the thing thats called Microsoft UAA HD..., reboot again and I have my WinXP working without the graphics drivers. The Device Manager tells me that my card has not enough ressources to work properly. The (deactivated) UAA driver also has this yellow exclamation mark telling me that it has not enough ressources. I had disabled the onboard sound, so this can't be it. With this configuration I installed the motherboard drivers (the newest ones) and enabled the onboard sound again, installed the newest Realtek driver (which automatically installs KB888111 like the HDMI driver from AMD that came with the graphics card) and after all I got my system running with sound network and everything except the 3870. I've been fiddling with drivers and configuration for three days now and I installed XP three times to have a clean OS. I also installed the drivers in another order (e.g. first the motherboard driver (nForce520) then Catalyst drivers). This is the first time I can't get a system to run completely and I'm sure it's just a driver crap here but I don't know what to do at the moment. I'm running the newest Omega Driver (v.4.8 I think). I saw many people on the inet who had problems with this HDMI driver but I unfortunately never saw someone solving it. I guess the problem is that Windows can't get that the HDMI Chip is on the Radeon and for that is using the same ressources. I also downloaded the Ati HDMI driver from Realtek which doesn't install because I wouldn't have a device using the drivers. Please Help Last edited by OnkelKC; May 4, 2008 at 04:11 AM.

May 5, 2008, 10:10 AM	#2
beastx DriverHeaven Newbie Join Date: Apr 2008 Location: in my car Posts: 11 Rep Power: 0 System Specs	Is your screen HDMi 1.3?? If not it could be a bad upgrade choice. Some HDMi drivers - especially on SONY's have the problem of only being incompatible with anything less than HDMi 1.3(current newest one) So if your drivers are 1.3 and your screen isn't then on restart you'll get a black screen. Try a new 1.3 ready screen. Last edited by beastx; May 5, 2008 at 11:35 AM.

May 6, 2008, 12:50 PM	Thread Starter #3
OnkelKC DriverHeaven Newbie Join Date: May 2008 Posts: 2 Rep Power: 0	I don't use HDMI @1st Thank you for your reply. But actually I'm not even using the HDMI feature. I'm using a DVI-out with a VGA-adapter (I tried two versions of this one, the one that came with my card doesn't have all of the DVI pins and anotherone I earlier got, which has all pins - they're both from ATI). Unfortunately disabling the HDMI out is not an option because the graphics driver doesn't work then either. Catalyst doesn't start because it says that the driver is not installed (it is ) or not functioning. I'll call AMD, Club3D and Abit now - maybe they know what's wrong. I still have to test it on Vista or another mobo to see whether the card is broken . But if anyone has any suggestion, please let me know.

May 7, 2008, 08:45 AM	#4
beastx DriverHeaven Newbie Join Date: Apr 2008 Location: in my car Posts: 11 Rep Power: 0 System Specs	Try disabling all startups and apple, ipod, adobe, office, nero, yahoo, google, and any other weird (3rd party) services via msconfig and try it again. Try disabling all startups and NON-Microsoft services via msconfig and reinstall graphics drivers in this state. Also i've seen mention of need to install the Microsoft UAA HD and THEN installing the relevant drivers for sound and graphics. Outside of that i've never seen any solutions. Last edited by beastx; May 7, 2008 at 08:59 AM.