CLI.exe problem

SexPistoL · Aug 17, 2005, 06:54 PM

When I installed Cat's 5.8 my CPU keeps pulsing from 0% - 33% non stop. When I look in "processes in task manager" CLI.exe is trying to start up but shuts down again. This is constantly happening every second and I believe that is why my CPU keeps going up and down.

I am stiill using the Cat 5.8 driver but I have removed the CCC and this has resolved the problem, but I want to use the CCC. Has anyone else come across this before?

bake15 · Aug 17, 2005, 07:12 PM

which version of .net framework are you using, if its 1.1 do you have the 2 updates for it?

SexPistoL · Aug 17, 2005, 07:15 PM

I have SP1 for it. I redownloaded 1.1 and SP1 earlier and reinstalled. But that wasn't the problem..........

Robert McClelland · Aug 17, 2005, 07:16 PM

Udated your windows installers. Please used autopatcher xp from neowin for all xp downloads

SexPistoL · Aug 17, 2005, 07:26 PM

I'm using 3.1, that's the latest I think

SexPistoL · Aug 17, 2005, 08:05 PM

Come on Terry I know you are around some where.......

HELLLLLLLLLLLLP me please

Stop It · Aug 17, 2005, 08:26 PM

Try uninstalling all of the drivers, use DriverCleaner, then re-install the 5.8s and see if it works, sometimes an installation can go squiffy, it happens, good luck.

SexPistoL · Aug 17, 2005, 08:31 PM

I have tried 3 times now M8, still no good but thx anyway.

Ferret_Style · Aug 17, 2005, 08:32 PM

last time i had an issue with CCC not working right it was cause i used DC and not unistalled them the right way frist.

I fixed it by reinstalling the old ccc then unistalling it using add remove programs. Then i installed the new with no issues.

H3X4D3C1M4L · Aug 17, 2005, 09:19 PM

If you're running a firewall make sure CLI.exe has access to the local area network (i.e. 127.0.0.x)

SexPistoL · Aug 17, 2005, 11:35 PM

How do I do that?

H3X4D3C1M4L · Aug 18, 2005, 02:36 AM

Just allow it to have access to the whole internet or whatever.... it wont actually go anywhere and it doesn't report anything and you DID buy the card and legally own it so whats the big deal

SexPistoL · Aug 18, 2005, 03:40 AM

Thx for your time guys but it's sussed! WoooooooooooooooHoooooooooo !
Well smooth dvr's and CCC. I like em! The problem was the .net (PANTS) after I reinstalled them earlier there was a hot fix that came in from "Dimdows" all sorted now. Thx again for your time. Hey Hex thx M8.............

popeye · Aug 18, 2005, 04:56 AM

Same problem. I uninstalled and shut down my firewall when installing the 5.8's. I still get that error and ATI drivers aren't there. What am I doing wrong then? Help very much appreciated, thanks.

H3X4D3C1M4L · Aug 18, 2005, 05:11 AM

Quote:

Originally Posted by SexPistoL

Thx for your time guys but it's sussed! WoooooooooooooooHoooooooooo !
Well smooth dvr's and CCC. I like em! The problem was the .net (PANTS) after I reinstalled them earlier there was a hot fix that came in from "Dimdows" all sorted now. Thx again for your time. Hey Hex thx M8.............

Not a problem man

@popeye: You gotta make sure after the fact that it still has access. You don't need to uninstall the firewall. My advice now is just uninstall ATI stuff, driver cleaner, fire wall install, then ati drivers and make sure the fire wall gets configured

popeye · Aug 18, 2005, 12:43 PM

Thanks, didn't install net frame. Did and works thanks.

H3X4D3C1M4L · Aug 18, 2005, 04:57 PM

Thats a common mistake these days, nothing to fret over

If I didn't slipsteam .NET into my XP disc I'd forget to do it every reformat.

Aug 17, 2005, 06:54 PM	#1
SexPistoL DriverHeaven Senior Member Join Date: Jun 2005 Location: UK Posts: 604 Rep Power: 0	CLI.exe problem When I installed Cat's 5.8 my CPU keeps pulsing from 0% - 33% non stop. When I look in "processes in task manager" CLI.exe is trying to start up but shuts down again. This is constantly happening every second and I believe that is why my CPU keeps going up and down. I am stiill using the Cat 5.8 driver but I have removed the CCC and this has resolved the problem, but I want to use the CCC. Has anyone else come across this before? __________________

Aug 17, 2005, 07:15 PM	Thread Starter #3
SexPistoL DriverHeaven Senior Member Join Date: Jun 2005 Location: UK Posts: 604 Rep Power: 0	I have SP1 for it. I redownloaded 1.1 and SP1 earlier and reinstalled. But that wasn't the problem.......... __________________

Aug 17, 2005, 07:16 PM	#4
Robert McClelland PAX Tweaker, PAX Expert. Join Date: Jun 2002 Location: Somewhere in Wood County Ohio Same Town :) Posts: 10,673 Rep Power: 196 System Specs	Udated your windows installers. Please used autopatcher xp from neowin for all xp downloads __________________ "XTREME AUDIO IS CRAP!" "There no support for it. It's crapist card on face of the earth it should be throw into the sun" http://www.speedtest.net/result/1949536385.png correct the correct one now

Aug 17, 2005, 07:26 PM	Thread Starter #5
SexPistoL DriverHeaven Senior Member Join Date: Jun 2005 Location: UK Posts: 604 Rep Power: 0	I'm using 3.1, that's the latest I think __________________

Aug 17, 2005, 08:05 PM	Thread Starter #6
SexPistoL DriverHeaven Senior Member Join Date: Jun 2005 Location: UK Posts: 604 Rep Power: 0	Come on Terry I know you are around some where....... HELLLLLLLLLLLLP me please __________________

Aug 17, 2005, 07:12 PM	#2
bake15 DriverHeaven Senior Member Join Date: Oct 2004 Location: Wigan,UK Posts: 582 Rep Power: 0	which version of .net framework are you using, if its 1.1 do you have the 2 updates for it?

Aug 17, 2005, 08:26 PM	#7
Stop It HHs' Resident Kitty Lover Join Date: Oct 2004 Location: Biggleswade, UK Posts: 1,432 Rep Power: 78 System Specs	Try uninstalling all of the drivers, use DriverCleaner, then re-install the 5.8s and see if it works, sometimes an installation can go squiffy, it happens, good luck. __________________ Sig Courtesy of Mousey

Aug 17, 2005, 08:31 PM	Thread Starter #8
SexPistoL DriverHeaven Senior Member Join Date: Jun 2005 Location: UK Posts: 604 Rep Power: 0	I have tried 3 times now M8, still no good but thx anyway. __________________

Aug 17, 2005, 09:19 PM	#10
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	If you're running a firewall make sure CLI.exe has access to the local area network (i.e. 127.0.0.x)

Aug 17, 2005, 11:35 PM	Thread Starter #11
SexPistoL DriverHeaven Senior Member Join Date: Jun 2005 Location: UK Posts: 604 Rep Power: 0	How do I do that? __________________

Aug 18, 2005, 02:36 AM	#12
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	Just allow it to have access to the whole internet or whatever.... it wont actually go anywhere and it doesn't report anything and you DID buy the card and legally own it so whats the big deal

Aug 18, 2005, 03:40 AM	Thread Starter #13
SexPistoL DriverHeaven Senior Member Join Date: Jun 2005 Location: UK Posts: 604 Rep Power: 0	Thx for your time guys but it's sussed! WoooooooooooooooHoooooooooo ! Well smooth dvr's and CCC. I like em! The problem was the .net (PANTS) after I reinstalled them earlier there was a hot fix that came in from "Dimdows" all sorted now. Thx again for your time. Hey Hex thx M8............. __________________

Aug 18, 2005, 04:56 AM	#14
popeye DriverHeaven Junior Member Join Date: Jul 2002 Posts: 39 Rep Power: 0	Same problem. I uninstalled and shut down my firewall when installing the 5.8's. I still get that error and ATI drivers aren't there. What am I doing wrong then? Help very much appreciated, thanks.

Aug 18, 2005, 12:43 PM	#16
popeye DriverHeaven Junior Member Join Date: Jul 2002 Posts: 39 Rep Power: 0	Thanks, didn't install net frame. Did and works thanks.

Aug 18, 2005, 04:57 PM	#17
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	Thats a common mistake these days, nothing to fret over If I didn't slipsteam .NET into my XP disc I'd forget to do it every reformat.