Problem with Direct3d and Opengl on x600

XHPrime · May 4, 2005, 11:01 PM

[color=black]I have an HP Pavillion zd8000 with a ATI Mobility Radeon X600 and have been using it for about 2 weeks now. I have installed the latest drivers for my Graphics card from the Omega Website

My Problem was before installing Omega Drivers: After a while of using my computer I got screen glitch and eventually the screen just went blank, although the LCD Display is still on (i can tell because of the screen glow). Now whenever I boot up normally after the windows loading screen it just goes blank. I can boot into safe mode fine but do not know a fix for this problem.

I fixed this by using Omega Drivers but now when I run DxDiag It i stating I cant use Direct3d and that my available video memory is n/a(whats with that). when I run Call of Duty it says it cant run OpenGL. Right now I have hardware acceleration set to one below max on the slider under Display>Advanced>Troubleshoot. If I set the bar to max the screen glitches and I get alot of lag, but even with the slider set to max I get the opengl and direct3d problems.

I am wondering if I should switch Drivers or if theyre is a fix to these symptoms.

http://www.mulgoreguardians.com/DxDiag.txt

heres that Call of Duty Error:

http://www.mulgoreguardians.com/CoD_Error.txt
[/color]

cswiger · May 5, 2005, 08:38 AM

Try updating Radlinker; I'm not sure the version with those Omega drivers understands your x600, which is why CoD is seeing things like:

DDraw Status: Not Available
D3D Status: Not Available
AGP Status: Not Available

You might have to wait a bit, and use mfr drivers, until ChrisW & Omega can get an update out for your card, too...

~~ut2k4wikichici~~ · May 5, 2005, 10:35 AM

Yo XH Prime untill the OMEGA drivers come out you should just use the crap Catalist 5.4 drivers from ati.com

redsolar · May 5, 2005, 04:52 PM

Note, to use official CATALYST drivers you will need to modify them using Mobility Modder

May 4, 2005, 11:01 PM	#1
XHPrime DriverHeaven Newbie Join Date: May 2005 Posts: 2 Rep Power: 0	Problem with Direct3d and Opengl on x600 [color=black]I have an HP Pavillion zd8000 with a ATI Mobility Radeon X600 and have been using it for about 2 weeks now. I have installed the latest drivers for my Graphics card from the Omega Website My Problem was before installing Omega Drivers: After a while of using my computer I got screen glitch and eventually the screen just went blank, although the LCD Display is still on (i can tell because of the screen glow). Now whenever I boot up normally after the windows loading screen it just goes blank. I can boot into safe mode fine but do not know a fix for this problem. I fixed this by using Omega Drivers but now when I run DxDiag It i stating I cant use Direct3d and that my available video memory is n/a(whats with that). when I run Call of Duty it says it cant run OpenGL. Right now I have hardware acceleration set to one below max on the slider under Display>Advanced>Troubleshoot. If I set the bar to max the screen glitches and I get alot of lag, but even with the slider set to max I get the opengl and direct3d problems. I am wondering if I should switch Drivers or if theyre is a fix to these symptoms. http://www.mulgoreguardians.com/DxDiag.txt heres that Call of Duty Error: http://www.mulgoreguardians.com/CoD_Error.txt [/color] Last edited by XHPrime; May 4, 2005 at 11:09 PM.

May 5, 2005, 08:38 AM	#2
cswiger DriverHeaven Addict Join Date: Nov 2004 Location: NYC Posts: 233 Rep Power: 0	Try updating Radlinker; I'm not sure the version with those Omega drivers understands your x600, which is why CoD is seeing things like: DDraw Status: Not Available D3D Status: Not Available AGP Status: Not Available You might have to wait a bit, and use mfr drivers, until ChrisW & Omega can get an update out for your card, too... __________________ Do you remember Shalebridge Cradle? Beware! The Cradle doesn't forget.... AMD Opteron 185 @ 2.6GHz/200HTT \| 2GB G.Skill DDR3200 @ 2-3-2-5/1T \| 512MB eVGA 8800GT @ 600/1800 \| SB Audigy 2ZS eX, Outlaw 1050 6.1ch amp, Paradigm speakers \| MSI K8N Diamond Plus mainboard \| black Lian-Li USB68 case + Foxconn FX600-GLN 600W PSU \| 2xWDC3200AAKS (RAID1) \| Sony GDM-F500R CRT, BENQ G2400W LCD

May 5, 2005, 04:52 PM	#4
redsolar Off duty Join Date: Jul 2003 Location: Las Vegas, USA Posts: 1,242 Rep Power: 0 System Specs	Note, to use official CATALYST drivers you will need to modify them using Mobility Modder __________________ Real_Men_Do_Not_Use_Space_Bar Main rig: Intel Core i7 930 @ 4.0 Ghz \| Corsair H50 Push/Pull \| 12GB OCZ DDR3 \| ASUS Radeon HD 5850 \| 3x 1TB Samsung F3 RAID5 on Dell PERC 5i SAS + 1TB Hitachi \| MSI X58 Pro-e \| 850W Antec Truepower Quattro \| RocketFish by Lian Li Full Tower Case \| Gateway XHD3000 30" LCD \| Dell 2408WFP 24" LCD \| Dell 2407WFP 24" LCD \| Logitech Z-5500 Speakers \| Windows 7 Ultimate x64 Laptop: Samsung x360-34P \| Core 2 Duo SU9400 1.4 GHz \| 4GB DDR3 \| 128GB Samsung SSD \| Intel 4500M w/ HDMI \| WiFi \| Bluetooth \| 13.3" WLED 1280x800 \| Windows 7 Professional x64

May 5, 2005, 10:35 AM	#3
~~ut2k4wikichici~~ Banned Join Date: May 2005 Location: Australia AKA. Kangaroo country Posts: 340 Rep Power: 0	Yo XH Prime untill the OMEGA drivers come out you should just use the crap Catalist 5.4 drivers from ati.com