Kolink Inspire K2 & K3 M-ATX case range with RGB and tempered glass

Discussion in 'News Discussion' started by MIG-31, Jun 21, 2019.

  1. MIG-31

    MIG-31 HardwareHeaven News Mod Staff Member

    Dec 29, 2002
    Likes Received:
    Trophy Points:

    Introducing the latest additions to the Kolink inspire range, the K2 & K3 Micro-ATX cases. Featuring integrated RGB and tempered glass side panels, they offer great value for money at just £32.99.

    Inside the Inspire K2 & K3 series you’ll find support for up to Micro-ATX builds, with room for graphics cards up to 320mm in length and support for up to a 120mm AIO cooler. Perfect for gamers looking for a case that packs a stylish design and RGB lighting.


    Kolink Inspire K2 at a glance:

    – Vented front panel with integrated RGB lighting

    – Tempered glass side panel

    – Support for Micro-ATX and Mini-ITX motherboards

    – Fits graphics cards up to 320mm in length

    – Cooler Clearance of up to 150mm

    – Front I/O panel with 1 x USB 3.0, 1 X USB 2.0 and RGB-LED controls


    Easy to access, install and upgrade components

    Secured by four thumb screws, the tempered glass side panel can be removed to reveal the Inspire K2’s interior, offering a spacious platform for a Micro-ATX motherboard and 320mm graphics card.

    When it comes to cooling your system, there’s a front 120mm mount for either a fan or installing a 120mm AIO, with an additional 90mm rear mount. In terms of cooler clearance, the Kolink Inspire K2 can accommodate coolers up to 150mm in height.


    Storage and connectivity
    In terms of storage, the Kolink Inspire K2 comes with a dual HDD caddy capable of fitting 1 x 3.5″ HDD/SSD and 1 x 2.5″ HDD/SSD. There’s also an additional mount at the bottom of the case capable of supporting an additional 3.5″ or 2.5″ HDD/SSD.

    At the top of the case, you’ll find front I/O support for 1 x USB 3.0, 1 X USB 2.0, an RGB controller and standard 3.5mm audio ports.


    Kolink Inspire K2 & K3 Technical Details:

    Dimensions: 382 x 188 x 393 mm (W x H x D)
    Material: Steel (case), tempered glass (side panel), plastic (front)
    Weight: approx. 3.9 kg
    Colour: Black
    Form factor: Micro-ATX, Mini-ITX
    Total possible fans:
    1x 120 mm (front)
    1x 92 mm (rear)
    Radiator Mountings:
    1x max. 120 mm (front)
    Drive Bays:
    2x 3.5/2.5″ max. (internal, upper cage, bottom)
    1x 2.5″ max. (internal, lower cage)
    PSU: 1x Standard ATX (optional)
    Expansion slots: 4
    I/O Panel:
    1x USB 3.0
    1x USB 2.0
    2x 3,5 mm jack (1x Audio-In / -Out)
    RGB control
    Max GPU length: 320 mm
    Max CPU cooler height: 150 mm







    Avaliable for pre-order at Overclockers UK from £32.99

Share This Page