Kolink release the Levante case – An ultimate budget case solution for just £72.95

Discussion in 'News Discussion' started by MIG-31, Aug 3, 2018.

  1. MIG-31

    MIG-31 HardwareHeaven News Mod Staff Member

    Joined:
    Dec 29, 2002
    Messages:
    71,935
    Likes Received:
    1,540
    Trophy Points:
    153
    Kolink have become a brand which works to bring quality, comprehensive case solutions, at an affordable price. The Levante is no exception featuring a double tempered glass panel design, full mesh front, PSU shroud, four pre-installed RGB Fans, an RGB controller and remote for just £72.95.

    [​IMG]

    The case was designed with double glass panel design to show off RGB internals, but with the full mesh front and 12 small vents located in the top to provide that much needed airflow for high performance gaming builds.

    [​IMG]

    An overview of the Kolink Levante:

    Midi Tower case 440 x 206.5 x 475mm(HxWxD)
    Holds up to E-ATX form factor motherboards
    Fits graphics cards up to 380mm
    Installs up to 6 x 120mm fans
    Water-cooling support for 2 x 240mm radiators
    Including RGB lighting controller and remote
    PSU Shroud Included

    [​IMG]

    Air-cooled out of the box with support for water-cooling
    When it comes to configuring your build, the Levante supports up to an E-ATX sized motherboard and a full size 380mm GPU for both entry level and high-end specifications. Air-cooling comes from it’s four pre-installed RGB LED fans, three behind the front mesh panel and one in the back. There’s also the option for up to two additional 2 x 120mm top mounted fans, with 12 small mesh vents installed in the top of the case to increase air-flow. The built in RGB controller supports not only up to 6 x 120mm fans but also two LED strips.

    If you’d perfer to watercool your build, the Levante can be configured with 2 x 240mm radiators mounted in the front and top panals, perfect for cooling both GPU and CPU.

    [​IMG]

    Storage and connectivity options

    The Kolink Levante has an abundance of storage options, with mounts for 3 x 3.5″ HDD/SSD drives and 2 x 2.5″ HDD/SSD drives. The front I/O located at the top of the case includes a USB 3.0 port, individual audio ports for mics and headphones, an RGB controller button and two USB 2.0 ports.

    Finally a bundled PSU shroud helps present a clean finish to the finished system, with excellent cable management options that are essential for glass panel display.

    SPECIFICATION:

    Model: Levante
    Form factor: Midi Tower Case
    Motherboards Supported: E-ATX/ATX/M-ATX/ITX
    Case Dimensions: 440 x 206.5 x 475mm
    Type: Midi Tower Case
    Colour: Matte Black with tempered glass side panels.
    Case Material: 0.6mm Steel/Tempered Glass/Plastic/Mesh
    Fans included: 4x 120mm Ring Rainbow RGB fans
    Accessories included:
    1x RGB control box (supports up to 6 x fans and 2 x RGB strips with over 350 different options and modes)
    remote control for RGB lighting
    PSU shroud
    Drive bays:
    Supported GPU specifications: 380mm VGA cards (max)
    Supported fan cooling components:
    Front – 3 x 120mm RGB Ring Fan (included)
    Rear – 1 x 120mm RGB Ring Fan(included)
    Top – 2 x 120mm (optional)
    Supported water cooling components:
    Front – Up to 240mm
    Top – Up to 240mm
    External connections:
    1 x USB3.0 on the front
    2 x USB2.0
    2 x Audio ports(headphones & mic)

    Avaliable at Overclockers UK for just £72.95
     

Share This Page

visited