Using DVI not possible to turn on TV? with x800pro?

dazzler22 · Sep 9, 2005, 08:21 PM

Hi Peeps,

This is my first post here, I had a prob using my monitor out on my X800pro it is giving a ghoasting effect so i stitched to using the dvi adapter and now all is good except i cannot enable the TV out??? if i do it turns off my monitor and turns on the tv.....

before using the dvi i could have the monitor and the tv with no worries....

What is going on here?

Dazzler....

.....:::System Spec:::.....

3500+ A64 Newcastle Watercooled @ 2420mhz
MSI Neo2 Plat Edition
1024mb Corsair TX3200
4x 36gb Raptors in Raid 0+1 on PCI Highpoint Rocket Raid Adapter
1x 300gb 7200.8 Barracuda
1x 160gb Spinpoint
Audigy 2 ZS + 6.1 Creative Speakers
DVD RW & CDRW

dazzler22 · Sep 9, 2005, 08:43 PM

Ok so an update already, "yea i know that was quick!"

i found out what was causing the ghosting, in bios the agp freq was set to 67 and not 66.

but i would still like to know if it is possible to use DVI and TV at the same time?

Cheers

Dazzler

H3X4D3C1M4L · Sep 10, 2005, 06:28 AM

It sure is. I'm doing it right now

Sep 9, 2005, 08:21 PM	#1
dazzler22 DriverHeaven Newbie Join Date: Sep 2005 Posts: 2 Rep Power: 0	Using DVI not possible to turn on TV? with x800pro? Hi Peeps, This is my first post here, I had a prob using my monitor out on my X800pro it is giving a ghoasting effect so i stitched to using the dvi adapter and now all is good except i cannot enable the TV out??? if i do it turns off my monitor and turns on the tv..... before using the dvi i could have the monitor and the tv with no worries.... What is going on here? Dazzler.... .....:::System Spec:::..... 3500+ A64 Newcastle Watercooled @ 2420mhz MSI Neo2 Plat Edition 1024mb Corsair TX3200 4x 36gb Raptors in Raid 0+1 on PCI Highpoint Rocket Raid Adapter 1x 300gb 7200.8 Barracuda 1x 160gb Spinpoint Audigy 2 ZS + 6.1 Creative Speakers DVD RW & CDRW

Sep 9, 2005, 08:43 PM	Thread Starter #2
dazzler22 DriverHeaven Newbie Join Date: Sep 2005 Posts: 2 Rep Power: 0	Ok so an update already, "yea i know that was quick!" i found out what was causing the ghosting, in bios the agp freq was set to 67 and not 66. but i would still like to know if it is possible to use DVI and TV at the same time? Cheers Dazzler __________________ ---------------------------------------------------------------------------------- .....:::System Spec:::..... 3500+ A64 Newcastle Watercooled @ 2420mhz MSI Neo2 Plat Edition X800Pro 256MB OC'ed 500/500 + VGA Rev4 Silencer 1024mb Corsair TX3200 4x 36gb Raptors in Raid 0+1 on PCI Highpoint Rocket Raid Adapter 1x 300gb 7200.8 Barracuda 1x 160gb Spinpoint Audigy 2 ZS + 6.1 Creative Speakers DVD RW & CDRW [img]images/pure_heaven/buttons/edit.gif[/img]

Sep 10, 2005, 06:28 AM	#3
H3X4D3C1M4L DriverHeaven Extreme Member Join Date: May 2005 Posts: 6,794 Rep Power: 0	It sure is. I'm doing it right now