Just Visiting
Thursday | October 22, 2020
Kolink Big Chungus UNIT Edition

Kolink Big Chungus UNIT Edition

Stunning design, ready for high-performance hardware! The spectacular Big Chungus UNIT Edition showcase improves on a variety of aspects over the original case, which itself set a new standard in form and function. Big Chungus UNIT Edition features plenty of tempered glass and also room for EATX motherboards.

The Kolink Bug Chungus UNIT Edition Case At a Glance:

An extravagant showcase for motherboards up to E-ATX
Both side parts, front and lid made of tinted tempered glass
Base made of high-quality black anodized aluminum
Five pre-installed 120mm PWM fans with digitally addressable RGB-LEDs
Two pre-installed ARGB strips
ARGB-LED PWM controller with infrared remote control
Alternative RGB control via the motherboard using 3-pin 5VDG connector
Graphics cards up to 335 millimeters, CPU cooler up to 175 mm
Supports 2 x 2.5″/3.5″ + 2 x 2.5″ drives
I/O Panel with 1x USB 3.1 Type C, 1x USB 3.1, 1x USB 2.0, Audio In/Out

The Perfect Way To Show off Hardware
Thanks to the tinted tempered glass panels on both sides, as well as on the lid and on the front, Big Chungus is the perfect place for some powerful gaming hardware. A motherboard up to E-ATX form factor will fit in this spacious frame. Graphics cards up to a length of 335 millimeters can be installed, with CPU coolers up to 175 millimeters high. Thanks to the large cut-outs in the frame, the case remains remarkably light despite its size. This also ensures an optimal air supply from the outside.

The angular case sits slightly angled upwards on a distinctive base, which is also made of black anodized aluminum. The I/O panel offers excellent connectivity, with a modern USB 3.1 Type C port as well as a USB 3.1 and a USB 2.0 port. With this variety of connections, almost all USB peripherals can be used directly on the case, whether keyboard and mouse, external USB data carriers, or even smartphones, which can even be charged there.

Ample Space For Air and Water Cooling
Five 120 mm PWM fans with digitally addressable dual ring RGB-LEDs are already pre-installed. Four of them adorn the front and can be admired via the tinted tempered glass. A further 120 mm PWM fan, also with digitally addressable RGB-LEDs, is integrated into the single fan slot on the rear. Two additional 120 mm fans can be installed under the lid and three 120 mm fans can be installed in the bottom. Accordingly, the fans can also be replaced by radiators. 360 mm radiators can be mounted on the base and front, and there is room for a 240 radiator in the roof. The ATX power supply unit (available separately) is mounted beneath the three fan slots on the base and is hidden by the base. It can be up to 220 millimeters in length.

One feature that stands out visually is the versatile PWM fan and ARGB controller, which is mounted behind the motherboard tray. The five pre-installed fans are connected to it. The two ARGB-LED strips are connected at the side. Additionally, there are 5 more slots available for other 6-Pin fans if needed. The ARGB-LED lighting is controlled via an included infrared remote control. The controller/hub can also be connected to a motherboard via a cable, and the ARGB LEDs can then be synchronized with other ARGB components. The fans are also PWM controlled via the cable connecting to the controller.

Specification:

Dimensions: 668 x 336 x 651 mm (H x W x D)
Weight: approx. 16 kg
Material: steel, aluminium, tempered glass (sides), plastic
Colour: Black
Form Factor: E-ATX, ATX, Micro-ATX, Mini-ITX
Fans possible in total:
4x 120 mm (front side)
2x 120 mm (cover)
1x 120 mm (backside)
3x 120 mm (floor)
Pre-installed:
4x 120 mm (front, PWM, digitally addressable RGB-LEDs)
1x 120 mm (back panel, PWM, digitally addressable RGB-LEDs)
Fan/ARGB controller/Hub:
Outputs:
10x 6-pin (ARGB/PWM)
2x 3-pin ARGB (5VDG)
Inputs:
1x 3-Pin ARGB (connection with the motherboard)
1x PWM 1x SATA power (for power supply)
Radiator mountings (reduces the number of HDD and/or fan mounting locations):
1x max. 360 mm (front side)
1x max. 240 mm (cover)
1x max. 120 mm (backside)
1x max. 360 mm (bottom)
Power supply: 1x standard ATX (optional)
Expansion slots: 7
Drive Bays:
2 x 2.5″/3.5″ + 2 x 2.5″
I/O Panel:
1x USB 3.1 Type C
1x USB 3.1
1x USB 2.0
1x Audio In/Out
Maximum graphics card length: 335 mm
Maximum CPU cooler height: 175 mm
Maximum length ATX power supply: 220 mm

About Author

MIG-31

It appears you have AdBlocking activated

Unfortunately AdBlockers interfere with the shopping cart process

To continue with the payment process can we ask you to

deactivate your AdBlocking plugin

or to whitelist this site. Then refresh the page

We thank you for your understanding


Hardwareheaven respect you right to employ plugins such as AdBlocker.
We would however ask you to consider whitelisting this site
We do not allow intrusive advertising and all our sponsors supply items
relevant to the content on the site.

Hardwareheaven Webmaster

visited