Deepcool Expands Matrexx 55 Case Series With Two New RGB Equipped Models

Discussion in 'News Discussion' started by MIG-31, Nov 3, 2018.

  1. MIG-31

    MIG-31 HardwareHeaven News Mod Staff Member

    Joined:
    Dec 29, 2002
    Messages:
    71,959
    Likes Received:
    1,551
    Trophy Points:
    153
    Deepcool is expanding their Matrexx 55 series of cases with the Matrexx 55 ADD-RGB 3F and Matrexx 55 ADD-RGB. Both cases will offer addressable RGB LEDs and come pre-programmed with five lighting functions including; static, comet, breathing, dynamic color, and fashion collision. They even include an ADD-RGB lighting strip in the front for good measure. Controlling all of these RGB LEDs is done via a built-in button on the I/O panel, however, users also have the ability to control the LEDs via software such as; ASUS Aura Sync and MSI Mystic Light among others. Finally, to make matters easier on consumers Deepcool has also made sure to support the universal 5 volt 3-pin RGB connector in conjunction with the proprietary GamerStorm RGB connector.

    Unlike the original Matrexx 55 case, both of these new models now feature a power supply shroud giving them an upgraded internal appearance. In regards to differences between the ADD-RGB and ADD-RGB 3F, there is only one and that is the three CF120 ARGB fans included with the 3F model. The ADD-RGB base model has no fans pre-installed. Other than what has been covered, all three Matrexx 55 cases are essentially the same from a base design perspective with all of them using the same internal layout. All three still use the same two 4 mm tempered glass side panels along with the same magnetic dustproof net on top and dust filters in the front and bottom. Availability is expected in November with the Matrexx 55 ADD-RGB 3F costing $75 and the Matrexx ADD-RGB costing $50.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Technical Specifications Matrexx 55 ADD-RGB:

    Motherboard Support: E-ATX/ATX/Micro ATX/Mini-ITX
    Case Type: Middle Tower
    Materials: ABS+SPCC (Steel panel thickness: 0.6 mm) Tempered Glass side panel, front panel (thickness: 4 mm)
    Product Dimensions (L×W×H): 440×210×480 mm
    Net Weight: 6.97 kg
    Gross Weight: 8.01 kg
    5.25″ Drive Bays: 0
    3.5″/2.5″ Drive Bays: 2
    2.5″ Drive Bays: 2+2
    I/O Ports: 1×USB3.0/2×USB2.0/1×Audio(HD)/1×Mic,1×RGB Button
    Expansion Slots: 7
    Power Supply Type: ATX PS2 (Length less than 170 mm)
    Cable Management: 23 mm Clearance
    CPU Cooler Height Limit: 168 mm
    VGA Length Limit: 370 mm
    Cooling Fans Support; Pre-installed: None. Optional: Rear: 1×120 mm; Front: 3×120 mm/ 3×140 mm; Top: 2×120 mm/2×140 mm
    Liquid Cooler Support: Front: 120/140/240/280/360 mm radiator; Top: 120/140/240 mm radiator; Rear: 120 mm radiator
    Carton Dimension (L×W×H): 523×277×514 mm

    Technical Specifications Matrexx 55 ADD-RGB 3F:

    Motherboard Support: E-ATX/ATX/Micro ATX/Mini-ITX
    Case Type: Middle Tower
    Materials: ABS+SPCC (Steel panel thickness: 0.6 mm) Tempered Glass side panel, front panel (thickness: 4 mm)
    Product Dimensions (L×W×H): 440×210×480 mm
    Net Weight: 7.65 kg
    Gross Weight: 8.69 kg
    5.25″ Drive Bays: 0
    3.5″/2.5″ Drive Bays: 2
    2.5″ Drive Bays: 2+2
    I/O Ports: 1×USB3.0/2×USB2.0/1×Audio(HD)/1×Mic,1×RGB Button
    Expansion Slots: 7
    Power Supply Type: ATX PS2 (Length less than 170 mm)
    Cable Management: 23 mm Clearance
    CPU Cooler Height: Limit 168 mm
    VGA Length Limit: 370 mm
    Cooling Fans Support; Pre-installed: 3×120 mm ADD-RGB fans (CF120) at front. Optional: Rear: 1×120 mm; Top: 2×120 mm/2×140 mm
    Liquid Cooler Support Front: 120/140/240/280/360 mm radiator; Top: 120/140/240 mm radiator; Rear: 120 mm radiator
    Carton Dimension (L×W×H) : 523×277×514 mm
     

Share This Page

visited