Home » News » Fara H1M Pro: micro-ATX box at Silverstone! Fara H1M Pro: micro-ATX box at Silverstone! OCC_FrTeam January 20, 2021 News Small tour at Silverstone which announces a new case reference. The brand is launching a new model in micro-ATX format with its Fara H1M Pro. A “plus” version of the Fara H1 M we were telling you about recently. Fara H1M Pro: A micro-ATX box with mesh front panel! First of all, we start with the dimensions. This model measures 210 (W) x 366 (D) x 392 (H) mm, which makes it rather compact. In terms of weight, it is also very light with less than 5 kg on the scale. Inside, there will be space for motherboards in micro-ATX, mini-DTX and mini-ITX format. At the same time, we are looking at a compact model. On the GPU side, ditto, no special restrictions with 32 cm of free space. The ventirad can measure up to 160 mm high and the power supply 16 cm with HDD cage, 25 cm without. Speaking of HDD cages, you should know that we will have up to four storage locations. Thus, via an HDD cage we will be able to install either two 3.5″ units or one 3.5″ unit and a second 2.5″ unit. Finally, two 2.5″ slots are on the back of the motherboard tray. However, they are still badly positioned: on the cable entries, as for the Fara H1 M. We quickly finish with the cooling, which will be able to accommodate 240 mm watercooling radiators in the façade. At the rear, there is a space for 120 mm. On the ventilation side, the box offers up to five 120 mm slots: two at the top, two at the front and one at the rear. Finally, what is the difference with the non “Pro” model? The ventilation, quite simply. Here, this model comes with three RGB fans: two on the front and one at the back. The basic model was content with a single non-luminous mill at the rear. For the moment, prices have still not been communicated, but there is no doubt that this version will be more expensive than the non ‘pro’ model. The question remains, by how much? Click here for the Silverstone data sheet! Share On