PAX_SBZ_CD_L13_1_00_22_2013_V1.00 Official live

Discussion in 'PAX Drivers' started by Robert McClelland, Jul 17, 2013.

  1. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,327
    Likes Received:
    253
    Trophy Points:
    108
    That why I reload the first version 7.12 one :) You can change the frequency in the headphone ini The control must be set by analyzing the frequency parameters used between 10Hz~30kHz.## put your correct headphone settings in there. There also one for speaker mode too.
     
  2. doubleohseven

    doubleohseven New Member

    Joined:
    Jun 19, 2011
    Messages:
    79
    Likes Received:
    0
    Trophy Points:
    0
    I already knew about the speaker.ini, however I was unaware about the headphone.ini, thanks.

    Well that is what I was asking you earlier, if you uploaded a new set or not but I never got a clear answer. So I should re-install now?
     
  3. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,327
    Likes Received:
    253
    Trophy Points:
    108
    Ya go back download one of 8.12.13 one :) But make sure you save your inf first before you reinstalled it.
     
  4. doubleohseven

    doubleohseven New Member

    Joined:
    Jun 19, 2011
    Messages:
    79
    Likes Received:
    0
    Trophy Points:
    0
    Is the driver at the top of this page 8/12? It's still dated 7/22, which means you have a newer one? Where is it?
     
  5. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,327
    Likes Received:
    253
    Trophy Points:
    108
    I could rebuild it no biggie lol How about this I PM you media fire set when ready let me know if it installs. :)
     
  6. .Infinity

    .Infinity New Member

    Joined:
    Jun 11, 2013
    Messages:
    5
    Likes Received:
    0
    Trophy Points:
    0
    Hi Robert! Just installed the current version of your SBZ configuration and it's perfect as always (; Thx for the nice support and keep on going!

    Driver I used before:pAX_SBZ_CD_L13_1_00_20_BETA_V1.00(working)
    Driver I am using now:pAX_SBZ_CD_L13_1_00_22_2013_V1.00(working)

    Greetings to everyone :)
     
  7. doubleohseven

    doubleohseven New Member

    Joined:
    Jun 19, 2011
    Messages:
    79
    Likes Received:
    0
    Trophy Points:
    0
    Yeah thats totally fine, waiting for your PM!
     
  8. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,327
    Likes Received:
    253
    Trophy Points:
    108
    Ya sorry about today it was special day about ps4 launch date was watching this afternoon and waiting on nhl 14 demo ;)
     
  9. doubleohseven

    doubleohseven New Member

    Joined:
    Jun 19, 2011
    Messages:
    79
    Likes Received:
    0
    Trophy Points:
    0
    No problem, just PM me when you got it ready.
     
  10. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,327
    Likes Received:
    253
    Trophy Points:
    108
  11. SMoebius

    SMoebius New Member

    Joined:
    Sep 20, 2013
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    AW: PAX_SBZ_CD_L13_1_00_22_2013_V1.00 Official live

    Hello Robert,
    hello all,

    i got a new Soundblaster Z (pci-e). Prior to that i had a audigy 2 ZS installed with Pax drivers. I uninstalled and cleaned and then first installed the latest creative drivers for the Z. I had issues with microphonelevels and i had no audible surround sound emulation.

    I uninstalled and cleaned with DriverSweeper and DriverCleaner and went for your PAX driver "PAX_SBZ_CD_L13_1_00_22_2013_V1.00". Rebooted. The microphone is ok now, audio is fine but still i have no surround sound emulationin my stereoheadphones. SBX Pro Studio is on and at surround at maximum. Speakers are set to headphone. But the plane in the test-video flies from right to left but not from front to back). It all sounds stereo. Also in Battlefield 3 - all stereo - no directional audio.

    I then tried to switch the card from the PCIe-1 Slot to the other PCIe-16 Slot. I uninstalled, cleaned, and reinstalled the Pax Driver. Same Problem - good audio but no SBX.

    What can i do? Please help. I don't want to return this card.

    Kind regards,
    Stephan
     
  12. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,327
    Likes Received:
    253
    Trophy Points:
    108
    Re: AW: PAX_SBZ_CD_L13_1_00_22_2013_V1.00 Official live

    Did you installed creative drivers first before mine? You may need do this. Sometimes it does that once while even all creative cards. Because it need offical drivers before my tweaks to work.
     
  13. SMoebius

    SMoebius New Member

    Joined:
    Sep 20, 2013
    Messages:
    2
    Likes Received:
    0
    Trophy Points:
    1
    AW: Re: AW: PAX_SBZ_CD_L13_1_00_22_2013_V1.00 Official live

    I will try to do that. So do i understand you correctly? I do not remove/clean the creative drivers and then install your drivers over them?
     
  14. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,327
    Likes Received:
    253
    Trophy Points:
    108
    Ya but make sure driver sign is disable.
     
  15. DJRiful

    DJRiful New Member

    Joined:
    Oct 26, 2013
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    1
    Hi Robert, coming from the 4th most popular thread on Overclock.net audio section here: goo.gl/by1seu

    I have few things to ask, since I am left a bit confused how exactly you install PAX driver.

    All I know I need to install the original driver then run the setup.exe from PAX folder. It will ask for Modify / Repair / Uninstall. Obviously not Uninstall but Modify or Repair?
     
  16. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,327
    Likes Received:
    253
    Trophy Points:
    108
    You need disable drivers sign new version be out this coming week :) with updated tweaks if you like wait I will posted new sets there again soon sorry if I haven't been there in long while been very busy in NHL 14 lol
     
  17. doubleohseven

    doubleohseven New Member

    Joined:
    Jun 19, 2011
    Messages:
    79
    Likes Received:
    0
    Trophy Points:
    0
    Release them tonight before the midnight release of BF4!!!
     
  18. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,327
    Likes Received:
    253
    Trophy Points:
    108
    I try work on new set soon :) been sick pass couple days seeing doc tomorrow at 2. I will try get set uploading with v1.05 tonight would see while watching raw hehe
     
  19. radek.god

    radek.god New Member

    Joined:
    Mar 19, 2014
    Messages:
    1
    Likes Received:
    0
    Trophy Points:
    0
    Bad drivers - SPDIF multichannel crap

    I see no difference between this and official driver.Unfortunatelly, there is some bug on both drivers , try this :

    connect SB Z with receiver over optical SPDIF out.Set speaker config at windows and at creative control pannel to 5.1
    It does not matter You use DDlive or DTS connect with/without neo
    Try watch movies with DD/DTS

    All looks fine.After random time (1 or much more minutes) sound goes bad.
    Front left channel play at Rear left, center went to subwoofer etc = card is useless )

    I have to set speakers to 2.0 and then to 5.1 or disable and enable DD/DTS ebcoding at control panel, really annoying , no fun with playing or watching movies

    I tried search more forums and info at google, so I am NOT the only one with this problem :-(

    If anyone has permament solutione , please provide me with it :)

    I will try revert to 1.00.16, hope it helps ...
     
  20. Robert McClelland

    Robert McClelland I'm An Uncle for 2nd time Staff Member

    Joined:
    Jun 25, 2002
    Messages:
    15,327
    Likes Received:
    253
    Trophy Points:
    108
    Did you try dts dolby decoder encoder box? They got one on amazon 60 bucks
     

Share This Page

visited