Installing the ATT

Wizzard · Sep 25, 2005, 12:01 AM

Hi all

Just installed the omega 2.6.71 and ran a few tests, which showed positive figures.
Unfortunately, i didnt install the ATT and multires display when asked to.
I usually overclock my card slightly (400-360) but with the standard control panel display properties, i dont see a option to do this!
P4 3.2
1 gb ram
ATI radeon pro 128 (omega 2.6.71)

How do i overclock my card without the ATT?
Can i just install the ATT again? How?

Thanks
Wiz

PS thanks omega for these drivers.

SexPistoL · Sep 25, 2005, 12:26 AM

Hi Wizzard, just run the Omega set up again, then add them

Wizzard · Sep 25, 2005, 01:16 AM

Hi SexPistol
Thanks for the quick response but when i click on the setup.exe in the omega folder it installs the drivers but does not ask me for the att option?
Am i doing something wrong?
Thanks
Wiz

swimtech · Sep 25, 2005, 02:32 AM

From the Start Menu, All Programs, Radeon Omega Drivers heading, you can't (Re) Install Omega Drivers and chose to install the ATT from there? If that doesn't work, you may have to reinstall the whole package - but you shouldn't need to uninstall anything at all - should be really easy.

If you just want a basic overclocking utility, ATITool 0.24 is a good one for that... That program is available here:

http://downloads.guru3d.com/download.php?det=725

Wizzard · Sep 25, 2005, 05:49 PM

Thanks swimtech. I am using that as we speak but i am noticing that when i boot up it reverts back to my default settings. Is this always the case? How can i make the default boot up my "overclocked" settings? I would like to overclock my seetings to 400 and 360 which isnt much but gets the job done.
Thanks
Wiz

swimtech · Sep 25, 2005, 06:27 PM

Sorry Wizzard, I don't use the tool, but looks to be buried in Startup settings somewhere - at least in version 0.25 beta 7, but it should be with your version as well because the startup setting is not documented as an added feature or fix for the version I just mentioned. If you want to learn more, find the 'Wiki' link on this page - I Googled the ATI Tool to find this...

http://www.techpowerup.com/atitool/

You can download the version 0.25 beta 7 there as well - but don't forget, if you just reinstall the Omegadrive package as a whole, you'll get the ATT and all those goodies...

Sep 25, 2005, 12:01 AM	#1
Wizzard DriverHeaven Newbie Join Date: Dec 2003 Posts: 16 Rep Power: 0	Installing the ATT Hi all Just installed the omega 2.6.71 and ran a few tests, which showed positive figures. Unfortunately, i didnt install the ATT and multires display when asked to. I usually overclock my card slightly (400-360) but with the standard control panel display properties, i dont see a option to do this! P4 3.2 1 gb ram ATI radeon pro 128 (omega 2.6.71) How do i overclock my card without the ATT? Can i just install the ATT again? How? Thanks Wiz PS thanks omega for these drivers.

Sep 25, 2005, 12:26 AM	#2
SexPistoL DriverHeaven Senior Member Join Date: Jun 2005 Location: UK Posts: 604 Rep Power: 0	Hi Wizzard, just run the Omega set up again, then add them __________________

Sep 25, 2005, 02:32 AM	#4
swimtech HardwareHeaven Extreme Member Join Date: May 2002 Location: North Carolina Posts: 4,040 Rep Power: 124 System Specs	From the Start Menu, All Programs, Radeon Omega Drivers heading, you can't (Re) Install Omega Drivers and chose to install the ATT from there? If that doesn't work, you may have to reinstall the whole package - but you shouldn't need to uninstall anything at all - should be really easy. If you just want a basic overclocking utility, ATITool 0.24 is a good one for that... That program is available here: http://downloads.guru3d.com/download.php?det=725 __________________ It's not so much getting your way that matters or not - what matters is how you go about getting it.

Sep 25, 2005, 06:27 PM	#6
swimtech HardwareHeaven Extreme Member Join Date: May 2002 Location: North Carolina Posts: 4,040 Rep Power: 124 System Specs	Sorry Wizzard, I don't use the tool, but looks to be buried in Startup settings somewhere - at least in version 0.25 beta 7, but it should be with your version as well because the startup setting is not documented as an added feature or fix for the version I just mentioned. If you want to learn more, find the 'Wiki' link on this page - I Googled the ATI Tool to find this... http://www.techpowerup.com/atitool/ You can download the version 0.25 beta 7 there as well - but don't forget, if you just reinstall the Omegadrive package as a whole, you'll get the ATT and all those goodies... __________________ It's not so much getting your way that matters or not - what matters is how you go about getting it.

Sep 25, 2005, 01:16 AM	Thread Starter #3
Wizzard DriverHeaven Newbie Join Date: Dec 2003 Posts: 16 Rep Power: 0	Hi SexPistol Thanks for the quick response but when i click on the setup.exe in the omega folder it installs the drivers but does not ask me for the att option? Am i doing something wrong? Thanks Wiz

Sep 25, 2005, 05:49 PM	Thread Starter #5
Wizzard DriverHeaven Newbie Join Date: Dec 2003 Posts: 16 Rep Power: 0	Thanks swimtech. I am using that as we speak but i am noticing that when i boot up it reverts back to my default settings. Is this always the case? How can i make the default boot up my "overclocked" settings? I would like to overclock my seetings to 400 and 360 which isnt much but gets the job done. Thanks Wiz