Just Visiting
Monday | June 14, 2021
Corsair Vengeance C70 Case Review

Corsair Vengeance C70 Case Review

Corsair Vengeance C70 Mid-Tower Case Review

Corsair Vengeance C70 Case – Internal

Corsair Vengeance C70 inside Corsair Vengeance C70 rear inside
The C70 is suitable for ATX and m-ATX boards and as is always good to see the inside continues the paintwork from the external surface. A CPU cutout is present to allow installation of larger heatsinks and the wiring holes are all rubber lined to maximise the tidiness of our build.
Corsair Vengeance C70 PSU bay location Corsair Vengeance C70 rear exhaust location

Standard front panel connectors are provided on the C70 and as noted earlier those without a USB 3.0 connector on their board can use the bundled 3.0 to 2.0 cable. Also show above is the top radiator space and we also note that rubber liners are pre-installed for our fan locations and the motherboard stand-offs applied at the factory too.

Corsair Vengeance C70 drive bays Corsair Vengeance C70 drive bays

The 5.25" drive bays use a nice simple latch for their tool free install and screw holes are provided for extra support. Down at the 2.5/3.5" bays we can see the two pre-installed 12cm intake fans and that the case uses plastic drive brackets suitable for mechanical or solid state drives.

About Author

Stuart Davidson

It appears you have AdBlocking activated

Unfortunately AdBlockers interfere with the shopping cart process

To continue with the payment process can we ask you to

deactivate your AdBlocking plugin

or to whitelist this site. Then refresh the page

We thank you for your understanding

Hardwareheaven respect you right to employ plugins such as AdBlocker.
We would however ask you to consider whitelisting this site
We do not allow intrusive advertising and all our sponsors supply items
relevant to the content on the site.

Hardwareheaven Webmaster