Kolink launches the new Phalanx case with a hinged tempered glass panel

Discussion in 'News Discussion' started by MIG-31, Mar 6, 2019.

  1. MIG-31

    MIG-31 HardwareHeaven News Mod Staff Member

    Joined:
    Dec 29, 2002
    Messages:
    72,685
    Likes Received:
    1,669
    Trophy Points:
    153
    [​IMG]

    Brushed aluminum front, pre-installed RGB fans and a hinged tempered glass panel
    Now available at Overclockers UK, the new Kolink Phalanx is a great value midi-tower that comes with a range of comprehensive features, perfect for builders of all experience.

    The Phalanx comes with a brushed aluminum front panel, offering a customisable display through it’s central mesh air-intake via four pre-installed 120mm RGB fans. These offer a full out of the box air cooling solution, as well as the ability to cycle through a range of colours using the RGB controller on it’s top mounted I/O panel. Should you wish to watercool your build there’s radiator slots for a 280/240mm top mount, 240mm front mount and an additional 120mm rear mounted radiator.

    Internals are easily accessed by a hinged tempered glass side panel, making building a hassle free experience, with an angled motherboard mount for easy cable management. There’s also a vented PSU shroud to cover components and cable management in the lower compartment, with cable routing for minimal exposure in the full build.

    [​IMG]

    Kolink Phalax at a glance:

    – Black Anodised Aluminium design, brushed aluminun front panel and mesh intake

    – 4 Pre-installed 120mm RGB Dual Ring fans with RGB Controller

    – Hinged tempered glass side panel, with thumb screw locks for transportation

    – Room for up to E-ATX motherboards, with a maximum GPU length up to 370mm

    – Support for up to 6 x 120mm fans (3 x 120mm front, 2 x 120/140mm top and 1 x 120mm rear)

    – Watercooling mounts for up to – 1 x 240/280mm (top) and 1 x 240 mm (front) radiator

    – Vented PSU Shroud for concealing lower compartment

    – Comprehensive cable management options

    – Storage capacity configurations for up to 2 x 3.5″ HDD + 2 x 2.5″ SSD or 4 x 2.5″ SSD

    [​IMG]

    Easy to access, install and upgrade components
    The Kolink Phalanx comes with a hinged tempered glass panel, this can be secured in place with two thumb screws when transporting your system or removed entirely by simply lifting it off. This gives you access to the main compartment, with a motherboard mount supporting up to E-ATX and angled for easy cable management to the rear case compartment. The Phalanx supports graphics cards up to 370mm in length, with a cooler clearance of 160mm.

    [​IMG]

    Air and water-cooling configurations
    The Kolink Phalanx comes pre-installed with 4 x 120mm RGB fans, with optional top mounts for another 2 x 140/120mm. Should you choose, the front 3 x 120mm fans can also be exchanged for 3 x 140mm, with cables routed through a section in the top right of the case.

    The fans are all connected into and RGB controller, this supports up to a total of 6 x 6-pin RGB fans and an additional 2 x 4-pin RGB LED strips. The bundled 3-pin connector allows users to install an RGB-LED controller/fan hub to work with a compatible motherboards, allowing for a more advanced control of the RGB lighting effects.

    The Phalanx supports a range of water-cooling configurations, for builds which feature overclocked components, with radiators support for a 280/240mm top mount, 240mm front mount and 120mm rear mounted radiator.

    [​IMG]

    Connectivity and Storage Solutions
    When it comes to storage capacity, the Kolink Phalanx packs a dual 3.5″/2.5″ HDD caddy with an additional 2 x 2.5″ SSD mounts located on the back of the motherboard mount.

    The Phalanx’s top mounted I/O comes with 2 x USB 2.0, 1 x USB 3.0, Power, RGB controller and audio.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Available at Overclockers UK from £79.99
     

Share This Page

visited