New Radeon Omega Drivers 2.5.44 (Cat 4.5 based)

Chaos · May 23, 2004, 04:07 AM

Quote:

Originally posted by Darkbandit
Am having a problem with the new Omega drivers. I have a Inspiron 8600 running a 1.4 Ghz Centrino processor, and when I install the drivers after installing the latest chipset drivers from Dell's website, I have a tremendous slowdown whenever my screen refreshes. Could there be a conflict with the drivers and the chipset drivers that I have downloaded?

Install the Dell chipset drivers again after the video card drivers.

jumpyjim · May 23, 2004, 08:06 PM

Still no FireGL support

ronnn · May 24, 2004, 06:20 AM

So is Far Cry a definite no go? My favorite game lately.

Judas · May 24, 2004, 07:41 AM

far cry runs actually better for me....

ronnn · May 24, 2004, 10:37 AM

Quote:

Originally posted by Judas
far cry runs actually better for me....

For myself also! Thanks

redpandaroon · May 24, 2004, 01:57 PM

smooth set of drivers!

these omegas run better on my setup than the official 4.5 cats.
a lot smoother for me in games like morrowind and cs.

thanks!

maxthon · May 24, 2004, 08:08 PM

I can't seem to get radlinker to work with 4.5, I did a clean install from 4.4, uninstalling both omega and radlinker so there shouldn't be a conflict there.. any suggestions?

By not working I mean, I set an o/c and hit set, then I hit the bios (I think it's bios) so that it pops up saying it will boot with those new settings but on restart it goes back to the normal clock speed and the checkmark to allow for an o/c is unchecked.

WinXP Pro SP1 w/updates
Abit nf7-s w/ 2500+ barton @ 2.36ghz
9800 Pro

Thanks.. if you can help

Judas · May 25, 2004, 08:10 AM

you have to clikc "Use Current"... hitting BIOS will revert to the bios Clock speed.... it confused me at first... read the readme file for more info...

BryonB · May 30, 2004, 08:13 PM

I have a Radeon 8500 (64MB version), running under Windows XP SP1, with an AMD Athlon XP 1800+ CPU.

I installed this new Omega driver directly on top of the previous set.

After installing I tried running the 3DMark 2001 SE benchmark, and it gave a message that it couldn't run because some required Direct-X features could not be detected.

I ran DXDiag.exe, and it didn't show any problems with Direct-X (I have version 9.0b installed).

I reinstalled the Omega driver again, and tried running 3DMark 2001 SE again, and got the same result.

A little while later, I tried running the benchmark again - and this time it ran - albeit slowly.
The benchmark results are a lot slower than before (~ 7900).

I may have to go back to a previous version.

Omegadrive · May 30, 2004, 10:28 PM

Quote:

Originally posted by BryonB
I have a Radeon 8500 (64MB version), running under Windows XP SP1, with an AMD Athlon XP 1800+ CPU.

I installed this new Omega driver directly on top of the previous set.

After installing I tried running the 3DMark 2001 SE benchmark, and it gave a message that it couldn't run because some required Direct-X features could not be detected.

I ran DXDiag.exe, and it didn't show any problems with Direct-X (I have version 9.0b installed).

I reinstalled the Omega driver again, and tried running 3DMark 2001 SE again, and got the same result.

A little while later, I tried running the benchmark again - and this time it ran - albeit slowly.
The benchmark results are a lot slower than before (~ 7900).

I may have to go back to a previous version.

Just re-install the AGP chipset drivers for your MB, that will fix it.

Chaos · May 30, 2004, 11:21 PM

Quote:

Originally posted by Omegadrive
Just re-install the AGP chipset drivers for your MB, that will fix it.

My thoughts exactly, it just seems like a broken record repeating itself but oddly enough after installing new video card drivers if you notice visable refreshing on screen and performance loss it usually tied the the Chipset AGP driver needed a fresh install

reignofchaos · May 31, 2004, 10:54 PM

I am having problems reverting back from Omega 4.5 to the official Catalysts(tried 3.7,4.3,4.4,4.5). Everytime I install the official drivers, it boots with the default XP drivers and says device cannot start! If I install omegas again, it works. I tried using drivercleaner to remove and also followed the guide but this happens whatever I do. It'll always show device cannot start.

bastardodentro · Jun 1, 2004, 10:18 AM

Sorry for my english!

Seems occours only with last Omega Driver!
No overclock at all!
No Novell Client 4.83 installed

WinXP Pro SP1
ABIT AN7
2 X KINGSTON 256 400 MHZ
Barton 2500+
gEcUBE 9600 xt

Tnks in advance.

Ciao.

BWX · Jun 1, 2004, 11:52 AM

Quote:

Originally posted by reignofchaos
I am having problems reverting back from Omega 4.5 to the official Catalysts(tried 3.7,4.3,4.4,4.5). Everytime I install the official drivers, it boots with the default XP drivers and says device cannot start! If I install omegas again, it works. I tried using drivercleaner to remove and also followed the guide but this happens whatever I do. It'll always show device cannot start.

Did you use the cab cleaner? It took me about 1/2 hour the first time I did it- It takes a while, but it works.

MEABeemer · Jun 1, 2004, 07:13 PM

Quote:

Originally posted by MEABeemer
When I try to uninstall any version of Catalyst/Omega or just try to install it over the one currently installed, I get an "Internal Failure"-error with the text: "Error Number: 0x80040707" "Description:".

And after clicking "OK" I get a "Severe"-error with the text: "ISLAYER.DLL not loaded into memory".

And after clicking "OK" again I get an "Unhandled Exeption"-error with the text: "Error Number: 0x80040702" "Description: Failed to load dll: ISLAYER" "Setup will now terminate."

And after clicking "OK" for the last time it exits!

This has happened to me since I ever had a Radeon in Microsoft Windows XP (ATi Radeon 7200 VIVO 64MB DDR / Gigabyte Radeon 8500XT 128MB DDR / ATi Radeon 9800 Pro 128MB / and now waiting for the ATi X800 XT PCI Express).

The only solution I ever came up with is a clean install.

Nobody in the world could ever help me, they tried to help but came up with non-working solutions.

Can anyone (who maybe even had experience with this problem) REALLY help me?

Still no solutions?

Anyone...?

Please......?

axis991 · Jun 2, 2004, 12:33 AM

Omega,

Thank you for the drivers ! As for years they are so much better than stock ATI
"Even though they got better too !" I create cd's for my Digitech GenetX forum
for nothing the same as you do.It's great to share your talents with the world
and have people appreciate it ! If anyone wants 6 cd's of great guitar music,
check out these two sites !

1.GenX cd's 1- 6

http://www.codekinesis.com/

2. GenX cd's 4 -5

http://www.saladrecords.com/genx/index.htm

Thank you again Omega for the great drivers, I posted the link to your
site for all that use AT and Nividia cards your way !

Peace,
Axis991

dillhole_99 · Jun 2, 2004, 04:27 AM

Is it just my system or do these drivers not correctly detect or support my Fire GL X2-256 card? I have to manually select the driver fro mthe Omega installation directory, but then I don't get HTDV support in my displays tab and no DirectX, OpenGL, VPU, etc tabs in control panel. If I install drivers as Radeon 9800 Pro, HDTV support works, but still no OpenGL and no DirectX, OpenGL, VPU, etc tabs in control panel? Anything I can do to enable these tabs, keep HDTV support and get my OpenGL games to work? Thanks.

Omegadrive · Jun 2, 2004, 05:42 AM

Quote:

Originally posted by dillhole_99
Is it just my system or do these drivers not correctly detect or support my Fire GL X2-256 card? I have to manually select the driver fro mthe Omega installation directory, but then I don't get HTDV support in my displays tab and no DirectX, OpenGL, VPU, etc tabs in control panel. If I install drivers as Radeon 9800 Pro, HDTV support works, but still no OpenGL and no DirectX, OpenGL, VPU, etc tabs in control panel? Anything I can do to enable these tabs, keep HDTV support and get my OpenGL games to work? Thanks.

Sorry, this was my mistake, there is support for FireGL cards on my set, but is partially broken, not all cards will work.
This will be fixed for my next set, FireGL support will be fully implemented.

~~BMG_Cya=-~~ · Jun 4, 2004, 04:34 AM

I'm using these new ones, but am also using the latest Radlinker to force Aniso and Temp2 4xAA.
Far Cry...Painkiller...GTR Demo...and the usual all run great, and look friggin incredible relatively.

As always...appreciate the work Omega...

BTW...what are the 2.0sahder options? Does this force 2.0 in say a DX8 game, or is only for certain
titles with specfic code?

Also...a little light shed on the 16,24,32,8-bit stencil settings and all others would be cool.

MEABeemer · Jun 4, 2004, 06:10 PM

Yo Omega!

Any comment on this?!

Please respond!

Everybody's dieing to hear your response on this one!

(Just played about 30 minutes of "Breed", WHAT CRAP!!! YOU CALL THIS "THE HALO-KILLER"?! WHAAAAAAAAHAHAHAHAHAHA)
(Ofcourse knowing me you all know what I did with that so-called "GAME"......Drove about 285KM/H on the highway.......Put on Evanescence - Going Under......Opened up the top window.......ADIOS Breed!!!)
(So Germany please! Do what you do best! Produce the best cars in the world! Like my BMW M5 2K1 for instance!)

C U guys later!

FR4GGL3 · Jun 5, 2004, 02:33 PM

Quote:

Originally posted by MEABeemer
Yo Omega!

Any comment on this?!

Please respond!

Everybody's dieing to hear your response on this one!

(Just played about 30 minutes of "Breed", WHAT CRAP!!! YOU CALL THIS "THE HALO-KILLER"?! WHAAAAAAAAHAHAHAHAHAHA)
(Ofcourse knowing me you all know what I did with that so-called "GAME"......Drove about 285KM/H on the highway.......Put on Evanescence - Going Under......Opened up the top window.......ADIOS Breed!!!)
(So Germany please! Do what you do best! Produce the best cars in the world! Like my BMW M5 2K1 for instance!)

C U guys later!

so what? k, breed is not cutting edge, but wtf ?
germans do not only produce the best cars in the world - there are enough examples of bad software coming from the u.s.a.
what about far cry?

sorry for being so rude - but that was necessary!

btw: bmw is crap - there is only one real bavarian car brand: AUDI

MEABeemer · Jun 6, 2004, 11:06 AM

Quote:

Originally posted by FR4GGL3
so what? k, breed is not cutting edge, but wtf ?
germans do not only produce the best cars in the world - there are enough examples of bad software coming from the u.s.a.
what about far cry?

sorry for being so rude - but that was necessary!

btw: bmw is crap - there is only one real bavarian car brand: AUDI

My friend.
You're not rude at all.
It's okay.

But, please don't argue with me when it comes to hardware on the asphalt.

The fast cars that Audi produces rely for 99% on turbo's...like their topmodel; the "RS6", for instance.
And if you take a BMW M3 CSL for instance...it packs a 112.5 HP a liter...wich came up 3rd on the Deutsche bahn in Frankfurt...right behind the Porsche GT2 (wich uses turbo's by the way)...
SO WHAT that the RS6 with 4.2 liter reaches 100 KM/H in 4.7 sec. and the M3 CSL with 3.2 liter in 4.9 sec. I don't like racin' on a straight line...I see more action in the curves. !!! WITHOUT ANY CRAP TURBO !!! Just PURE CILINDER-POWER!!! (Packs up with a better sound than turbo's actualy)

Don't get me wrong, Audi is a very very good car-brand. (I actualy owned an S3 2K and a TT Quatro)
But BMW is unbeatable when it comes to an all in one of speed, quality, low cost, low consuming, 100% power in EVERY gear, (high)class, very very eye-cathin' and drives super-smooth what makes you and your BMW one!

I actualy see Mercedes (and the rest) as nVidia and BMW as ATi.
nVidia = increasing MHz's and overclocking for speed (Mercedes (and the rest) increasing liters and turbo's)
ATi = increasing cutting edge techniques (BMW evolving their M-technology)

Guess I made my point clearly.

But you were right on the many mistakes that the US makes with some particular games.
Germany has made a lot of breaktrough software like "CloneCD" for instance.

But it's not a game.

(Now I'm waitin' for "Need for Speed: Underground 2" so I can play it on my PlayStation2 in my M5 2K1)

(Sorry if I'm commercing my stuff so much. But I like what I have and I'm not harsch by letting others know that)

BWX · Jun 6, 2004, 03:21 PM

Quote:

Originally posted by FR4GGL3

btw: bmw is crap - there is only one real bavarian car brand: AUDI

Huh? You've never heard of the M series I take it? The best sport sedan in the world for the last 20years or so.. pretty much undisputed by anyone who knows anything about cars.

Jazzyjazz2004 · Jun 6, 2004, 05:13 PM

Good DAy,

"Serious Sam : THe Second Encounter" FREEZES after a few minutes of gameplay and I have to reboot the computer.

Anybody else got this problem?

Reverting to OMEGA 4.4 (2.5.36b) remedies the problem.

Jazz

Jalle64 · Jun 6, 2004, 06:37 PM

Quote:

Originally posted by MEABeemer
My friend.
You're not rude at all.
It's okay.

But, please don't argue with me when it comes to hardware on the asphalt.

The fast cars that Audi produces rely for 99% on turbo's...like their topmodel; the "RS6", for instance.
And if you take a BMW M3 CSL for instance...it packs a 112.5 HP a liter...wich came up 3rd on the Deutsche bahn in Frankfurt...right behind the Porsche GT2 (wich uses turbo's by the way)...
SO WHAT that the RS6 with 4.2 liter reaches 100 KM/H in 4.7 sec. and the M3 CSL with 3.2 liter in 4.9 sec. I don't like racin' on a straight line...I see more action in the curves. !!! WITHOUT ANY CRAP TURBO !!! Just PURE CILINDER-POWER!!! (Packs up with a better sound than turbo's actualy)

Don't get me wrong, Audi is a very very good car-brand. (I actualy owned an S3 2K and a TT Quatro)
But BMW is unbeatable when it comes to an all in one of speed, quality, low cost, low consuming, 100% power in EVERY gear, (high)class, very very eye-cathin' and drives super-smooth what makes you and your BMW one!

I actualy see Mercedes (and the rest) as nVidia and BMW as ATi.
nVidia = increasing MHz's and overclocking for speed (Mercedes (and the rest) increasing liters and turbo's)
ATi = increasing cutting edge techniques (BMW evolving their M-technology)

Guess I made my point clearly.

But you were right on the many mistakes that the US makes with some particular games.
Germany has made a lot of breaktrough software like "CloneCD" for instance.

But it's not a game.

(Now I'm waitin' for "Need for Speed: Underground 2" so I can play it on my PlayStation2 in my M5 2K1)

(Sorry if I'm commercing my stuff so much. But I like what I have and I'm not harsch by letting others know that)

Aren`t that a little OT?!

GeoffM · Jun 6, 2004, 10:00 PM

I'm sorry to This set of Drivers has been the Worse to install, I've used OD's drivers since the Rage Era but this set is preplexing even me. a Severe Error occures at end of installation suggesting I switch to stanard VGA before re attempting - Okay I've had to do that way back when a few times (after all I've been in the business of computer repair 18 years) after failing with that method I tryed some various others (roll back, driver cleaners, uninstall from device manager, read this entire page heavy fourm, ect) downloaded and install ATI's latest and had no problems ran pretty darn good. tried again same error! short of going thru the registry and deleting every referance to drivers,video, ect there's got to be a soultion that someone as figure'd out.

Son_of_Thunder · Jun 7, 2004, 07:03 PM

i also had a problem w/ the install for these babies. it worked fine in my gaming machine (which has a 9800pro) but wouldn't load on my older secondary pc (which is running a 9000 pro). they just simply wouldn't install the first two times, so i switched back to the 4.4's and they worked fine.

reignofchaos · Jun 7, 2004, 10:31 PM

I had the same stop error as well. (Error 10 : Device cannot start) No driver cleaner worked so reinstalled the OS and now its fine.

MEABeemer · Jun 9, 2004, 10:39 PM

Yo Omega!
Workin' on da 4.6's?!

Hope these will be a lot better than the 4.5's.
Heard from allmost everywhere they were kind of crappy.

But no matter!
I never had da chance to use them anyway.
Since I had that error, remember?

I'm preparing my PC for a fresh and clean installation.
Just waitin' for your 4.6's now...

Hope to hear from ya soon!
C ya!

CrapolaJola · Jun 10, 2004, 07:09 PM

Omega I mentioned this problem in the 4.4 thread and one other user back me up on it as well, but you never replied (probably assumed the problem was related to something else, as the problem didn't exist until 4.4). In CoD the MP works fine (in 4.4 it did and I'll test it in this set as well), but the SP freezes at various points, generally when the german MGs start firing. I'm almost positive this is an issue with the drivers (might be ATI not just yours) as reverting to previous sets fixes the problem. Could someone here please try the CoD SP with the stock ATI 4.4s or 4.5s to help solve this. Thanks

May 24, 2004, 01:57 PM	#156
redpandaroon DriverHeaven Newbie Join Date: Oct 2003 Location: So. California Posts: 7 Rep Power: 0	smooth set of drivers! these omegas run better on my setup than the official 4.5 cats. a lot smoother for me in games like morrowind and cs. thanks! __________________ flaming hot cheetos and flaming hot lays = inferno.

May 30, 2004, 08:13 PM	#159
BryonB HardwareHeaven Junior Member Join Date: Oct 2002 Posts: 53 Rep Power: 0	problems with this new version I have a Radeon 8500 (64MB version), running under Windows XP SP1, with an AMD Athlon XP 1800+ CPU. I installed this new Omega driver directly on top of the previous set. After installing I tried running the 3DMark 2001 SE benchmark, and it gave a message that it couldn't run because some required Direct-X features could not be detected. I ran DXDiag.exe, and it didn't show any problems with Direct-X (I have version 9.0b installed). I reinstalled the Omega driver again, and tried running 3DMark 2001 SE again, and got the same result. A little while later, I tried running the benchmark again - and this time it ran - albeit slowly. The benchmark results are a lot slower than before (~ 7900). I may have to go back to a previous version.

Jun 1, 2004, 10:18 AM	#163
bastardodentro DriverHeaven Newbie Join Date: Jun 2004 Posts: 1 Rep Power: 0	Stop 0x00000044 Multiple_IRP_Complete_Requests Sorry for my english! Seems occours only with last Omega Driver! No overclock at all! No Novell Client 4.83 installed WinXP Pro SP1 ABIT AN7 2 X KINGSTON 256 400 MHZ Barton 2500+ gEcUBE 9600 xt Tnks in advance. Ciao. Last edited by bastardodentro; Jun 1, 2004 at 10:27 AM.

Jun 2, 2004, 04:27 AM	#167
dillhole_99 DriverHeaven Newbie Join Date: Feb 2004 Posts: 1 Rep Power: 0	NO Fire GL Support??? Is it just my system or do these drivers not correctly detect or support my Fire GL X2-256 card? I have to manually select the driver fro mthe Omega installation directory, but then I don't get HTDV support in my displays tab and no DirectX, OpenGL, VPU, etc tabs in control panel. If I install drivers as Radeon 9800 Pro, HDTV support works, but still no OpenGL and no DirectX, OpenGL, VPU, etc tabs in control panel? Anything I can do to enable these tabs, keep HDTV support and get my OpenGL games to work? Thanks.

Jun 4, 2004, 06:10 PM	#170
MEABeemer C-Groove StreetFighter Join Date: Mar 2004 Posts: 405 Rep Power: 0 System Specs	Yo Omega! Any comment on this?! Please respond! Everybody's dieing to hear your response on this one! (Just played about 30 minutes of "Breed", WHAT CRAP!!! YOU CALL THIS "THE HALO-KILLER"?! WHAAAAAAAAHAHAHAHAHAHA) (Ofcourse knowing me you all know what I did with that so-called "GAME"......Drove about 285KM/H on the highway.......Put on Evanescence - Going Under......Opened up the top window.......ADIOS Breed!!!) (So Germany please! Do what you do best! Produce the best cars in the world! Like my BMW M5 2K1 for instance!) C U guys later! __________________ XBox360 Slim 250GB

May 23, 2004, 08:06 PM	#152
jumpyjim ATI FanBoi Join Date: Jun 2003 Posts: 23 Rep Power: 0	Still no FireGL support

May 24, 2004, 06:20 AM	#153
ronnn DriverHeaven Senior Member Join Date: Jul 2003 Posts: 617 Rep Power: 0	So is Far Cry a definite no go? My favorite game lately.

May 24, 2004, 08:08 PM	#157
maxthon DriverHeaven Newbie Join Date: May 2004 Posts: 18 Rep Power: 0	I can't seem to get radlinker to work with 4.5, I did a clean install from 4.4, uninstalling both omega and radlinker so there shouldn't be a conflict there.. any suggestions? By not working I mean, I set an o/c and hit set, then I hit the bios (I think it's bios) so that it pops up saying it will boot with those new settings but on restart it goes back to the normal clock speed and the checkmark to allow for an o/c is unchecked. WinXP Pro SP1 w/updates Abit nf7-s w/ 2500+ barton @ 2.36ghz 9800 Pro Thanks.. if you can help

May 31, 2004, 10:54 PM	#162
reignofchaos DriverHeaven Newbie Join Date: May 2004 Posts: 7 Rep Power: 0	I am having problems reverting back from Omega 4.5 to the official Catalysts(tried 3.7,4.3,4.4,4.5). Everytime I install the official drivers, it boots with the default XP drivers and says device cannot start! If I install omegas again, it works. I tried using drivercleaner to remove and also followed the guide but this happens whatever I do. It'll always show device cannot start.

Jun 2, 2004, 12:33 AM	#166
axis991 DriverHeaven Junior Member Join Date: Oct 2002 Posts: 27 Rep Power: 0	Omega, Thank you for the drivers ! As for years they are so much better than stock ATI "Even though they got better too !" I create cd's for my Digitech GenetX forum for nothing the same as you do.It's great to share your talents with the world and have people appreciate it ! If anyone wants 6 cd's of great guitar music, check out these two sites ! 1.GenX cd's 1- 6 http://www.codekinesis.com/ 2. GenX cd's 4 -5 http://www.saladrecords.com/genx/index.htm Thank you again Omega for the great drivers, I posted the link to your site for all that use AT and Nividia cards your way ! Peace, Axis991

Jun 4, 2004, 04:34 AM	#169
~~BMG_Cya=-~~ Banned Join Date: Mar 2003 Location: U.S.A. Posts: 718 Rep Power: 0	I'm using these new ones, but am also using the latest Radlinker to force Aniso and Temp2 4xAA. Far Cry...Painkiller...GTR Demo...and the usual all run great, and look friggin incredible relatively. As always...appreciate the work Omega... BTW...what are the 2.0sahder options? Does this force 2.0 in say a DX8 game, or is only for certain titles with specfic code? Also...a little light shed on the 16,24,32,8-bit stencil settings and all others would be cool.

Jun 6, 2004, 05:13 PM	#174
Jazzyjazz2004 DriverHeaven Junior Member Join Date: Sep 2003 Posts: 64 Rep Power: 0	"Serious Sam : THe Second Encounter" FREEZES Good DAy, "Serious Sam : THe Second Encounter" FREEZES after a few minutes of gameplay and I have to reboot the computer. Anybody else got this problem? Reverting to OMEGA 4.4 (2.5.36b) remedies the problem. Jazz __________________ nVidia 5900 XT @ 351\303,Abit NF7-2 Rev. 2, Athlon XP 2500 MOBILE @ 210*12@1.825V = 2520 Mhz, SLK-947-U HS, 512 MB Corsair 3000 ddr @ 210 Mhz, 200 GB Western Digital SATA, Lite On Cd-Rw/DvD Combo Drive, Antec TruPower 480W PS

Jun 6, 2004, 10:00 PM	#176
GeoffM DriverHeaven Newbie Join Date: Dec 2002 Location: Bellingham, WA. Posts: 8 Rep Power: 0	I'm sorry to This set of Drivers has been the Worse to install, I've used OD's drivers since the Rage Era but this set is preplexing even me. a Severe Error occures at end of installation suggesting I switch to stanard VGA before re attempting - Okay I've had to do that way back when a few times (after all I've been in the business of computer repair 18 years) after failing with that method I tryed some various others (roll back, driver cleaners, uninstall from device manager, read this entire page heavy fourm, ect) downloaded and install ATI's latest and had no problems ran pretty darn good. tried again same error! short of going thru the registry and deleting every referance to drivers,video, ect there's got to be a soultion that someone as figure'd out. __________________ AMD Athlon 4800+ X2 Asus AV600 3 GIG Kingston PC3200 RAM ATI x1600 512 SB Audigy 2 ZS Platiumn Pro

Jun 7, 2004, 07:03 PM	#177
Son_of_Thunder HardwareHeaven Senior Member Join Date: Jun 2004 Location: Kalamazoo, MI Posts: 1,441 Rep Power: 50 System Specs	i also had a problem w/ the install for these babies. it worked fine in my gaming machine (which has a 9800pro) but wouldn't load on my older secondary pc (which is running a 9000 pro). they just simply wouldn't install the first two times, so i switched back to the 4.4's and they worked fine. Last edited by sthunder; Jun 8, 2004 at 05:48 AM.

Jun 7, 2004, 10:31 PM	#178
reignofchaos DriverHeaven Newbie Join Date: May 2004 Posts: 7 Rep Power: 0	I had the same stop error as well. (Error 10 : Device cannot start) No driver cleaner worked so reinstalled the OS and now its fine.

Jun 9, 2004, 10:39 PM	#179
MEABeemer C-Groove StreetFighter Join Date: Mar 2004 Posts: 405 Rep Power: 0 System Specs	Yo Omega! Workin' on da 4.6's?! Hope these will be a lot better than the 4.5's. Heard from allmost everywhere they were kind of crappy. But no matter! I never had da chance to use them anyway. Since I had that error, remember? I'm preparing my PC for a fresh and clean installation. Just waitin' for your 4.6's now... Hope to hear from ya soon! C ya! __________________ XBox360 Slim 250GB

Jun 10, 2004, 07:09 PM	#180
CrapolaJola The Great DaK Join Date: Jan 2004 Posts: 317 Rep Power: 0	hmm Omega I mentioned this problem in the 4.4 thread and one other user back me up on it as well, but you never replied (probably assumed the problem was related to something else, as the problem didn't exist until 4.4). In CoD the MP works fine (in 4.4 it did and I'll test it in this set as well), but the SP freezes at various points, generally when the german MGs start firing. I'm almost positive this is an issue with the drivers (might be ATI not just yours) as reverting to previous sets fixes the problem. Could someone here please try the CoD SP with the stock ATI 4.4s or 4.5s to help solve this. Thanks __________________ P2 X4 @ 3.6ghz, 4gb ddr3, SSD, 5870 @ 950/1250 + a 3ghz i5 lappy